1. Safety Instructions
- Ensure the product is used in a dry and well-ventilated area. If it becomes wet, dry it thoroughly before use.
- For reduced risk of injury, close supervision is required when this product is used near children.
- Do not insert fingers into the product, as this could cause electric shock or other dangers.
- Do not touch the AC interface with metal, as this could cause electric shock, fire, or other dangers.
- During charging or use, do not block the product's vents, as this could cause permanent damage to the product.
- Do not expose the product to rain or snow.
- It is forbidden to use this product in an environment with strong static electricity or magnetic fields.
- Please use the specially designed cable for the product; the company is not responsible for damages caused by third-party equipment.
- Do not disassemble the product at will. If this product requires service or maintenance, please find a qualified repairer.
- Improper use, drops, or excessive force may damage the product.
- When disposing of used batteries, please separate the batteries from different electrochemical systems.
- In case of fire, a dry powder extinguisher can be used, or it can be submerged in water.
- Ensure the product is kept away from fire and heat sources.
2. Specifications
General Information
- Net Weight: Approx. 45 kg (106 lb)
- Dimensions: 540 * 490 * 300 mm (21.25 * 19.29 * 11.81 inches)
- Battery Capacity: 3456 Wh (48 V = 72 Ah)
- Wi-Fi: Supported
- Bluetooth: Supported
- UPS (Uninterruptible Power Supply): Supported
Input Ports
| Port Type | Specifications |
|---|---|
| CA | (100 ~ 120) V ~ 15 A / (220 ~ 240) V ~ 10 A maximum |
| Solar*3 | (12 ~ 60) V 13 A, single port 650 W maximum, three ports 2 000 W maximum |
| AC + Solar | 3 000 W maximum |
Output Ports
| Port Type | Specifications |
|---|---|
| AC | 100-120 V Total Output 3600 W Max (6000 W Max Peak) / 220-240 V Total Output 4000 W Max (6000 W Max Peak) |
| USB-A*2 | 5 V-2.4 A, single port 12 W maximum |
| USB-A*2 | 5 V-3 A, 9 V-2 A, 12 V-1.5 A, single port 18 W maximum |
| USB-C * 2 | 5/9/12/15 V-3 A, 20 V-5 A, single port 100 W Max |
| Car Port | 12 V-10 A, 120 W Max |
Battery Information
- Battery Type: LFP Lithium Fer Phosphate
- Protection Types: High temperature, low temperature, over-discharge, overload, short-circuit, overcurrent protection.
Environmental Operating Temperature
| Parameter | Temperature Range |
|---|---|
| Charging Temperature | 0 °C ~ 40 °C (32 °F ~ 104 °F) |
| Discharging Temperature | -10 °C ~ 40 °C (14 °F ~ 104 °F) |
| Storage Temperature | -20 °C ~ 40 °C (-4 °F ~ 104 °F)* Recommended: 20 ~ 30 °C |
| Operating Humidity Range | 10% to 90% |
Certifications
Various certification logos are displayed, including CE, FCC, RoHS, UKCA, and others.
3. User Guide
3.1 Product Appearance
The portable power station features a robust design with a carrying handle on top and wheels for mobility. The front panel displays an LED screen and various ports: AC Input, USB-C Output (*2), Solar Input (*3), Car Port, AC Output (*4, US 20A Max), RV Port (30A), USB-A Output (*4), and an Extra Battery Connector.
3.2 Touch Display Icon Introduction
The touch display includes several icons:
- Home Icon ?: Touch to enter the home page display interface, view current function status.
- Setting Icon ⚙️: Touch to enter the setting interface for function adjustments.
- Data Icon ?: Tap to enter the data interface, view device model and version.
- Log Icon ?: Touch to enter the log interface, view related faults.
- AC Output Icon: Touch to turn on the AC output function.
- DC Output Icon: Touch to turn on the DC output function.
- Power Icon ⚡: Real-time display of available power; touch to view detailed parameters.
- Extra Battery Active: Indicates when an extra battery is connected and active.
- UPS Active: Indicates when the UPS function is active.
- High Temperature Warning ⚠️: Indicates high temperature.
- Bluetooth Icon ?: Displays when Bluetooth is turned on.
- WIFI Icon ?: Displays when Wi-Fi is turned on.
3.3 AC Charging
This product utilizes AP-POWER fast charging technology, with adjustable charging modes: Fast, Standard, or Mute. The maximum input for Fast mode is 100-120 V/1500 W or 220-240 V/2000 W. Standard mode supports up to 1000 W input. To prevent low voltage issues, charge the power station within 24 hours if the power drops below 5%.
3.4 Solar Charging
Users can charge the product by connecting solar panels in series. Ensure the solar panel specifications match the user manual, particularly that the solar panel output voltage for a single XT60 interface is below 60 V to avoid product damage. The ALLPOWERS Solar Panel can be connected in parallel. The XT60 port supports up to 650W for a single port and 2000W for three ports (12-60V).
3.5 Smart Extra Battery
The R4000 can connect to two or more extra batteries for extended capacity. Use the provided connection cable to ensure compatibility and prevent product damage. The power station's capacity can be expanded as illustrated.
3.6 Smart UPS Function (Uninterruptible Power Supply)
This product supports UPS functionality. Connect the AC mains to the product's AC input port. The connected appliance will use the product's AC output. During a sudden power outage, the product switches to battery power within 15 ms. It is recommended to use a single appliance and avoid overloading. If the power station does not function normally or data is lost due to non-compliance with instructions, ALLPOWERS is not responsible. Note: When AC charging and AC output are active, the UPS function icon illuminates. For UPS operation, the maximum AC output port power should not exceed 1500 W for 100-120 V mains voltage, or 2000 W for 220-240 V mains voltage. Otherwise, the mains and power station will power the devices simultaneously until the power station consumes 5% of its energy and cuts off AC output.
