LEOTEK SN-NB01 Plus Lighting Controller
Specifications
- Product Name: Leotek Lighting Controller (SN-NB01 Plus)
- Model: SN-NB01 Plus
- Manufacturer: Leotek Networks Inc.
- Revision: 1.0
- Date: March 2, 2024
Product Usage Instructions
Installation
- Mount the street light controller to the NEMA 7 base of the light fixture.
- Confirm whether the connection is complete and assemble, and tighten.
Starting to Use
Once the installation is complete, you can start using the Leotek Lighting Controller by following these steps:
- Power on the street light.
- Ensure the controller is properly connected to the light fixture.
- Refer to the user manual for specific instructions on programming and controlling the lighting.
Notice
- Leotek Networks Inc. reserves the right to change specifications detailed in this document at any time without notice, and assumes no responsibility for any errors within this document
- This document contains proprietary technical information that is the property of Leotek Networks inc. and shall not be disclosed to others in whole or in part, reproduced, copied, or used as the basis for design, manufacturing, or sale of apparatus without the written permission of Leotek Networks Inc.
Revision History
| Revision | Date | By Whom | Remark |
| 1.0 | 2024/03/2 | Leotek team |
|
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
Product History
| Revision | Date | By Whom | Remark |
|
|
|||
|
|
|||
|
|
FCC regulatory notice
SN-NB01 Plus
Size
Installation Notes
- Mount the street light controller to the NEMA 7 base of the light fixture.
- Confirm whether the connection is complete and assemble, and tighten.
- Start Using
Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device should be installed and operated with minimum distance 20 cm between the radiator & your body.
FCC Responsible party info
- Company name: LEOTEK Corporation
- Address: 1955 Lundy Ave, San Jose, CA 95131
- Tel or Email address: Tony.Pan@liteon.com
FAQs
Q: Can I use the Leotek Lighting Controller with any type of street light?
A: The Leotek Lighting Controller (SN-NB01 Plus) is designed towork with street lights that have a NEMA 7 base. Ensure compatibility before installation.
Q: How do I reset the controller if needed?
A: To reset the controller, locate the reset button on the device and press it for 10 seconds. The controller will restart and reset to factory settings.
Documents / Resources
 |
LEOTEK SN-NB01 Plus Lighting Controller [pdf] User Manual SN-NB01PW, SN-NB01P, SN-NB01 Plus Lighting Controller, SN-NB01 Plus, Lighting Controller, Controller |