Universal Camera Gimbal Tripod Head (P-GH-30)

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

• Proaim Universal Camera Gimbal Tripod Head
• 2 x Mounting Screws (Sizes: 1/4"-20 & 3/8"-16)

All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Gimbal Tripod Head Setup

An illustration of the PROAIM Universal Camera Gimbal Tripod Head, a complex, multi-jointed device designed for smooth camera movements. Also shown are two mounting screws of different sizes.

Step 1: Mount on Tripod

Mount and secure the gimbal head on the tripod.

NOTE: The gimbal head mounts directly to tripods with a 3/8"-16 threaded mount. A conversion adapter for 1/4"-20 mounting is provided, making it universally compatible with tripods.

Visuals demonstrating the attachment of the gimbal head to a tripod mount, highlighting the 3/8"-16 thread and the use of a 1/4"-20 adapter.

Step 2: Secure the Head

After mounting the gimbal head, secure it correctly with the locking knob.

NOTE: The head pans 360° while keeping the horizon straight using the bubble level at the base. A 360° panoramic scale allows for easy pan adjustments.

Images showing the gimbal head being secured by its locking knob, with a close-up on the 360° panoramic scale and bubble level for precise orientation.

Step 3: Adjust Swing Arm

Loosen the locking knob of the gimbal head, then set the swing arm according to the shot's requirement and tighten the knob back.

NOTE: The swing arm tilts horizontally, allowing for extreme tilt angles to achieve multi-dimensional shots.

A sequence illustrating the loosening of the swing arm locking knob, its adjustment to achieve different angles, and subsequent tightening.

Step 4: Adjust Camera Plate Clamp

Slide the camera plate clamp up and down by loosening the locking knob. Set the camera position according to your requirement and tighten the knob back.

NOTE: The clamp is Arca Swiss compatible and moves on a scaled slide way, secured with a control knob.

Steps for adjusting the camera plate clamp, showing the loosening of its knob, sliding the clamp along the guide rail, and re-tightening.

Step 5: Adjust Dovetail Plate

By loosening the adjustment knob, the dovetail plate can move backward/forward.

NOTE: The Gimbal Head features a double dovetail plate with 1/4"-20 and 3/8"-16 mounting screws, secured by the platform adjustment knob.

Demonstration of loosening the adjustment knob to allow the dovetail plate to slide forward or backward.

Step 6: Balance Camera

Before use, ensure the head is vertically and horizontally balanced. The camera must be adjustable at any angle while remaining in position. The adjustment knob allows you to set the camera position as needed.

NOTE: The head easily supports and balances huge and heavy telephoto lenses weighing up to 22.7kg.

Illustrations of a camera being mounted and balanced on the gimbal head, showing vertical and horizontal adjustments. One image focuses on balancing a camera with a large telephoto lens.

Product Overview & Warranty

PROAIM Universal Camera Gimbal Tripod Head (P-GH-30)

The PROAIM Universal Camera Gimbal Tripod Head (P-GH-30) is fully assembled and ready for use.

A photograph of the fully assembled PROAIM P-GH-30 Universal Camera Gimbal Tripod Head, presented with additional, optional accessories.

Warranty Information

PROAIM offers a one-year warranty for its products from the date of purchase. Within this period, repairs will be made without charge for labor or parts. Warranty does not cover transportation costs or damage resulting from misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by PROAIM.

Liability Statement

PROAIM is not liable for damage caused by products not supplied by PROAIM, or from mishandling during transit, accidents, misuse, neglect, lack of care, or service performed by anyone other than PROAIM company personnel.

Customer Support

In case of any dissatisfaction, please contact PROAIM customer support immediately. PROAIM promises utmost support and care until you use the product.