ASUS TUF Gaming BE3600 Dual-Band WiFi Router Quick Start Guide

Hardware Explanations

I/O Ports Overview

WAN (Internet) LED

2.4GHz WiFi LED

Power LED

LAN LED

5GHz WiFi LED

Gigabit WAN/LAN1 port

LAN 2~4 ports

Power (DCIN) port

WPS button

USB 3.2 Gen 1 port

Power button

Reset button

2.5G Gigabit WAN/LAN1 port

Specifications

Networking Solutions: FAST Networking, FARTHEST, EASY, SECURE, TRUSTED

DC Power adapter: DC Output: +12V with 2A current

Operating Temperature: 0~40°C

Storage Temperature: 0~70°C

Operating Humidity: 50~90%

Storage Humidity: 20~90%

Router Setup Steps

01 Prepare your Modem

1. Unplug the power of cable/DSL modem.
2. Connect your modem to the WAN port at the back side of the router with the network cable provided.
3. Power on the modem. Plug modem to the power outlet and power on.
4. Check the modem LED lights to ensure the connection is active.

Note: If you are using DSL for internet, you will need your username/password from your Internet Service Provider (ISP) to properly configure your router.

Diagram Description: Images show unplugging the modem, connecting the network cable from the modem to the router's WAN port, and powering on the modem.

02 Install your Router

1. Plug the adapter into the DCIN port, and press the Power button.
2. The power LED will light up when the hardware is ready.

Diagram Description: Images show plugging the power adapter into the router and pressing the power button. The power LED illuminates.

Setup via App

1. On your iOS or Android mobile device, go to the app store, search for ASUS Router, and download the app.
2. On your iOS or Android mobile device, tap Settings > Wi-Fi, connect to the default network SSID shown on the product label on the bottom side of the router. Or scan the QR code on the product label to connect to the default network SSID.
3. Launch ASUS Router App and follow the instructions to complete the setup.

Diagram Description: Images show QR codes for downloading the ASUS Router app from Google Play and the App Store, and a smartphone displaying the ASUS Router app interface.

Setup via Web Browser

1. Wired: Connect your PC to a LAN port at the back side of the router using an additional network cable.
2. Wireless: Connect to the network with the default SSID shown on the product label on the bottom side of your router "ASUS_XX". (XX refers to the last two digits of the MAC address, found on the label on the back of your router.)
3. Open a web browser. You will be redirected to the ASUS Setup Wizard. If not, navigate to http://www.asusrouter.com/.
4. Follow the instructions to complete the setup.

Diagram Description: Images show connecting a PC to the router via a LAN cable, and a smartphone connecting wirelessly to the default SSID. A screenshot of the ASUS router.com setup wizard is also shown.

FAQ FREQUENTLY ASKED QUESTIONS

Q1: Where can I find more information about the wireless router?

Technical support site: https://www.asus.com/support

Customer hotline: Refer to the Networks Global Hotline Information section in this Quick Start Guide.

Video Tutorials: https://qr.asus.com/wl_videotutorials

Service and Support

ASUS Recycling/Takeback Services: ASUS recycling and takeback programs are part of a commitment to environmental protection. Find detailed recycling information at https://esg.asus.com/en/Takeback.htm.

REACH: In compliance with the REACH regulatory framework, chemical substances in ASUS products are published on the ASUS REACH website at https://esg.asus.com/Compliance.htm.

Regulatory Information

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Caution Statement: WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Prohibition of Co-location: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual. This device is restricted for indoor use.

WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 51cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information: The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This equipment should be installed and operated with a minimum distance of 31cm between the radiator and any part of your body.

This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada's REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html

Additional Canadian information on RF exposure also can be found at the following web: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED): Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

La bande 5150 - 5250 MHz est réservée uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

CAN ICES-003(B)/NMB-003(B)

Informations concernant l'exposition aux fréquences radio (RF): La puissance de sortie émise par cet appareil sans fil est inférieure à la limite d'exposition aux fréquences radio d'Innovation, Sciences et Développement économique du Canada (ISED). Utilisez l'appareil sans fil de façon à minimiser les contacts humains lors d'un fonctionnement normal. Cet équipement doit être installé et utilisé avec un minimum de 31cm de distance entre la source de rayonnement et votre corps.

