A3 repeater settings
It is suitable for: A3
Diagram
Preparation
● Before configuration, make sure that both A Router and B Router are powered on.
● make sure you know the SSID and password for A router
● Connect your computer to the same network of router A and B.
● move the B router closer to the A router to find the B routing signals better for fast repeater.
● Set both Router A and B should to the same band 2.4G or 5G.
Set up steps
STEP-1: B-Router Wireless Setup
You need to enter the settings page of the router B, then follow the steps illustrated.
In the navigation bar, select Basic Setup->Wireless Setup-> Select 2.4GHz Basic network
Setting Network SSID, channel, Auth, password
Click the Apply button
Repeat the steps 3 through 5 to complete the 5GHz Wi-Fi configuration
STEP-2: B-Router repeater setting
* enter the settings page of the router B, then follow the steps illustrated.
In the navigation bar, select Advanced Setup->Wireless->Wireless Multibridge
For Wireless Multibrige, select 2.4GHz. If you want to use 5GHz for Repeater, choose 5GHz.
In Mode list, select Use Wireless Bridge.
Click the Ap Scan button .
Click AP you need repeater, check SSID
Enter the password for router A (You can check the box next to check the password you entered)
Click the Apply button, Wait for the configuration to finish.
Note: If repeater success,but you need to replace the network for repeater,there will be prompted the following figure,click yes.
STEP-3: B Router position display
Move the Router B to a different location for a best Wi-Fi access.
DOWNLOAD
A3 repeater settings – [Download PDF]
