Easy as 1-2-3 Assembly Instruction
Numbers must Match for Secure Assembly
Product Identification
Model: FPPTC-12-F
This document provides assembly instructions for the Zinus bed frame.
Components
- A: Headboard (x1 pc)
- B: Side Rail Bracket (x4 pcs)
- C: Side Rail (x1 pc)
- D: Slat Support Bar (x1 pc)
- E: Support Leg Bracket (x2 pcs)
- F: Support Leg (x2 pcs)
- G: Center Support Rail (x1 pc)
- H: Support Bar (x2 pcs)
- I: Support Bar (x1 pc)
- J: Headboard Cushion (x2 pcs)
- K: Slats (x10 pcs)
- L: Bolt (x9 pcs)
- M: Bolt (x18 pcs)
- S: Bolt (x2 pcs)
- USB Cable and Power Adapter (not explicitly labeled with a letter, but shown in diagrams)
Assembly Steps
-
1 Attach side rail brackets (B) to the headboard (A) using bolts (L). Ensure the orientation is correct as shown in the diagram. Repeat for the other side.
-
2 Attach the side rails (C) to the side rail brackets (B) using bolts (M). Ensure a secure fit.
-
3 Connect the support leg brackets (E) to the side rails (C) using bolts (M). Ensure they are firmly attached.
-
4 Attach the support legs (F) to the support leg brackets (E). This may involve screwing them in or using additional hardware not explicitly detailed but implied by the diagram.
-
5 Position the center support rail (G) between the side rails (C). Secure it using the provided hardware, likely bolts (M) or similar, into the pre-drilled holes on the side rails.
-
6 Attach the support bars (H) and (I) to the frame. The diagram shows these connecting the center support rail (G) to the headboard (A) and footboard area. Use appropriate bolts (likely M).
-
7 Place the slats (K) across the support bars (H) and (I). Ensure they are evenly spaced and secured according to the diagram, which shows them resting in designated slots or brackets.
-
8 Connect the USB cable to the port on the headboard and plug the power adapter into a wall outlet. The diagram shows a USB cable extending from the headboard and being inserted into a hole.
-
9 Attach the headboard cushions (J) to the headboard (A). The diagram shows them slotting into place.
-
10 Adjust the tilt of the headboard cushions (J) by selecting one of the four available grooves behind the cushions for optimal support. The diagram shows a curved arrow indicating adjustment.
-
11 To release the tilted headboard, lift it out of its groove and return it to its original position. The diagram shows a curved arrow indicating the release motion.
-
12 Final check of all connections to ensure a secure and stable assembly.
Return Policy
ZINUS believes you will absolutely love your new addition to your home, but if for some reason you want to return the product, please contact Zinus directly before you decide to return your product to the retailer. Zinus Customer Service can answer most concerns and can assist you with any questions you may have about your new product.
Please contact Zinus first by emailing customerservice@zinusinc.com or by submitting a request at https://support.zinus.com.
The item must be returned in good condition, in original box, with all original proof of purchase, parts and accessories, within the time frame specified by the retailer it was purchased from.
Please visit Zinus.com for warranty information on your new product.
