Proaim ROM-1 Rotating Offset 4 Way Camera Leveller

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

• Proaim ROM-1 Rotating Offset 4 Way Camera Leveller - Mitchell to Mitchell

All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

ROM-1 Setup

1. Loosen the castle nut.
2. Mount the ROM-1 on the tripod.
3. Attach the castle nut to secure the ROM-1.
4. Loosen all four knobs of ROM-1.
5. Adjust the level to your requirement. This is shown by adjusting the levelling knobs.
6. Rotate the upper portion of ROM-1 by unlocking its knob.
7. The ROM-1 will rotate 360°. This rotation capability is indicated.
8. Unlock the geared locking rotation by flipping it towards the rotating head.
9. The head will rotate 360°. This rotation capability is indicated.
10. Insert fluid head (Not included).
11. Secure the fluid head (Not included) by attaching the castle nut to it.
12. Remove the camera plate (Not included) by unlocking the knob of the fluid head (Not included).
13. Attach the camera plate (Not included) to the camera (Not included).
14. Secure the camera (Not included) using a screwdriver (Not included).
15. Mount the camera setup on the fluid head (Not included).
16. Your final setup is ready. The final assembled setup is shown.

Related Product Highlight

YOUR PROAIM AIRWAVE ULTRA VIBRATION ISOLATOR ARM ALL DRESSED UP AND READY TO GO!

(Shown with optional accessories)

Warranty and Support

Warranty: Proaim offers a one-year warranty for its products from the date of purchase. Within this period, Proaim will repair the product without charge for labor or parts. The warranty does not cover transportation costs, nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subject to inspection and evaluation.

Liability: Proaim is not liable for damage caused by products not supplied by Proaim, or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than Proaim's company.

Contact Us: In case of any kind of dissatisfaction, please contact Proaim immediately for support and care.