Dbit AX1500 WiFi6 Whole Home Mesh WiFi System

Package Contents

The package typically includes:

• Dbit Mesh WiFi Device(s)
• Power Adapter(s)
• Ethernet Cable
• Quick Installation Guide

Note: Specific contents may vary by region or package.

Device Overview

The Dbit Mesh WiFi device features:

• Power Port
• WAN/LAN Port
• Reset Button
• Status Indicator Light

Refer to the diagram for precise locations.

Installation Steps

1. Connect the primary device: Plug the power adapter into the Dbit Mesh WiFi device and connect it to a power outlet. Connect the device to your modem using an Ethernet cable.
2. Power on: Wait for the device to boot up. The indicator light will show its status.
3. Download the Dbit App: Search for "Dbit" in your mobile device's app store (iOS or Android) and download the application.
4. Configure the network: Open the Dbit app and follow the on-screen instructions to set up your WiFi network. This typically involves creating a WiFi name (SSID) and password.
5. Add secondary devices (if applicable): If you have multiple devices for a mesh network, follow the app's instructions to add and synchronize them with the primary device. Place secondary devices in areas where you want to extend WiFi coverage.

App Usage

The Dbit app allows you to:

• Monitor network status
• Manage connected devices
• Change WiFi settings
• Perform firmware updates
• Set up guest networks
• Utilize parental controls

Refer to the app's help section for detailed features.

Troubleshooting

No Internet Connection:

• Ensure all cables are securely connected.
• Restart your modem and the Dbit Mesh WiFi device.
• Check your internet service provider status.

Slow WiFi Speed:

• Ensure devices are within optimal range of the Mesh WiFi units.
• Minimize interference from other electronic devices.
• Update device firmware via the Dbit app.

Cannot connect to WiFi:

• Verify you are using the correct WiFi password.
• Restart the Dbit Mesh WiFi device.

Resetting the device: If issues persist, use a pin to press and hold the reset button for approximately 10 seconds to restore factory default settings.

Specifications

Regulatory Information

This device complies with relevant regulations. Please refer to the full user manual or Dbit website for detailed compliance information.