Minelab MF5 Metal and Conductive Target Detector
Product Overview
Product Description
The Minelab MF5 is a Metal and Conductive Target Detector engineered with unique Simultaneous Multi-Frequency Digital technology. This advanced system combines the benefits of Pulse Induction and Continuous Wave technologies to deliver superior detection capabilities. The MF5 is designed for operator comfort and ease of use, featuring a lightweight and compact build. It is particularly suitable for Non-Government Organisations (NGO) and military clearance operations.
Image Description: The detector unit consists of a main control box, a search coil, and a shaft. It is shown in various operational settings, including snowy and desert environments, highlighting its versatility.
Detecting Set Contents
The MF5 is supplied as a comprehensive Detecting Set, including:
- MF5 Detector
- Carry Bag
- Hard Transit Case
- C cell Batteries (4 x NiMH or Alkaline)
- Earset
- Test Piece
- Operations Manual
- Field Guide
Key Features
- Detects metal and conductive targets, including fine wires and carbon rods.
- Able to detect targets in all soil types, irrespective of mineralisation content.
- Provides clear indications of ferrous and non-ferrous targets, carbon rods, and fine wires.
- Operates effectively in environments with high electrical interference.
- Features selectable target alert responses: Audio, Visual (LED), and Vibration.
- Offers selectable sensitivity and adjustable volume control.
- Includes three sensor modes: Detection Mode, Interrogation Mode, and Pinpoint Mode.
- Equipped with a Tactical Mode, selectable at start-up or during operations.
- Designed for fully adjustable operator comfort.
- Features simple and intuitive controls for ease of use.
- Provides a fast and simple three-step setup procedure.
- Utilizes an open web coil design.
- Waterproof rating: IP 68.
Specifications
MF5 General Specifications
| Parameter | Specification |
|---|---|
| Volume Control | 1 to 9 |
| Collapsed Size | 400 x 99 x 194 mm (15.7" x 3.9" x 7.6") |
| Extended Size | 1615 x 191 x 237 mm (63.6" x 7.5" x 9.3") |
| Weight, Operational | 2.8 kg (6.2 lb) with rechargeable NiMH C cell batteries |
| Audio Output | Internal Speaker / MF5 Earset / Audio Adaptor Cable |
| Earset | MF5 Earset |
| Waterproof | Waterproof to 3 m / 10 ft (IP 68) |
| Operating Temperature Range | -30°C to +60°C (-22°F to 140°F) |
| Storage Temperature Range | -30°C to +80°C (-22°F to 176°F) |
| Environmental | MIL-STD-810G |
| EMC | MIL-STD-461G |
| Compliance | CE / RCM / FCC / IC |
| Software Upgradeable | Yes |
| Battery Compatibility | Rechargeable NiMH / Alkaline C cells |
| Battery Life | 10 hours with NiMH batteries |
MF5 Detection Specifications
| Parameter | Specification |
|---|---|
| Key Technologies | Simultaneous Multi-Frequency Digital Metal Detection |
| Coil | Transmit Coil: Monoloop 269 x 191 mm (10.6" x 7.5") Receive Coil: Figure 8 |
| Operating Frequencies | Four frequencies in the range 5 kHz to 75 kHz |
| Output Power | <-30dBm |
| Sensitivity | 1 to 5 |
| Noise Cancel | Automatic, Operator initiated |
| Ground Balance | Automatic, Operator initiated, Settings retained after switch off |
| Target Identification | Ferrous / Non-Ferrous / Carbon Rods - Fine Wires |
