Watch Display
The watch face features a main dial with a date window and three smaller sub-dials, each capable of displaying a different time. The diagram indicates the following components: A - Crown: The primary control for setting time and date. B - Date Window: Displays the current date. C - Lower Dial Crown: Controls one of the smaller time dials. D - Upper Dial Crown: Controls another of the smaller time dials.
The crown can be operated in three positions: Position "0" (zero): The standard position when the watch is not being set. Position "1": Used for setting the date and the smaller time dials. Position "2": Used for setting the main time dial. Arrows indicate the direction of crown movement for setting time and date.
Timesetting
This watch features three individual time dials and a date window.
To Set the Time - Large Dial
- Pull the crown out to position "2" (diagram part A) to set the watch hands to the proper time by turning the crown forward and backward.
- Once the time is set, push the crown back into the original "0" (zero) position.
To Set the Time - Small Dials
- Pull the crown (part C or D) out to position "1," which will allow you to adjust watch hands for proper time selection on the corresponding dial.
- Turn the crown either clockwise or counterclockwise. Once the time is set, push the crown back into the original "0" (zero) position.
To Set the Date
- Pull the crown out to position "1" (diagram part A) and turn clockwise to set the date (part B).
- Once the date is set, push the crown back into the original "0" (zero) position.
Features
- Precision movement
- 3 individual time dials
- Date window with main dial
- Stainless steel case back
- Ion Plating alloy case
- Genuine leather strap
- Fits wrists 7 1/2" to 9 1/4"
- Water resistant to 3 ATM
Visit Stauer.com to learn more about the fantastic benefits of owning a Stauer Watch! www.stauer.com
Authentic Stauer Historical Reproductions