3.7 App User Guide
3.7.1 App Download
Scan the QR codes provided to download and install the application for iOS and Android devices.
3.7.2 Bluetooth Connection
- Confirm that the power station and Bluetooth-enabled phone are turned on.
- Click the [Bluetooth Icon] ? on the mobile app's device peripheral bar to access the Bluetooth connection interface.
- Click 'Next' to scan and search for the power station.
- Select the corresponding power station and click to connect.
- Once connected, 'AP R4000 V3.0' will appear in the Bluetooth device list.
3.7.3 WIFI Connection
- Click on the power station's data and then click the ALLPOWERS name to display the Wi-Fi connection QR code.
- Click the [Wi-Fi Icon] ? on the mobile app's device bar to access the Wi-Fi connection interface.
- Select the portable power station to access the connection page.
- Click 'Scan', then scan the QR code on the device to connect and pair it.
- Upon successful pairing, the power station's name and online status will be displayed.
3.7.4 App Mobile Usage Instructions
The app displays:
- Remaining time until battery depletion.
- Remaining battery capacity (percentage).
- Input power.
- Output power.
The app allows control over:
- AC Switch: Toggle AC output on/off.
- DC Switch: Toggle DC output on/off.
Settings include:
- Work Mode: Adjust charging power mode (Fast, Standard, Mute).
- Energy Saving Mode: Set AC or DC shutdown timers (1, 2, 4, or 6 hours). The power station will automatically shut down after the set time if the output power is below 10W.
- Frequency Switching Options: Switch output frequency between 50Hz and 60Hz when AC is not in use.
3.8 Power Station Parameters
- Display Language: Change the interface language to Chinese, English, or Japanese.
- Output Frequency Setting: Switch output frequency between 50 Hz or 60 Hz when AC is not in use.
- Work Mode Setting: In Normal mode, the station does not shut down automatically after AC/DC is turned on. In Energy Saving mode, if the continuous output power is less than 10 W, it will shut down after the set time (1, 2, 4, or 6 hours).
- Buzzer Sound Setting: Turn the control buzzer sound on or off.
- Bluetooth Settings: Enable or disable the Bluetooth function.
- AC Input Charge Power Modes: Set AC input charging to three types: Silent, Standard, and Fast Charging modes.
- Wi-Fi Settings: Select the Wi-Fi network name and enter the password.
- Screen Brightness Setting: Adjust screen brightness from 1% to 100%.
4. FAQ
- What type of battery does the product use?
This product uses high-quality LFP Lithium Fer Phosphate batteries.
- What equipment can the product's AC output port power?
The AC output port has a rated power of 100 V-120 V 3600 W (6000 W peak) or 220 V-240 V 4000 W (6000 W peak), capable of powering most household appliances. Confirm the power requirements of your appliance and ensure the total load does not exceed the rated power.
- How to know how long the product can supply power?
The product's LCD screen displays the remaining battery life, which can be estimated for devices with stable power consumption.
- How to clean this product?
Wipe the product with a dry, soft, and clean cloth or paper towel.
- How to store the product?
Turn off the product before storing it in a dry, ventilated place at ambient temperature. Avoid placing it near water. For long-term storage, it is recommended to discharge the battery to 30% and recharge it to 60% every three months to prolong its lifespan.
- Can this product be carried on an airplane?
No.
- Can it charge and discharge simultaneously?
Yes, the product supports simultaneous charging and discharging.
- Is the product's actual output capacity consistent with the target capacity indicated in the user manual?
The capacity indicated in the user manual is the nominal battery capacity. Due to efficiency losses during charging and discharging, the actual output capacity may be lower than the specified capacity.
5. Troubleshooting
Note: Press to access the LOG interface to view associated faults.
| Problem | Solution |
|---|---|
| Charging low temperature protection | Automatic recovery after ambient temperature recovery. |
| Charging high temperature protection | Stop charging, check if the product's vents are ventilated. It will automatically recover after the temperature drops. |
| Discharge low temperature protection | Automatic recovery after ambient temperature recovery. |
| Discharge high temperature protection | It is recommended to shut down and let it stand for more than 2 hours. It will automatically recover after the product temperature drops. |
| Total output (AC+DC) discharge overload | Remove part of the load and turn on the AC manually again. |
| AC discharge overcurrent | Remove the load and turn on the AC manually again. |
| AC discharge overload | Remove the load, turn on the AC manually again. Do not use the power station for devices that exceed its rated output power. |
| AC discharge short circuit | Remove the load, repair the load circuit, and turn the AC on manually. |
| PV input overvoltage | Remove the solar panel. Do not use a solar panel that exceeds the rated voltage range to charge the power station. |
| Other faults (e.g., xx xx is the fault number) | Please consult customer service for details. |
6. Package Contents
- ALLPOWERS R4000 Portable Power Station
- AC Charging Cable
- User Manual and Warranty Card
7. Declaration
Before using this product, please read the user manual thoroughly for complete understanding. Improper use may result in serious injury to yourself or others, or damage to the product and property. By using the product, you acknowledge and accept all terms and conditions herein. The user is responsible for their own actions and consequences. ALLPOWERS is not liable for any losses caused by the user's failure to use the product in accordance with the user manual. In accordance with laws and regulations, the company reserves the final right of interpretation for this document and all associated product documents. Updates, revisions, or cancellations may occur without prior notice; please refer to ALLPOWERS for the latest information.
8. Contact Us
For any questions or assistance regarding ALLPOWERS products and services, please email support@allpowers.com. Our official website is www.allpowers.com.
