EPEVER WiFi 2.4G RJ45 D Adapter

Important Information

Thanks for selecting the EPEVER WiFi 2.4G RJ45 D adapter. Please read this manual carefully before using the product.

Warning: Do not install the product in humid, salt spray, corrosion, greasy, flammable, explosive, dust accumulative, or other severe environments.

1. Overview

Through a local 2.4G WiFi network, the EPEVER WiFi 2.4G RJ45 D can transmit all operational data from the EPEVER solar controller, inverter, or inverter/charger to the EPEVER cloud server in real time. Users can remotely monitor the connected devices and program parameters via the EPEVER server platform and mobile APP.

Features

• Applicable to EPEVER controllers, inverters, or inverter/charger with RJ45 port
• Use immediately after connecting; easy and convenient operation
• Directly powered by the communication port
• Up to 20 meters of communication distance
• Support the Local monitoring and "EPEVER Cloud" working mode.

2. Appearance

RJ45 connector: Connect to the RJ45 port of the controller, inverter, or inverter/charger. RJ45 Pin Definition:

3. Specifications

Note: The WiFi adapter working voltage is 4.5V~5.5V and peak emission is 150mA, which is only suitable for devices that meet this requirement.

4. Working processes

Scenario 1: There is a local 2.4G WiFi network. The WiFi adapter can upload the collected data to the EPEVER cloud automatically.

1. Step 1: Turn on the WiFi switch on the mobile phone, and connect to the local WiFi network (a 2.4G WiFi network is a must).
2. Step 2: Login to the APP and click the [add icon] to add a new gateway.
3. Step 3: Select the gateway model.
4. Step 4: Input the gateway data ("Gateway SN" is the 22-digit number of the gateway WiFi name), and click "Next Step" to enter the device adding page.
5. Step 5: After adding the device, click "Next Step" to enter the above page.
6. Step 6: Input the local WiFi password and click "Next Step."
7. Step 7: Click "Go to set up Wi-Fi" to connect phone to the gateway WiFi (HN_EPSN: XXXXXX, password: 12345678). Return to the APP after connection, and click "Next Step."
8. Step 8: After the gateway is successfully connected, connect the phone to local WiFi or 4G that can access the Internet. Then you can monitor the device through the APP.

Scenario 2: There is no local 2.4G WiFi network. The WiFi adapter cannot upload the collected data to the EPEVER cloud.

1. Step 1: Login to the APP and click "My > Collect Data." Select all products and click the "Synchronize data" to download data.
2. Step 2: After all data is downloaded, return to the APP. Click the "Home > Offline."
3. Step 3: Select the module type (WIFI).
4. Step 4: Turn on the phone WiFi switch and connect the phone to the gateway WiFi (HN_EPSN: XXXXXX, password: 12345678).
5. Step 5: Return to the APP and click "Equipment > Add equipment" ("Gateway SN" is the 22-digit number of the gateway WiFi name). Click "Confirm" to add the device.
6. Step 6: On the "Device List" page, click the gateway SN to enter the device's real-time monitoring page.

Any changes without prior notice!

Version number: V1.1