Super B TB-DS10 Digital Hanging Scale
Model: TB-DS10
Distributed by: Messingschlager GmbH & Co. KG
Introduction
Thank you for choosing the TB-DS10 digital hanging scale by Super B. This manual provides instructions for safe and effective use.
Product Information
Product Name: Digital Hanging Scale
Model Number: TB-DS10
Manufacturer / Importer: Super B / Messingschlager GmbH & Co. KG
Intended Use: For weighing bicycles and bicycle components.
Battery: Requires 2x AAA, 1.5V batteries (not included). Product is subject to EU Battery Regulation (2023/1542).
Target Audience: For adult use only. Not suitable for children under 14 years.
Usage Note: For indoor use in dry environments only. Not suitable for weighing people or animals. Improper use may result in injury or damage.
Safety Instructions
- Use the scale only with suitable suspension points that can support the maximum weight.
- Maximum load capacity: 50 kg. Do not exceed this limit.
- Check all screws and suspension points before each use.
- Wear sturdy footwear and follow occupational safety regulations.
- Keep children away from the scale.
- Use only new batteries of the same type. Do not mix brands or types.
- Failure to follow these instructions may result in injury or product damage.
Scope of Delivery
- Digital Hanging Scale TB-DS10
- Suspension rope
- Hook
- User manual
Note: Batteries not included.
Product Description
The TB-DS10 is a portable digital hanging scale designed for weighing bicycles, components, or accessories. It features a compact unit with a wire rope, hook, and control panel.
Measuring range: 20 g - 50 kg
Accuracy:
- 20 g - 10 kg: 5 g increments
- 10.01 kg - 50 kg: 10 g increments
Setup
Required tools: Phillips screwdriver, hex key (not included).
- Open the battery compartment and insert 2x AAA batteries correctly, observing the positive [+] and negative [-] terminals.
- Secure the suspension using the supplied rope and hook.
- Align the scale vertically before use.
Operation
Power On:
- Hold the scale vertically and press the "ON/OFF" button.
- Wait for the beep (approximately 2 seconds).
Change Units:
Press the "UNIT" button to switch between kg, lb, or oz.
Tare Function:
Press the "TARE" button to reset the display to zero (e.g., for weighing with an empty bag).
Lock Function:
- Press and hold the "TARE" button for 2 seconds to activate "L_ON" (weight hold) or "L_OFF" (display only shows weight when load is applied).
- To unlock, press the "ON/OFF" button.
Power Off:
- Press and hold the "ON/OFF" button.
- The scale features auto shut-off after 120 seconds of inactivity.
Note: The scale cannot be powered off manually in Lock mode; deactivate the lock function by pressing "TARE" first.
Cleaning and Maintenance
- Clean only with a dry, soft cloth.
- Do not use cleaning agents or liquids.
- Replace batteries when the "LO" indicator is displayed.
- Do not open or attempt to repair the device yourself.
Troubleshooting
Display Indicator | Meaning | Action |
---|---|---|
LO | Low battery | Replace batteries. |
O_Ld | Overload | Remove load immediately. |
No display | Battery empty or incorrectly inserted | Check battery installation. |
For further issues, contact customer service.
Battery Information
Type: AAA, 1.5 V, Alkaline
Replaceable: Yes, by the user.
- Do not throw batteries into fire, short-circuit, or deform them.
- Do not attempt to recharge non-rechargeable batteries.
- Do not mix old and new batteries, or different brands or types.
- Keep batteries out of reach of children.
Storage and Transport
- Store in a dry place at room temperature.
- Protect from shocks and dirt.
- Do not store in damp environments.
Environmental Information and Disposal
- Do not dispose of this product with household waste.
- Dispose of batteries separately at designated collection points.
- Dispose of the device at an electronic waste collection point.
- Observe the symbol of the crossed-out wheeled bin, indicating separate collection for electrical and electronic equipment.
Conformity and CE Marking
This product complies with the following directives:
- GPSR 2023/988/EU
- EU Battery Regulation 2023/1542/EU
- ROHS / REACH / WEEE
- CE compliant
A detailed declaration of conformity is available at: www.messingschlager.com
Technical Support and Contact
Messingschlager GmbH & Co. KG
Hassbergstraße 4, 96148 Baunach, Germany
E-Mail: info@messingschlager.com
Do not use the device if visible damage or malfunction is present.
Warranty and Guarantee
Statutory warranty rights apply. In case of a complaint, please contact customer service in advance. Do not return the product without prior consultation.