Minelab X-TERRA ELITE Metal Detector Quick Start Guide

This guide provides essential information to get you started with your Minelab X-TERRA ELITE metal detector.

Quick Start Steps

Follow these four simple steps to begin detecting:

Step 1: Power On
Press the power button [▶️] to turn on the detector.
Step 2: Select Search Mode
Choose the most suitable search mode for your environment from the available options. [⚙️]
Step 3: Cancel Noise
Engage the noise cancel function to filter out unwanted electromagnetic interference. [?]
Step 4: Transition to Detecting
Start sweeping the search coil over the ground to begin your search. [?]

Search Modes Overview

The X-TERRA ELITE features multiple search modes designed for different conditions and targets:

Park Mode: Optimized for finding coins, general jewellery, and small artefacts in park environments.
- Sub-modes include: Coins/Jewellery, Fine Jewellery, Artefacts.
Field Mode: Suitable for detecting coins and artefacts in open fields.
- Sub-modes include: Coins/Artefacts.
Beach Mode: Engineered for use on beaches, handling both wet and dry sand conditions.
- Sub-modes include: Sand (Wet/Dry).
Surf Mode: Designed for operation in saltwater environments, including underwater.

Assembly Instructions

Assemble your Minelab X-TERRA ELITE by following these steps:

Connect the lower shaft section to the mid shaft section.
Attach the control box assembly to the mid shaft.
Secure the search coil to the lower shaft.
Connect the coil cable to the control box.
Adjust the shaft length to your preferred height and lock it securely.
Ensure all locking collars and connections are tightened.

Refer to the full user manual for detailed diagrams and instructions.

Charging the Detector

To charge your X-TERRA ELITE:

Charging Time: A full charge typically takes 5-6 hours.
Charger Requirements: Use a high-quality USB charger with a minimum output of 2A at 5V. Using chargers with lower specifications may cause damage.
Indicator Lights: The detector will indicate charging status. [⚡]
Certification Marks: Ensure your USB charger displays certification marks such as CE, EAC, and Intertek. [✅]

Controls and Display Overview

Familiarize yourself with the detector's interface:

Main Controls:

Power Button [▶️]: Turns the detector on and off.
Flashlight Button [?]: Activates the built-in LED flashlight.
Backlight Button [☀️/?]: Adjusts the screen's backlight for visibility.
Frequency Button [?]: Allows selection of the operating frequency.
Pinpoint Button [?]: Activates pinpoint mode to precisely locate a target.

Display Screen Elements:

Battery Level Indicator [?]: Shows the remaining battery charge.
Charging Status Indicator [⚡]: Displays when the detector is charging.
Sensitivity Adjustment [⬆️⬇️]: Controls how sensitive the detector is to metal objects.
Discrimination Scale: A visual scale indicating the detector's ability to ignore ferrous (iron) targets.
Search Mode Indicators [?]: Icons representing the currently selected search mode (e.g., Park, Field, Beach).
Target ID Number [?]: Displays a numerical value corresponding to the detected target's conductivity.
Depth Gauge [?]: Provides an estimation of the target's depth below the surface.

Settings Menu:

Access the settings menu [⚙️] to configure the following:

Noise Cancel [?]: Automatically selects the best channel to minimize interference.
Ground Balance [⛰️]: Adjusts the detector to ignore ground mineralization. Includes automatic tracking.
Volume Adjustment [?]: Controls the loudness of target audio signals.
Threshold [➖]: Sets a low-level background hum for better detection of faint signals.
Target Tone [?]: Configures the audio tones for different target types.
Accept/Reject [✔️/❌]: Allows you to accept or reject specific target IDs.
Recovery Speed: Determines how quickly the detector processes signals after detecting a target. A faster speed is better for trashy areas. [⚡]
Iron Bias: Adjusts the detector's response to iron targets. [?]
Wireless Audio Pairing [?]: Connects to compatible wireless headphones.

The detector also features Minelab's Multi-IQ technology for simultaneous multi-frequency operation.

	Minelab X-TERRA ELITE Metal Detector: Getting Started Guide Comprehensive getting started guide for the Minelab X-TERRA ELITE metal detector, covering assembly, charging, search modes, controls, and settings. Learn how to use your detector effectively.
	Minelab X-TERRA PRO Metal Detector Quick Start Guide A concise guide to setting up and operating the Minelab X-TERRA PRO metal detector, covering assembly, controls, search modes, and basic operation.
	Minelab X-TERRA PRO Quick Start Guide A concise guide to setting up and using the Minelab X-TERRA PRO metal detector, covering assembly, basic operation, search modes, and control functions.
	Minelab X-TERRA ELITE Metal Detector: Getting Started Guide A concise guide to getting started with the Minelab X-TERRA ELITE metal detector, covering initial setup and charging.
	Minelab X-TERRA ELITE Quick Start Guide Get started quickly with your Minelab X-TERRA ELITE metal detector. This guide covers assembly, charging, and basic operation for immediate use.
	Minelab X-TERRA ELITE Metal Detector Getting Started Guide A concise guide to setting up and operating the Minelab X-TERRA ELITE metal detector, covering quick start procedures, assembly, charging, and an overview of controls and screen indicators.
	Panduan Pengguna Minelab X-TERRA ELITE: Deteksi Logam yang Efektif Panduan lengkap untuk Minelab X-TERRA ELITE, mencakup pengaturan mode pencarian, penyesuaian sensitivitas, diskriminasi, pemecahan masalah, dan tips perawatan untuk detektor logam ini.
	Minelab X-TERRA ELITE Metal Detector Getting Started Guide A concise guide to assembling, charging, and operating the Minelab X-TERRA ELITE metal detector, covering quick start steps and control functions.