Warning!
The user manual included in this work contains important information related to the safety of installation and use of the device. Only persons who read the user manual may use the device. The user manual must be kept because it may be required in the future. The device is to be used exclusively for purposes specified in this user manual. The device must be unpacked prior to starting-up. After removing the packaging, ensure the device is in working order. If the product has defects, it should not be used until it is repaired. The product is intended for use at home and commercial use and may not be used for other than intended use. The manufacturer is not liable for damages resulting from not adhering to the rules contained in the user manual. Therefore, it is recommended to follow the aforementioned safety rules for operation and maintenance of the device. This will ensure safety and avoid causing damage to the device. The manufacturer and the supplier are not liable for losses or damages arising out of the product, including financial or intangible losses, loss of profits, income, data, pleasure from use of the product or other products related with it - indirect, incidental or consequential loss or damage. The above provisions apply whether the loss or damage concerns:
- Deterioration of quality or the lack of operation of the products or products related to it due to damage as well as the lack of access to the product when it is undergoing repair, which results in stoppage, loss of user's time, or a break in business activity;
- Improper results of operation of the product or products related to it;
- Losses and damages according to any legal category, including negligence and other losses, termination of a contract, expressed or implied guarantee, and strict liability (even if the manufacturer or the supplier was notified about the possibility of occurrence of such damages).
Safety measures:
Particular attention during design was directed to quality standards of the device where ensuring safety of operation is the most important factor. The device must be secured against contact with caustic, staining, and viscous fluids. The device was designed to restart operation when power supply is restored after a break. Attention! It is recommended to use protections to further protect the device from possible overvoltages in installations. Surge protectors are effective protection against accidental pass to the device voltages higher than the rated. Damages caused by voltages higher than specified in the manual are not under warranty. Turn off the device before transporting it. Prior to connecting the device to a power source, check whether the supplied voltage is consistent with the rated voltage specified in the user manual.
Proper product disposal:
A marking of a crossed out waste bin indicates that the product may not be disposed of together with other household waste in the entire EU. To avoid possible damage to the natural environment or health due to uncontrolled waste disposal, it should be handed over for recycling, propagating in this way sustainable use of natural resources. To return a worn-out product, use a collection and disposal system for this type of equipment or contact a seller from whom it was purchased. It will then be recycled in an environmentally-friendly way.
The Wi-Fi / IP video doorphone is dedicated to work with II generation IP Hikvision internal panels. The Video Doorphone is mounted in a surface housing.
Product Appearance
The Hikvision DS-KV6113-WPE1 Wireless Video Doorphone features a sleek, rectangular design with a black and gray finish. The front panel includes a prominent camera lens at the top, below which are small indicator lights and a microphone/speaker grille. A large, circular doorbell button is located at the bottom of the front panel. The device is designed for surface mounting.
Technical Specifications
| Feature | Specification |
|---|---|
| Sensor | 2 Mpx |
| Resolution | 1920 x 1080 |
| Camera view angle | 129° |
| IR illuminator | Yes |
| LED illuminator | No |
| PIR detector | No |
| Doorbell button | 1 pcs |
| Proximity reader built-in | MIFARE 13.56 MHz |
| Wireless transmission range | The range is limited only by the availability of the Wi-Fi network |
| Wi-Fi standard | IEEE 802.11b / IEEE 802.11g / IEEE 802.11n |
| Network interface | Ethernet, Wi-Fi |
| RS-485 interface | Yes |
| Video output | No |
| Video format | H.264 |
| Supported audio formats | G.711 |
| Alarm inputs | 4 pcs |
| Main features |
|
| Power supply | PoE (802.3af), 12 V DC / 830 mA (max) |
| Power consumption | < 10 W (operation) |
| Housing | Plastic |
| Mount | Surface |
| Color | Black + Gray |
| Index of Protection | IP65 |
| Operation temp | -40 °C ... 53 °C |
| Weight | 0.26 kg |
| Dimensions | 65 x 139 x 30 mm |
| Supported languages | Polish, English, French, Spanish, Dutch, German, Portuguese, Russian, Turkish, Italian |
| Manufacturer / Brand | Hikvision |
| SAP Code | 305301760 |
| Guarantee | 3 years |
Rear View
The rear of the DS-KV6113-WPE1 doorphone reveals its mounting plate and connection points. It features a flat back with various screw holes for secure surface installation. Labels and markings indicate compliance certifications and product information. A recessed area at the bottom houses the main connectors.
Connectors
The bottom rear section of the doorphone contains several connection terminals. These include clearly labeled ports for 'ALARM IN' (with multiple pins), 'LOCK' (for door lock control), and 'LAN' (for network connectivity). There are also various pin headers and a multi-pin connector for power and other auxiliary functions, designed for easy wiring during installation.
In the kit:
The product kit includes the DS-KV6113-WPE1 Wireless Video Doorphone unit, a metal mounting bracket, a set of screws and wall plugs for installation, and various wiring harnesses for power and signal connections. A small tool, possibly a screwdriver or hex key, is also provided for assembly.
