lEDYi Lighting RT2 Touch Wheel RF Remote Controller
Touch Wheel RF Remote Controller
Model No.: RT2/RT7
1 and 4 zone CCT/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix
Features
- Apply to dual color(warm white + cool white) LED controller
- Ultra sensitive color adjustment touch wheel.
- Each remote can match one or more receivers.
- AAAx2 battery powered.
- Operate with LED indicator light.
- Magnet on the back which can be stuck on back holder.
Technical Parameters
| Input and Output | |
| Output signal | RF(2.4GHz) |
| Working voltage | 3VDC(AAAx2) |
| Working current | ＜5mA |
| Standby current | ＜10μA |
| Standby time | 1 year |
| Remote distance | 30m(Barrier-free space) |
| Environment | |
| Operation temperature | Ta: -30 OC ~ +55 OC |
| IP rating | IP20 |
| Safety and EMC | |
| EMC standard (EMC) | ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Safety standard(LVD) | EN 62368-1:2020+A11:2020 |
| Radio Equipment(RED) | ETSI EN 300 328 V2.2.2 |
| Certification | CE,EMC,LVD,RED |
| Weight | |
| Net weight | 48 g |
| Gross weight | 88g |
Mechanical Structures and Installations
To FIx the remote, three options are offered for selection: Option 1: stuck the remote on any metal surfaces directly. Option 2: fix the remote’ back holder on the wall with two screws. Option 3: adhere the remote’ back holder to the wall with paster.
Operation
- When turn on light, the indicator display blue. when turn off light, the indicator display red.
- When touch the color wheel, the indicator will display the same color.
- When press or touch operation is invalid (If the light is off), the indicator display red.
- To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Match Remote Control (two-match ways)
End-user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key (single-zone remote) or zone key (multiple zone remote) of the remote.
The LED indicator fast flash a few times
means match is successful.
Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times
means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single-zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
Key function
RT2 1 zone CCT remote
- Turn on/off light.
- Touch to change color temperature.
- Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
- Get warm white or cold white directly.
- 25%, 50%, 75%, 100%
- brightness.Short press recall the scene, ong press 2s save current state into S1/2/3/4. the LED indicator display green when save OK.
RT7 4 zone CCT remote
- Short press turn on/off all zone light.
- Touch to change current zone color temperature
- Short press select and turn on zone light long press 2s turn off zone light. Short press multiple zone key fastly, will select multiple zone synchronously.
- Adjust brightness for currently selected zone, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
- Get warm white or cold white directly for currently selected zone
- Short press recalls the scene, long press 2s save current state into S1/2/3/4. the LED indicator display green when save OK. 4 zone recall or save synchronously.
Safety information
- Read all instructions carefully before you begin this installation.
- When installing battery, pay attention to the battery’s positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery. - If no response from the receiver, please re-match the remote.
- Gently handle remote, beware of falling.
- For indoor and dry location use only.
Documents / Resources
 |
lEDYi Lighting RT2 Touch Wheel RF Remote Controller [pdf] Instruction Manual RT2, RT7, RT2 Touch Wheel RF Remote Controller, RT2, Touch Wheel RF Remote Controller |
