Lighting Controller Manuals & User Guides

DALCNET D100X25-1248-CBM-LV Casambi Lensvector Constant Current Module User Manual

November 11, 2026

DALCNET D100X25-1248-CBM-LV Casambi Lensvector Constant Current Module TECHNICAL SPECIFICATIONS Type Constant Current Supply Voltage Min: 10,8Vdc … Max: 52.8Vdc Input Current Max 900mA ±10% Channel 1 Output Voltage Vin-0,5% Output Current 1 x max 900mA ±10% Nominal Power4 Current [mA]…

Brand: DALCNET

ITC 2106A Fixed Sequence aRGB Controller Installation Guide

November 11, 2026

ITC 2106A Fixed Sequence aRGB Controller INSTALLATION CONSIDERATIONS The Fixed Sequence aRGB Controller is part of the ITC VersiControl line of aRGB controllers and lighting products (purchased separately) and will work with any aRGB product. Refer to individual product install…

Brand: ITC

KPD DALI-2 Push-to-DALI Module Instructions

November 5, 2026

KPD DALI-2 Push-to-DALI Module Product Introduction Freely configure DALI command types—such as on/off, dimming, color adjustment, and brightness levels—via the NFC Lighting app; Supports various DALI device types, including DT6, Tc, XY coordinates, and RGBWAF; Supports two operating modes: Master…

Brand: KPD

ADVATEK LIGHTING PixLite Mk3 Long Range LED Pixel Controller User Guide

October 19, 2026

PixLite Mk3 Long Range Quick Start Guide Transmitters and Receivers PixLite Mk3 long range systems are built by pairing a transmitter with a receiver type. Each pairing has unique purposes and advantages, particularly in how many pixel runs can be…

Brand: ADVATEK LIGHTING

Synapse TL7-DALI-DC-NG Lighting Controller Installation Guide

October 9, 2026

Synapse TL7-DALI-DC-NG Lighting Controller Installation Guide   TL7-DALI-DC(NG) Lighting Controller Load Rating: 24VDC ±10%   Warnings and Cautions TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE INSTALLING!…

Brand: Synapse

PixLite E16-S Mk3 Long Range LED Controller Instruction Manual

September 18, 2026

PixLite E16-S Mk3 Quick Start Guide Physical Connections In order to connect to the PixLite E16-S Mk3, there must be a working power supply between 5 – 24Vdc connected to the power input, which is the small screw terminal marked…

Brand: PixLite

PixLite T8-S MK3 Long Range LED Controller Instruction Manual

September 18, 2026

PixLite T8-S Mk3 Quick Start Guide Physical Connections In order to connect to the PixLite T8-S Mk3, the IEC Power Input must be connected to a source of mains power (100-240V AC, 50/60Hz). An Ethernet cable should also be connected…

Brand: PixLite

Synapse CSEN1-H All-in-One Wireless Lighting Controller Installation Guide

August 31, 2026

Synapse CSEN1-H All-in-One Wireless Lighting Controller DESCRIPTION The CSEN1 is a low-voltage networked lighting controller with an integrated passive infrared sensor and a photocell. It is powered via the AUX power from the LED driver. The CSEN1 autodetects both 0-10V…

Brand: Synapse

Chromateq CLUB DALI Professional DMX Lighting Controller User Guide

July 1, 2026

Chromateq CLUB DALI Professional DMX Lighting Controller This quick start guide contains important informations on the safe operation of the product. Read and follow the safety advice and instructions given. Retain the quick start guide for future reference. If you…

Brand: CHROMATEQ

Chromateq CLUB SPI Multi Protocol LED and Lighting Controller User Guide

July 1, 2026

Chromateq CLUB SPI Multi Protocol LED and Lighting Controller This quick start guide contains important information on the safe operation of the product. Read and follow the safety advice and instructions given. Retain the quick start guide for future reference.…

Brand: CHROMATEQ