USB-A to HDMl Adapter
Cast small screen to big screen
MODEL: LC06 Plus
USER MANUAL
Product introduction：
Portable USB-A to HDMI adapter. It can connect desktop computers or laptops with USB-A port to monitors, projectors, HDTVs or other devices with HDMI port, and can extend the laptop screen to the monitor.
Product parameters：
- USB-A
- HDMI Out
| Product Name | USB to HDMl Adapter |
| Size | 55×36×15mm |
| Material | ABS+Aluminum alloy |
| Connectors | USB-A, HDMI |
| HDMI Out | 1080P |
| Compatible Systems | Windows10 and above, Mac OS10.15 and above |
Connection diagram：
UDisplay instructions：
Windows
Connect this product for the first time, you need to first enter my computer → double-click to run the program
After entering the application interface, it can be used normally. The connection status displays as connected, and the screen can be displayed.
Opening the extended screen function for the first time requires confirmation according to prompts Install the device as shown in Figure 1 or Figure 2 (Note: During the installation process, the computer may restart, which is a normal phenomenon.)
Macbook Air/Pro
First time connecting to this product, click on the icon and run the program
The first use requires opening the following three permissions
Click the lock button, enter the computer password, and click unlock;
Click on “screen recording” and check UDisplay
Click to “Quit and reopen”
Turn on“Keystroke Receiving” 
Click on “Input Monitoring” and check UDisplay
Click to “Quit and reopen”
Turn on“Accessibility Access” 
Click on “Accessibility” and check UDisplay
Once the settings are completed, the screen can be projected.
Equipment upgrade steps:
Windows
- Enter the “UDisplay” and click on “Device Settings – Device Version”;
- Select the device to be upgraded, click “Wait for Upgrade – Start Upgrade”;
- After the progress bar is completed and the device is restarted, the upgrade will be successful.
Macbook Air/Pro
- Enter the “UDisplay” and click on “Device Settings – Device Version”;
- Select the device to be upgraded, click “Wait for Upgrade – Start Upgrade”;
- After the progress bar is completed and the device is restarted, the upgrade will be successful.
Precautions:
- Mac computers need to manually open the UDisplay application during the first run.
- When there is an exception in the extended mode, please confirm that the Mac is used as a built-in display in the Mac display settings.
- UDisplay only supports 1080P output.
- The supporting system is Windows 10 and above, and Mac OS10.15 and above. Please upgrade your computer to the latest system. (Android and Linux are not supported)
- This product does not record any personal data, please rest assured to use it!
Documents / Resources
 |
Lemorele LC06 Plus USB to HDMI Adapter [pdf] User Manual LC06 Plus USB to HDMI Adapter, LC06, Plus USB to HDMI Adapter, USB to HDMI Adapter, HDMI Adapter, Adapter |