The MF5 is Supplied as a Detecting Set Comprising:
Included Items:
- MF5 Detector
- Carry Bag
- Hard Transit Case
- C cell Batteries (NiMH or Alkaline x 4)
- Earset
- Test Piece
- Operations Manual
- Field Guide
Visual Description of Set: The detecting set includes the MF5 detector unit, a durable carry bag, a robust hard transit case for protection, four C cell batteries (NiMH or Alkaline), an earset for audio feedback, a test piece for calibration, and comprehensive operations and field guides.
MF5 Key Features
- Detects metal and conductive targets including fine wires and carbon rods.
- Able to detect targets in all types of soil regardless of mineralised content.
- Selectable Target Alert Responses (Audio, Visual (LED), Vibration).
- Selectable sensitivity.
- Adjustable volume.
- Three sensor modes: Detection Mode, Interrogation Mode, Pinpoint Mode.
- Provides indications of ferrous and non-ferrous targets, carbon rods, and fine wires.
- Able to operate in environments of high electrical interference.
- Provision of a Tactical Mode selectable at start-up or anytime during operations.
- Fully adjustable for operator comfort.
- Simple and intuitive controls.
- Fast and simple three-step setup procedure.
- Open web coil design.
- Waterproof - IP 68 rating.
Visual Description of Detector Control Box: The detector's control box features a power button [Power Button Symbol], a screen displaying information, and several control buttons. It also shows indicator lights [LED Indicator Symbols] and a USB port [USB Port Symbol], suggesting connectivity and status feedback.
MF5 Specifications
General Specifications
| Parameter | Details |
|---|---|
| Volume Control | 1 to 9 |
| Collapsed Size | 400 x 99 x 194 mm (15.7" x 3.9" x 7.6") |
| Extended Size | 1615 x 191 x 237 mm (63.6" x 7.5" x 9.3") |
| Weight, Operational | 2.8 kg (6.2 lb) with rechargeable NiMH C cell batteries |
| Audio Output | Internal Speaker / MF5 Earset / Audio Adaptor Cable |
| Earset | MF5 Earset |
| Waterproof | Waterproof to 3 m / 10 ft (IP 68) |
| Operating Temperature Range | -30°C to +60°C (-22°F to 140°F) |
| Storage Temperature Range | -30°C to +80°C (-22°F to 176°F) |
| Environmental Compliance | MIL-STD-810G |
| EMC Compliance | MIL-STD-461G, CE/RCM/FCC/IC |
| Software Upgradeable | Yes |
| Battery Compatibility | Rechargeable NiMH / Alkaline C cells |
| Battery Life | 10 hours with NiMH batteries |
Detection Specifications
| Parameter | Details |
|---|---|
| Key Technologies | Simultaneous Multi-Frequency Digital Metal Detection |
| Coil | Transmit Coil: Monoloop 269 x 191 mm (10.6" x 7.5") Receive Coil: Figure 8 |
| Operating Frequencies | Four frequencies in the range 5 kHz to 75 kHz |
| Output Power | <-30dBm |
| Sensitivity | 1 to 5 |
| Noise Cancel | Automatic, Operator initiated |
| Ground Balance | Automatic, Operator initiated, Settings retained after switch off |
| Target Identification | Ferrous / Non-Ferrous / Carbon Rods - Fine Wires |
Contact Information
COUNTERMINE
Phone: +61 (8) 8238 0888
Email: countermine@minelab.com.au
Website: www.minelab.com/countermine
As a world leader in metal sensing technology, Minelab strives to continually improve its product range. Minelab reserves the right to introduce changes to the design, technical features and accessories of this product. MF5 and MINELAB® are registered trademarks of Minelab Electronics Pty. Ltd.
Copyright © 2020
