Stauer Men's Paragon Chronograph Watch
Instruction Manual
Watch Display
The watch face features a main dial with hour and minute hands, a second hand, and two subdials. Key components are labeled as follows:
- A - Start/Stop Button: Located on the upper right side of the watch case.
- B - Crown: Positioned in the middle of the right side of the watch case.
- C - Reset Button: Located on the lower right side of the watch case.
- D - Date Window: Displays the current date, typically located around the 3 o'clock position.
- E - Chronograph Second Dial: A subdial for tracking chronograph seconds, usually found at the 6 o'clock position.
- F - 24 Hour Military Time Dial: A subdial indicating the time in a 24-hour format, often located at the 9 o'clock position.
Timesetting
Setting the Date
- Pull the crown (part B) out to position "1" and turn the crown counter clockwise to set the desired date.
- Push the crown back to position "0".
NOTE: The date should not be adjusted between 9:00pm to 1:00am, otherwise the day may not change properly.
Setting the Time
- Pull the crown (part B) out to position "2" when the second hand is at the twelve o'clock position. Turn the crown to set the desired time.
- Push the crown back to position "0".
Using the Chronograph
This watch features a 60-second chronograph function.
- To START the Chronograph, press the Start/Stop button (part A).
- To STOP the Chronograph, press the Start/Stop button (part A) again.
- To RESET (set to zero) the Chronograph, press the Split/Reset button (part C). This procedure should be performed when the chronograph second hand does not return to zero position after the chronograph has been reset and after the battery has been replaced.
Features
- Precision movement with chronograph function
- Stainless steel crown and caseback
- Gold-finished alloy case
- Crocodile-embossed leather strap
- Date display window
- 24-hour military time subdial
- 60 second chronograph subdial
- Water resistant to 3 ATM