L'utilisation de cet appareil est autorisée au Canada. Pour consulter l'entrée correspondant à l'appareil dans la liste d'équipement radio (REL - Radio Equipment List) d'Innovation, Sciences et Développement économique du Canada, rendez-vous sur : http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html

Pour des informations supplémentaires concernant l'exposition aux fréquences radio au Canada, rendez-vous sur : https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

For indoor use only.

Pour une utilisation en intérieur uniquement.

Safety Notices

Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).

Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT place or drop objects on top and do not shove any foreign objects into the product.

DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.

DO NOT cover the vents on the product to prevent the system from getting overheated.

DO NOT use damaged power cords, accessories, or other peripherals.

If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

DO NOT mount this equipment higher than 2 meters.

Consignes de sécurité: Utilisez ce produit dans un environnement dont la température ambiante est comprise entre 0°C (32°F) et 40°C (104°F). Référez-vous à l'étiquette située au dessous du produit pour vérifier que l'adaptateur secteur répond aux exigences de tension. NE PAS placer sur une surface irrégulière ou instable. Contactez le service après-vente si le châssis a été endommagé. NE PAS placer, faire tomber ou insérer d'objets sur/dans le produit. NE PAS exposer l'appareil à la pluie ou à l'humidité, tenez-le à distance des liquides. NE PAS utiliser le modem lors d'un orage. NE PAS bloquer les ouvertures destinées à la ventilation du système pour éviter que celui-ci ne surchauffe. NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres périphériques endommagés. Si l'adaptateur est endommagé, n'essayez pas de le réparer vous-même. Contactez un technicien électrique qualifié ou votre revendeur. Pour éviter tout risque de choc électrique, débranchez le câble d'alimentation de la prise électrique avant de toucher au système. Ne placez pas cet appareil à une hauteur supérieure à 2 mètres.

Información de seguridad: Use este producto en entornos sometidos a una temperatura ambiente comprendida entre 0 °C (32°F) y 40 °C (104 °F). Consulte la etiqueta de valores nominales situada en la parte inferior del producto y asegúrese de que su adaptador de alimentación cumple con dichos valores. NO coloque el equipo sobre una superficie irregular o inestable. Solicite asistencia técnica si la carcasa resulta dañada. NO coloque ni deje caer objetos en la parte superior del producto y no introduzca objetos extraños dentro de él. NO exponga el equipo a líquidos, lluvia o humedad, ni lo use cerca de ninguno de tales elementos. NO use el módem durante tormentas eléctricas. Para evitar que el sistema se sobrecaliente, no cubra las ranuras de ventilación del producto. No intente reparar la fuente de alimentación personalmente si se avería. Póngase en contacto con un técnico de mantenimiento autorizado o con su distribuidor. A fin de evitar posibles descargas eléctricas, desconecte el cable de alimentación de la toma de suministro eléctrico antes de cambiar la posición del sistema. NO monte este equipo a una altura superior a 2 metros.

Informações de segurança: Utilize este equipamento em ambientes com temperaturas entre 0°C (32°F) e 40°C (104°F). Verifique a etiqueta relativa à tensão na parte inferior do seu dispositivo e assegure-se de que o seu transformador corresponde a essa tensão. NÃO coloque o computador em superfícies irregulares ou instáveis. Envie para reparação se a caixa se encontrar danificada. NÃO coloque nem deixe cair objetos em cima do aparelho e não introduza quaisquer objetos estranhos no produto. NÃO exponha o equipamento nem o utilize próximo de líquidos, chuva ou humidade. NÃO utilize o modem durante tempestades eléctricas. NÃO tape os orifícios de ventilação do produto para impedir o sobreaquecimento do sistema. NÃO utilize cabos de alimentação, acessórios ou outros periféricos danificados. Se a fonte de alimentação estiver avariada, não tente repará-la por si próprio. Contacte um técnico qualificado ou o seu revendedor. Para evitar o risco de choque eléctrico, desligue o cabo de alimentação da tomada eléctrica antes de deslocar o sistema. NÃO instale este equipamento a uma altura superior a 2 metros.