Arctic Air Tower

READ ENTIRE MANUAL BEFORE USE

Congratulations!

Thanks for buying Arctic Air® Tower – the powerful room cooler that pulls in hot air through its evaporative air-cooling filter and turns it into cool, refreshing air... instantly! Experience the cooling comfort of Arctic Air® Tower.

WHAT'S INCLUDED:

ASSEMBLY

1. Place Arctic Air® Tower down so that the front grill is facing up while the base is being assembled.

   Diagram: Tower unit tilted onto its front.

2. Assemble the two Base halves by inserting the tabs on one half into the slots on the other half.

   Diagram: Two circular base halves with interlocking tabs and slots, showing assembly direction.

3. Align the assembled Base with the Arctic Air® Tower. Pull the Power Cord through the hole in the center of the assembled Base.

   Diagram: Assembled base aligning with the bottom of the tower, with the power cord being threaded through the central opening.

4. Insert Tower Pegs (C) into Base Slots (D) and turn the Base clockwise (towards the LOCK symbol) until it locks in place.

   Diagram: Close-up views of the base and tower connection points, showing pegs (C) fitting into slots (D) and rotational locking mechanism.

5. Pull the excess slack of the Power Cord through the hole. Plug the cord into a wall-outlet.

   Diagram: Power cord plugged into a standard wall outlet.

USAGE:

FILLING THE TANK

Pull out the drawer on the backside of the unit. Using a pitcher or other container, fill until the MAX line. Be sure to fill at least until over the MIN line or the water pump will not function properly.

For Best Results, use cold water and/or ice cubes.

Diagram: Back of the unit with the water drawer extended, showing a pitcher filling the tank up to the MAX line.

FAN SPEED

Arctic Air® Tower has 3 fan speeds – High, Medium, and Low. To set desired speed, press the ?️ button on the top control panel.

Diagram: Top control panel showing fan speed selection buttons.

LIGHT SETTINGS

The light brightness can be adjusted to your liking. Lights default to high brightness. When the ? button is pressed, brightness can be adjusted to half-brightness, or off.

Diagram: Top control panel showing light brightness adjustment buttons.

TIMER

You can set an auto-off timer for 2, 6, 8, or 12 hours. Simply press the ⏰ button until your duration is selected. To cancel, press the ⏰ button until no longer lit.

Diagram: Top control panel showing timer selection buttons.

OSCILLATION

Arctic Air® Tower also has wide-coverage oscillation built-in. Press the ? button once for continuous oscillation, or press again to stop the unit where it is currently.

Diagram: Top control panel showing oscillation control button.

MAINTENANCE:

FILTER

To access the filter, remove the front grill by pressing the tab on the top of the grill and place it aside. Using the finger cut-out on the top of the filter, pull the filter towards you and remove.

We recommend weekly cleaning of your Arctic Air® Tower and Filter to keep in best working condition, and replacing the Filter every 3-6 months.

Diagram: Front grill removal and filter extraction.

Filter Cleaning Options:

• DISHWASHER: Place filter in the top-rack of your dishwasher & run cycle normally. Remove and let air dry.
• HAND WASH: Hand wash gently with warm water & soap. Shake out excess water & let air dry.

IMPORTANT: If you see mold on the filter or notice a musty smell, stop and clean the filter before further use. Soak the filter with equal parts clean water and white vinegar – allow to sit for 45-60 minutes. Rinse with warm water, wring out, and let air dry.

UNIT CLEANING

• To prepare for cleaning, run Arctic Air® Tower until all water has emptied from the water tank, or hold Arctic Air® Tower over a sink and carefully dump out to avoid splashing or spilling.
• If you notice the water tank is dirty, use a small, bendable brush (i.e., toothbrush, bottle brush, etc.) and carefully clean the inside of the tank until clean. Rinse clean with warm water.

WARNINGS:

• Do not carry Arctic Air® Tower when filled with water. Some water may remain in unit even if tank is empty.
• Use only clean water. If needed, use distilled water.
• Please read and follow regular maintenance as recommended in the “Maintenance” section of this guide.
• Arctic Air® Tower works best in non-polluted areas. Large dust/dirt particles may reduce the lifetime of the unit.
• We recommend use only in dry locations. If using in a moist area or environment, take care not to get water on external areas of the product.
• If a leak or spill occurs on the surface of the device, unplug Arctic Air® Tower & let it dry for 24 hours. Then, use as normal.
• Do not place in direct sunlight for extended periods of time.
• Before not using Arctic Air® Tower for extended periods of time, empty the water tank, turn unit on, and set to the highest fan speed for at least 4 hours. This will dry out the filter and inside of your unit.
• Only use the original power adapter and cord supplied in the package.
• Do not touch the power supply or power cord with wet hands.
• Unplug Arctic Air® Tower when cleaning, removing/replacing the filter, or moving the device.
• For best results, place Arctic Air® Tower on a higher surface like a table or countertop.
• Do not place Arctic Air® Tower near a heater or any electrical equipment.
• Do not place the device in passageways or high traffic areas where there is a possibility of tripping or knocking it over.
• Do not allow any foreign objects inside Arctic Air® Tower.
• Do not place items on top of Arctic Air® Tower.
• Do not block the front and back grills of the device.
• Do not turn the device upside down.
• Do not submerge the Arctic Air® Tower under water or other liquids.
• Do not place Arctic Air® Tower near open flames or fire sources.
• People with limited physical, visual, or mental abilities or lacking proper experience and/or knowledge should never use the device without supervision of those responsible for their safety or those capable of assistance in using the device.
• The device can be switched off completely only when disconnected from the power supply.
• The manufacturer does not bear any responsibility for any damage from failure to comply with this product guide.
• A replaceable water filter is designed specifically for this product. If your cartridge has been broken or damaged, you can purchase a replacement.

ONTEL® ASSUMES NO RESPONSIBILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF THE PRODUCT. IN PURCHASING AND USING THIS PRODUCT, YOU ASSUME ALL RESPONSIBILITY FOR CLEANING THE PRODUCT AND MONITORING THE PRODUCT FOR MOLD. ADDITIONALLY, ONTEL® SPECIFICALLY DISCLAIMS ALL EXPRESSED WARRANTIES NOT OTHERWISE SET FORTH HEREIN AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF.

FOR BEST RESULTS:

• PRE-SOAK FILTER: To ACTIVATE COOLING, soak your filter under running cold water.

  Diagram: Filter being soaked under running water.

• PLACE IN FREEZER: For MAXIMUM COOLING, place a wet filter in the freezer until frozen.

  Diagram: Filter placed in a freezer.

• FILL WITH PITCHER: Place on a flat surface & fill tank from a water pitcher. For best results, use cold water and/or ice cubes.

  Diagram: Pitcher filling the unit's water tank.

• FILTER CLEANING: See Product Guide for Care & Cleaning instructions.

DO NOT USE ARCTIC AIR® TOWER WITHOUT FILTER. WATER MAY LEAK OUT ONTO FLOOR.

Please Note: You may notice some condensation forming on the front grill. This is normal.

PRODUCT INFORMATION

Distributed by:

OnTel PRODUCTS CORPORATION

©2021 Ontel Products Corp. Fairfield, NJ 07004. All Rights Reserved.

Made In China. Patent Pending.

Model Number: 18009

AC100~120V

DC 5V, 1.5-2.0A

AAT-IM-03-0421-400

1217.0101

For ordering new filters or customer service:

? Web: www.ArcticAirTowerFAQ.com

? Call: 1-888-611-6750

✉️ Email: ArcticAirTower@rephelpdesk.com