Lepmerk RENG245882 Digital Hose End Timer Instruction Manual
INSTALLING THE BATTERY
2 X AAA ALKALINE BATTERIES ARE RECOMMENDED
Remove the battery cover- keep battery compartment dry- install the 2 X AAA Battery by lining up the connections.
Place the battery inside the compartment and reinstall the battery cover.
NOTE: When battery is first connected, it takes up to 1 minute for the battery indicator to assess the battery strength.
MAINTENANCE
Remove and clean the screen washer on inlet side of the timer every few months.
Remove battery if timer is not used for an extended time.
In freezing conditions, un-install the timer and bring it indoors to prevent damage.
HOW TO INSTALL
Attach the timer inlet to the outdoor faucet/spigot turning clockwise- hand tighten only. From the timer outlet connect a
drip irrigation system or a garden hose.
SETTING-TIME & DAY
SETTING-START TIMES
SETTING-WATERING DURATION
SETTING-WATERING DAV(S)
MANUAL OPERATION
To instantly water push “MANUEL” button Push “MANUEL” button to stop
Documents / Resources
 |
Lepmerk RENG245882 Digital Hose End Timer [pdf] Instruction Manual RENG245882 Digital Hose End Timer, RENG245882, Digital Hose End Timer, Hose End Timer, End Timer, Timer |