Garden Swing Assembly Instruction

PACKING DETAILS: TOTAL 2 BOXES

BOX 1/2:

BOX 2/2:

Important Information for Garden Swing

IMPORTANT - KEEP THIS INFORMATION FOR YOUR SUBSEQUENT CONSULTATION: READ CAREFULLY

Only for domestic use

Use tips:

• Place the swing stably on a flat floor.
• Mount the swing arm in the shelter of the weather.
• Stay away from open flames.
• Do not hang anything in the structure.
• Avoid overloading the anchors.
• It is advised not to stay on the swing when there is a storm.
• It is recommended to protect the swing in case of strong wind or rain and in your absence.

Precautions before assembly:

• Prepare a clean and dry mounting area.
• Verify that the product is not damaged.
• Check that none of the pieces are missing.

Maintenance:

• Clean with a soft fabric.
• Regularly remove leaves and/or water collected on the canvas.
• Check the anchors regularly.

Storage conditions:

• The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.

Caution with the risks of pinching or cuts during assembly.

The manufacturer declines all responsibility in case of damages due to a bad installation or due to weather.

ASSEMBLY INSTRUCTION

1. Step 01: Assemble the Main Frame Top. Connect the two curved metal tubes (A) to the central straight metal tube (C) using the integrated connection points. Then, attach the two other curved metal tubes (B) to the ends of the assembled structure, forming the upper arch of the swing frame. Ensure all connections are secure.
2. Step 02: Attach Side Supports. Secure the side supports to the main frame. Use bolts (W) and washers (R) to fasten the uprights to the frame connections.
3. Step 03: Assemble the Base Frame. Connect the straight metal tubes (F) and (H) to form the rectangular base of the swing. Use bolts (S), (Q), and washers (V) to secure these connections, ensuring the base is stable and level.
4. Step 04: Prepare and Attach the Seat. Take the seat base with fabric (E). Attach the hanging points (O) and (P) to the seat frame using bolts (Z) and nuts (Z1). These points will be used to hang the seat from the main frame.
5. Step 05: Connect Seat to Frame. Attach the seat frame (D and D1) to the main structure. Use bolts (U), caps (X), washers (W), and bolts (T) to secure the seat to the lower part of the frame, connecting it to part (K) and (D2).
6. Step 06: Attach Hanging Chains. Connect the hanging chains (G) to the seat frame and the upper part of the main swing frame. Use washers (W) and bolts (T) to secure the chains, ensuring the seat hangs freely and securely.
7. Step 07: Install Springs. Attach the springs (L) to the designated points on the seat frame, providing suspension for the swing.
8. Step 08: Attach Canopy Frame. Connect the canopy support bars (I) to the upper part of the main swing frame. Use hooks (Y) to secure these bars, forming the structure for the canopy.
9. Step 09: Assemble Canopy Fabric. Take the canopy fabric parts (M) and (J). Slide the support bars through the designated sleeves or pockets in the fabric to prepare the canopy for attachment.
10. Step 10: Attach Canopy to Frame. Place the assembled canopy onto the canopy support bars (from Step 08). Secure the canopy to the frame, ensuring it is taut and properly positioned to provide shade.
11. Step 11: Final Canopy Adjustment. Make any final adjustments to the canopy, ensuring part (N) is correctly positioned and secured for optimal coverage and stability.
12. Step 12: Assembly Complete. The garden swing assembly is now complete.