LC-POWER LC-M32QC Curved Gaming Monitor
Product Specifications
- Model: LC-M32QC
- Manufacturer: Silent Power Electronics GmbH
- Address: Formerweg 8, 47877 Willich, Germany
- Website: www.lc-power.com
Product Usage Instructions
Wall Mounting
To mount the LC-M32QC on a wall, use the provided screws for optional wall-mounting accessory. Follow these steps:
- Choose a suitable location on the wall for mounting.
- Attach the wall-mounting accessory securely using the screws.
- Place the LC-M32QC onto the wall-mounting accessory and secure it in place.
Frequently Asked Questions (FAQ)
Q: Can I mount the LC-M32QC on any type of wall?
A: It is recommended to mount the LC-M32QC on solid walls that can support the weight of the monitor.
Q: Are the screws for wall-mounting included in the package?
A: Yes, screws for the optional wall-mounting accessory are included with the LC-M32QC.
Q: Where can I find more information about the product?
A: Visit our website at www.lc-power.com for additional product details and support.
Safety precautions
- Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
- Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause injury or a damage to the device.
- Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
- Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
- The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to determine the supply voltage, please consult the distributor or local power company.
- If the monitor will not be used for a long period, please unplug it from the electrical outlet.
- Please use a reliable earthing socket, do not overload the socket, or it may cause fire or electric shock.
- Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
- Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
- Do not pull or twist the power cable forcedly.
Maintenance
CAUTION: Unplug the power cable from the outlet before cleaning the monitor.
- To clean your screen, slightly moisten a soft, clean cloth with water.
- Please use a special screen-cleaning tissue if possible.
- Do not use benzene, thinner, ammonia, abrasive cleaners or compressed air.
- Inappropriate cleaning solutions may damage the monitor or leave a milky film on the screen or the housing.
- Unplug the monitor if you are not going to use it for a longer time period.
- Do not expose the monitor to dust, liquids or a humid environment.
- In case the monitor gets in touch with any liquid, wipe it down immediately using a dry cloth. In case any liquid gets spilled into the ventilation holes, do not use the monitor anymore. Please contact a professional service technician.
Legal note:
HDMI™
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product introduction
Packing list
- Please check that the package of the monitor contains all parts. If any part is missing, please contact your retailer.
- Note: Additional screws may be used as spare parts.Display/ base parts and screws/DP cable/ screws for optional wall-mounting accessory / power adapter/user manual
Installation
Installation of the base:
- Tilt the stem into the opening on the back of the monitor housing (1) and push it down (2).
- Mount the base to the stem and fix it with two screws (3).
- You have completed the installation.
Deinstallation of the base (e.g. if you want to change to wall-mounting):
- Unscrew the two screws and remove the base (1).
- Push the slider next to the VESA cover of the base upward (2) and tilt the stem upward (3).
Remove the stem from the back side of the monitor (4).
Note: Do not press on the liquid crystal screen with hand your to avoid damage to the screen panel.
Installation a Muro
- Take out the wall mount assembly and lock the wall mount assembly with screws.
- Note: Hang the assembled product on a hard wall. Do not pinch the screen with your hands to avoid damaging the screen.
Note: In order to prevent the monitor from falling when it is used on the wall, please install it properly and securely. Do not place or hang any objects on the wall bracket.
Cable connection
Note: If the power cable or signal cable is damaged, you must replace it immediately.
Use a DisplayPort (preferred) or HDMI cable to connect your monitor to the graphics card output of your computer.
Connect the power adapter to the power connector of your monitor.
You may connect headphones or speakers to your monitor.
AUDIO OUT
Connect audio play back devices such as headphones to the AUDIO OUT interface.
DCIN
Please connect the power adapter plug to the corresponding power port of the monitor, and connect the other end to a properly grounded power outlet.
Display operation
Indicator light
- Steady blue light indicates that the power is on and the monitor works normally.
- Rod blinking light indicators that the monitor is in its energy saving mode until it receives a new signal from the computer.
- If the monitor is fully turned off, the indicator light will also be turned off.
- Please make sure your computer is turned on and operates normally, check if all video cables are fully plugged in and/or connected to the monitor.
Rocker switch /OSD menu
Basic function
Entering the function menu:
Panel protection
When the video signals provided by the computer exceed the frequency range of the display, the horizontal and field synchronizing signals will be shut down to protect the display. Set the output frequency of the computer to a lower value within the range of the monitor.
Monitor adjustment
Basic troubleshooting
| Issue | Troubleshooting |
| No display/the power ndicator LED is off | Check if all cables are connected correctly (power and video signal) and if the monitor has been fully shut down. |
| Blurry image, wrong size | Enter the menu ,image settings” and select,,Auto image adjust”. |
| Dark image | Enter the menu ,Brightness and contrast” to adjust the according values. |
| Overheated monitor | Leave at least 5 cm (better 10 cm) free space for ventilation around the monitor, do not cover the housing of the monitor. |
| Dark or light spots after turning the monitor on | The backlight may be illuminated unevenly due to temperature differences at start-up. It may take up to 20 minutes, then the dark/light spots of the display will be corrected automatically. |
| Blinking, shaking or distorted image | Check your computer’s display setting and correct the resolution and refresh rate. |
| Unknown sound after turning off the monitor | This may happen when the power-related components of the monitor discharge after turning it off. |
Basic parameters
| Product type | Liquid Crystal Display | |
| Product model | LC-M32QC | |
| Screen size | 31,5″/80,01 cm | |
| Aspect ratio | 16:9 | |
| Viewing angle | 178° (H) /178° (V) | |
| Pixel pitch | 0,2724 mm (H) x 0,2724 (V) mm | |
| Contrast ratio | 3500:1 (typ) | |
| Colori | 16,7M | |
| Resolution | 2560×1440 Pixel | |
| Maximum refresh rate | 180 Hz | |
| Power specifications | DC 19,0V = 3,42 A
The standard voltage and current may vary with countries, please refer to the label at the back of the product. |
|
| Product dimensions | Without base | 711,0×422,7x 106,1 mm |
| With base | 711,0 x 525,8 x 251,8 mm | |
| Net Weight | approx. 6,0 kg | |
| Gross Weight | approx. 8,2 kg | |
| Tilting angle | Forward tilting :-5°; backward tilting: 15° | |
| Rotation angle | NA | |
| Height angle | NA | |
| Pivot angle | NA | |
| Environmental conditions | Usage | Temperature: 0°C – +40°C humidity: 20% – 85% altitude:≤5000m |
| Storage | Temperature: -10°C ~ 60°C humidity: 10% ~ 90% | |
Silent Power Electronics GmbH Formerweg 8
47877 Willich
Alemania
www.lc-power.com
Documents / Resources
 |
LC-POWER LC-M32QC Curved Gaming Monitor [pdf] User Manual F2404448, Q3217RVC, 180, LC-M32QC Curved Gaming Monitor, LC-M32QC, Curved Gaming Monitor, Gaming Monitor, Monitor |
