AtomOS 11.05.00 Firmware Release Notes
Shinobi II
Installation Method
Before installing the update, it is recommended to connect the Shinobi II to the main power using a USB-C power adapter (minimum 20W output) or use a fully charged battery.
It is important that the Shinobi II does not lose power during the firmware upgrade.
- Download the firmware provided by Atomos and unzip the ZIP file.
- Format an SD card with FAT32/NTFS for Mac or Windows PC.
- Copy all .BIN files included in the ZIP file to the root directory of the SD card.
- Insert the SD card containing the update files into the Shinobi II's SD card slot.
- Briefly press the power button to turn on the Shinobi II.
- The Atomos logo will appear, and the firmware update will automatically start after a few seconds.
- When the firmware update is complete, a message will prompt you to restart the Shinobi II.
Note: Before restarting, please allow a few seconds for the Shinobi II to complete the update.
- Press and hold the power button on the Shinobi II to turn it off, then immediately restart it.
- Once the Shinobi II restarts, select the info tab from the main menu. There, confirm that the version number matches the firmware you intended to install.
Shinobi II User Manual
For more details and features of the Shinobi II, please refer to the online User Manual and FAQ. Links are as follows:
Update Content
- Improvements to touch focus function for Panasonic and Canon cameras.
- Improvements to monitoring functions such as frame guides and safe areas.
- Improvements to camera status display for Panasonic and Nikon cameras (compatible with both video and still image modes).
- Improvements to battery display when using a coupler for Sony, Panasonic, and Canon cameras.
