DBIT AC1200 Firmware Upgrade Clarification

If you encounter a situation where you cannot change the WiFi name and password, you can use the provided download link to obtain the firmware file. Manually upgrade the firmware through the management interface. Once the upgrade is complete, the issue should be resolved.

Firmware file download address: http://help2.szweita.com/download/AC1200GE_V2_0_1.bin

Step 1: Accessing the Upgrade Interface

The following steps detail how to upgrade the Access Point firmware to the latest version. It is crucial not to power off the device during the upload process, as this may cause the system to crash.

The management interface displays options for Reboot, Restore Configuration, Upgrade, and Schedule Restart.

Within the management interface, navigate to 'Management' and then 'Device Management' or 'Remote Management'. The 'Upgrade Firmware' section is where the local upgrade process begins.

The current Firmware Version is displayed as V2.0.1.

To perform a local upgrade:

• Locate the 'Select File:' field.
• Click the 'Browse' button to select the downloaded firmware file (e.g., AC1200GE_V2_0_1.bin) from your local system.
• After selecting the file, click the 'Upload' button to initiate the firmware update.

Step 2: Downloading the Firmware

The process involves downloading the firmware file from the provided address. This is typically done by opening a web browser and navigating to the specified URL.

The screenshot shows a browser window with the download address entered in the URL bar.

Step 3: Uploading the Firmware

This step involves uploading the downloaded firmware file to the Access Point via the management interface.

The interface shows the 'Upgrade Firmware' section with the 'Local Upgrade' option selected. The 'Firmware Version' is V2.0.1. The 'Select File:' field will show the path to the firmware file after browsing and selecting it. The 'Upload' button is then clicked to start the process.