Atomos X-Rite Calibrator Quick Start Guide

CALIBRATING THE DISPLAY

Downloading and using the software

Download the Atomos Calibrator software from the Atomos support site: www.atomos.com/support
Unzip the software and open the installer program.
Click 'Next' on the welcome screen. Tick the checkbox to agree to the terms of the software and press 'Install'. Click 'Finish' once the software is installed.
Ensure the X-Rite device is connected before starting the calibration software.
Open the software from the Application folder or the Desktop Shortcut.
When the X-Rite i1 is detected, press 'Calibrate' to start the process.
The 'Status' will change from 'Idle' to reflect the progress of the calibration.
Once complete, a message box will appear. Press 'OK' and close the installer.
Calibration process is now complete.

DOWNLOAD THE FULL ATOMOS CALIBRATION SOFTWARE

[download] www.atomos.com/support

CHEKLIST

Supported Atomos Devices:

[ ] Ninja V+
[ ] Ninja V
[ ] Ninja Inferno
[ ] Shogun 7
[ ] Shogun Inferno
[ ] Shogun Studio 2
[ ] Shinobi 7
[ ] Shinobi HDMI / SDI
[ ] Neon 17 / 24
[ ] Sumo 19

Required Accessories:

[ ] X-Rite i1 Display Pro or Pro Plus Calibrator unit (Only the full retail version of the i1 Display Pro / plus are supported)
[ ] Atomos USB to Serial LANC cable (ATOMCAB004) (Available separately from your Atomos Local Reseller)

For purchasing information, visit: www.atomos.com/where-to-buy

GETTING STARTED

Setting up the connections

Turn on the Atomos unit and connect the USB to Serial LANC cable into the LANC/REMOTE port. Plug the USB end into a Windows PC or Mac.

Connection Diagram Description:

The diagram shows the rear ports of two Atomos devices, Ninja V and Shogun 7. The Ninja V has ports labeled 'MIC/LINE' and 'REMOTE'. The Shogun 7 has ports labeled 'REMOTE', 'HDMI IN', and 'USB OUT'. The text indicates to locate the remote port (labeled 'REMOTE' or identified by a LANC symbol) on your specific Atomos device. The position of this port may vary across different Atomos models.

A separate diagram illustrates the connection flow: the Atomos device connects via LANC to a computer, and the computer connects via USB. This implies the LANC port on the Atomos device is used for communication, and the USB connection is to the computer.

CONNECTING THE X-RITE I1 DISPLAY PRO:

Plug the USB cable from the i1 into a Windows PC or Mac before starting the calibration software.
Rotate the protective cover of the X-Rite i1 Display Pro to reveal the glass sensor.
Place the X-Rite i1Display Pro on the LCD display of the Atomos device.
Ensure the round foam pad around the i1's sensor sits flat on the LCD to prevent external light from entering the sensor.

NOTE: The X-Rite i1Display Pro must remain stationary while the calibration process is occurring.

Placement Diagram Description:

The diagram shows a top-down view of the X-Rite i1 Display Pro being placed onto the screen of an Atomos monitor. An arrow indicates the placement, and a second diagram shows a computer connected via USB, implying the calibrator is connected to the computer.

For detailed instructions and important up-to-date information regarding calibration, please visit the Atomos support site: www.atomos.com/support

© ATOMOS Global Pty. Ltd. trading as ATOMOS under license. All trademarks are the property of their respective owners. Atomos reserves the right to change or alter any product specifications without notice.

	Atomos Ninja Quick Start Guide Get started with your Atomos Ninja 4K monitor/recorder. This guide covers safety instructions, setup, hardware features, warranty information, and the software license agreement.
	Atomos Ninja V+ Quick Start Guide A concise guide to setting up and using the Atomos Ninja V+ professional video recording monitor, covering its features, connectivity, and safety information.
	Atomos Ninja V+ Quick Start Guide Comprehensive guide to setting up and using the Atomos Ninja V+ professional video monitor and recorder, covering features, connectivity, safety, and warranty information.
	AtomX CAST Quickstart Guide and Warranty Information This document provides safety instructions, warranty conditions, and a software license agreement for the AtomX CAST, a device that transforms the Atomos Ninja V/V+ into a 4-input HDMI video switcher and streamer.
	AtomX CAST: HDMI Switcher & Streaming Dock for Atomos Ninja V/V+ Transform your Atomos Ninja V/V+ into a 4-input HDMI switcher and streaming dock with the AtomX CAST. Learn about setup, features, safety, and warranty.
	Atomos Shinobi 7 Quick Start Guide - Setup and Features Get started with the Atomos Shinobi 7 monitor. This quick start guide covers setup, connectivity, physical features, user interface, and essential monitoring tools for professional video production.
	Atomos Shogun Studio 2 Quick Start Guide This guide provides essential information for setting up and operating the Atomos Shogun Studio 2, a professional dual 4K recorder and monitor. It covers hardware connections, media handling, touchscreen interface, and warranty details.
	Atomos Shinobi II Quick Start Guide This guide provides a quick start for the Atomos Shinobi II, covering setup, power, connections, and safety precautions. Learn about product features, included items, and what you need to get started.

ATOMOS

X-RITE CALIBRATOR

QUICK START GUIDE