Instruction Manual

7 Day Electronic Timer (TM-618)

SET THE CURRENT DATE AND TIME

Press and hold the [SET] key. Press the [D+] key until the current day is displayed. Repeat using the [H+] and [M+] keys to set the time. Release the [SET] key.

FEATURES

Automatic or manual operation. Push [ON/OFF] to switch the device on or off any time.
Program up to 17 on/off time pairs per day (maximum 119 automatic switch settings).
Minimum setting interval 1 minute.
A setting can be for a particular day of the week, every day, only weekdays, only weekends, or every day but Sunday.
Batteries (rechargeable) are for retaining the current time and program settings during the timer's operating power disconnection.

Please read the instructions before programming your timer.

APPLICATIONS

The timer can open or close electrical apparatus and power automatically according to preset time. Applications include streetlights, neon signs, billboards, and electrical appliances. The timer uses a rechargeable battery (1.2V/40Ma) and a high-accuracy CMOS chip, offering strong anti-jamming capabilities and ease of use.

DISPLAY EXPLAIN AND DIMENSIONS

The display shows the current time (Hour:Minute), day of the week indicators (MO, TU, WE, TH, FR, SA, SU), and program status indicators. It features buttons for setting date/time ([D+], [H+], [M+]), programming ([ON/OFF], [C/R]), and mode selection ([MANUAL]/[AUTO]).

The timer has dimensions of approximately 60mm width, 54mm height, and 32mm depth. The front panel cutout is approximately 54mm width and 21mm height.

SPECIFICATIONS AND WIRING

Temp. range:	-20°C~+50°C	Power:	DC12V, 24V, AC110V, 230V, 50/60Hz
Power loss:	less than 1W	Display:	LCD
Capacity:	16(8)A 250V AC	Timer range:	1min~168hr
Recharge battery:	1.2V 40Ma	Programs:	17 on/off
Average error:	1s/24h, 25°C	Weight:	80g

The wiring diagram illustrates the connection points. The 'Line of fire' connects to the timer's input, and the 'Zero line' connects to the timer's input. The output from the timer is connected to 'The general electric appliance'.

PROGRAMMING THE ON/OFF TIMES

You can program up to 17 groups of on/off times throughout the week.

Press the [ON/OFF] button. "1 ON" will appear on the bottom left corner of the screen. This is the first program you want the device to turn on.
Press the [D+] key to select the day(s) for this program. There are 15 different choices. When the desired day(s) are displayed, press the [H+] key to set the hour and the [M+] key to set the minute.
Press the [ON/OFF] key again. "1 OFF" will be displayed. Follow the instructions in the previous step to set the desired days and times for Program 1 to turn off.
Press the [ON/OFF] key again to set the second program. "2 ON" will appear. Repeat the procedure to set as many of the 17 programs as desired. Not all 17 settings need to be programmed. To delete a programmed setting, press the [C/R] button when that specific day/time ON or OFF setting is displayed. The setting will be deleted, and "--:--" will appear. Press [C/R] again to resume the initial setting.
Press the [ON/OFF] key to advance the display and review each on and off setting. Double-check the dates and times. To make changes, follow the previous steps. When finished, press the [MANUAL] key and the timer will start to execute programs.

Note: During programming, do not delay more than 10 seconds between button presses, or the timer will return to standby mode and display the current set time.

MANUAL OPERATION

The indicators above the [MANUAL] and [AUTO] keys show which mode is operating. Press the [MANUAL] key to select the [MANUAL] or [AUTO] mode.

In MANUAL mode, the device will turn on, and the red ON indicator light will be illuminated if the unit is operating.

In AUTO mode, the timer will begin executing the programs you have previously set.

Selecting MANUAL mode again will turn off the device.

RESET FUNCTION

You can clear the timer memory of the current time and all programmed settings by pressing the [C/R] button. As this is a small button, you may need to use the tip of a paper clip or pen to press the button.

WARNING

The connecting and installation of electrical devices may only be carried out by a qualified electrician.
Press the [RESET] key before first use to clear memory.
For voltage and electrical RATING information, please refer to the markings on the back of the timer.
Do not immerse the timer in water or any other liquid.

	Sinotimer TM-616 Weekly Programmable Timer - Specifications and Operation Detailed information on the Sinotimer TM-616 weekly programmable timer, including specifications, button functions, dimensions, wiring diagrams, and product lineup. Features 7-day programming and 30A switching capacity.
	Sinotimer TM-619 Series Digital Programmable Timer - User Manual Comprehensive guide to programming and installing the Sinotimer TM-619 series digital panel-mount timers, including model details, override functions, and wiring instructions.
	SINOTIMER TM-630A/TM-630S Digital Timer: Features and Specifications Detailed technical specifications and features for the SINOTIMER TM-630A and TM-630S digital programmable timers, including power supply, timing range, dimensions, and wiring.
	SinoTimer TM618N Programmable Timer Switch - 12VDC/230VAC, 7-Day Operation Explore the SinoTimer TM618N, a versatile 7-day programmable timer switch. This datasheet details its functions, usage, technical specifications, and features for controlling electrical devices with precision, available in 12VDC and 230VAC models.
	SINOTIMER TM920 Series 3-in-1 Programmable Timer Switch User Manual Comprehensive user manual for the SINOTIMER TM920 Series 3-in-1 programmable timer switch, featuring 7-day programming, pulse, and countdown functions. Learn how to set date, time, control modes, and holiday settings.
	SINOTIMER TM928 Series HD LCD Digital Timer Switch - User Manual and Specifications Comprehensive guide to the SINOTIMER TM928 series digital timer switches, covering features, specifications, setup, and wiring for models like TM919, TM920, TM928, TM928S, TM928R, and TM929.
	SINOTIMER TM-610 Digital Time Switch for DIN Rail - User Manual and Specifications Detailed specifications, wiring diagrams, and operating instructions for the SINOTIMER TM-610 digital time switch, designed for DIN rail mounting.
	SINOTIMER TM929: Guía del Temporizador Analógico Diario de 24 Horas Explore el temporizador analógico diario SINOTIMER TM929 de 24 horas. Este manual proporciona información detallada sobre sus características, especificaciones técnicas y diagramas de cableado para una fácil instalación y operación.