A950RG Repeater Settings
It is suitable for: A800R, A810R, A3100R, T10, A950RG, A3000RU
Application introduction: Repeater Mode, you can extend the superior Wi-Fi signal by Repeater setting function under the Wireless column to increase the coverage of the wireless signal.
Diagram
Preparation
- Before configuration, make sure that both A Router and B Router are powered on.
- make sure you know the SSID and password for A router
- 2.4G and 5G, you can only choose one for Repeater
- move the B router closer to the A router to find the B routing signals better for fast repeater.
Set up steps
STEP-1 B-Router Wireless Setup
You need to enter the settings page of the router B, then follow the steps illustrated.
① Set 2.4G network -> ② Set 5G network -> ③ Click the Apply button
STEP-2 B-Router Repeater Setup
Enter the Advanced Setup page of the router B, then follow the steps illustrated.
① Click Operation Mode> ② Select Repeater Mode-> ③ Click Next button
④ In next page, you should click Scan 2.4G or Scan 5G
⑤ Choose the A-Router SSID you need to make the Repeater
Note: This article set to A router as an example
⑥ Enter the password for the Repeater router
⑦ Click connect
STEP-3 : B Router Position Display
Move the Router B to a different location for a best Wi-Fi access.
DOWNLOAD
A950RG Repeater Settings – [Download PDF]
