Manual
PIR sensor switch for profiles 061215
Description
Profile motion switch with PIR sensor intended for aluminum profiles for switching single-color LED strips.
Specification
Input/output: 12-24VDC, max. 8A, 12V = 96W, 24V = 196W, sensor detection up to 2m with a viewing angle of 120°. Lighting time setting approx. 8-80s.
Dimensions and connections
Control function
The possibility of setting a time interval of approx. 8-80s. Changing the time is done with a flat screwdriver and turning the trimmer clockwise or counterclockwise. To place the PIR sensor in the diffuser, it is necessary to drill a 10.5 mm mounting hole.
Notice
Avoid exposure to sunlight, light bulbs or heat sources (such as radiators and heaters) or air conditioners in case of false detection caused by a change in ambient temperature. The switch must be determined by a professional person or company. Do not touch the surface of the PIR sensor. Regularly clean the white cover of the PIR sensor with a wet cloth in case the sensor does not work properly.
LED Solution s.r.o.,
Dr. Milady Horákové 185/66,
Liberec 460 07
www.ledsolution.cz
obchod@ledsolution.cz
Documents / Resources
 |
LED SOLUTION 061215 PIR Sensor Switch For Profiles [pdf] Instruction Manual 061215 PIR Sensor Switch For Profiles, 061215, PIR Sensor Switch For Profiles, Sensor Switch For Profiles, Switch For Profiles, Profiles |