About the Inspire Filter Adapter
The Interspiro Inspire filter adapter is designed to work with the Inspire face mask, providing filtered air to the user. It has been tested in accordance with EN136 and is intended for use according to local regulations.
Interspiro AB, located at Box 2853, 18728 Täby, Sweden, is the manufacturer of this product.
Safety Information
This manual uses specific terminology to indicate potential hazards:
- DANGER: Signifies a risk of serious injury or death.
- WARNING: Signifies a potential risk of serious injury or death.
- NOTICE: Signifies a potential risk of damage to equipment or property.
Always read and follow the safety instructions carefully.
Important Note: When the Inspire face mask is equipped with the filter adapter, it cannot be connected to an SCBA and is not suitable for firefighting.
Key Sections
This user manual covers the following key areas:
- Before Use: Visual inspection and assembly instructions.
- Donning: Proper procedures for wearing the mask with the adapter.
- After Use: Guidance on removing the adapter and cleaning procedures.
- Maintenance: Information on the 5-year service and replacement of parts.
- Storage and Transport: Recommendations for keeping the product in optimal condition.
For detailed instructions on specific procedures, please refer to the relevant sections within this manual.
