TOA-LOGO

TOA AM-1B Real-Time Steering Array Microphone

TOA-AM-1B-Real-Time-Steering-Array-PRODUCT

Equipped with a built-in sensor to detect and track sound sources, the TOA Real-time Steering Array Microphone captures voices clearly and continuously from either side, above or below. This frees speakers to move back and forth in the vicinity of the podium, turn or tilt their heads to address different sections of the audience, or gesture naturally without concern for the location of the microphone. Placed unobtrusively on top of the podium or pulpit, this innovative voice-tracking microphone completely eliminates the interference and inconvenience of gooseneck or handheld mikes.

Unobstrusive desktop design

Adopts an innovative pad-like form permitting unobtrusive placement flat on the podium.

  • Removal of barrier between speaker and audience
  • Freedom to adopt a comfortable speaking posture
  • Ability to move and gesture naturally

Unprecedented voice-tracking capability

Features a unique ability to detect the speaker’s voice, and to track and capture it clearly and reliably, even if the speaker is moving.

  • Built-in voice detection/tracking sensor
  • Voice capture from up to 3 meters and to tracking range angles up to 180 degrees
  • Level compensation for reduced volume variations
  • Narrow (50-degree) directivity assuring minimal acoustic feedback

TOA-AM-1B-Real-Time-Steering-Array-FEATURED

APPEARANCE

AM-1B Array Microphone

TOA-AM-1B-Real-Time-Steering-Array-FIG-2

AM-1W Array Microphone

TOA-AM-1B-Real-Time-Steering-Array-FIG-3

Control Unit (common)

TOA-AM-1B-Real-Time-Steering-Array-FIG-4

CONNECTION

TOA-AM-1B-Real-Time-Steering-Array-FIG-5

APPLICATION

Houses of Worship

TOA-AM-1B-Real-Time-Steering-Array-FIG-6

Auditorium, seminar/meeting rooms

TOA-AM-1B-Real-Time-Steering-Array-FIG-7

SPECIFICATIONS

  AM-1B AM-1W
Array Microphone Unit    
Power Source 24V DC (supplied from the Control Unit)  
Microphone Unidirectional electret condenser microphone  
Directivity Angle Horizontal 50° (800 Hz – 18 kHz, Array mode), 180° (Cardioid mode)

Vertical: 90°

Frequency Response 150 Hz – 18k Hz  
Maximum Input Sound Pressure 100 dB SPL  
Operation Mute switch  
Indicator Microphone status indicator (output: green, mute: red)  
Microphone Cable Shielded twisted pair cable 10m (32.81 ft) with connector equivalent to TA-3
Maximum Cable Length 70 m (229.66 ft) (use of the AES\EBU cable)  
Finish Body, punched net: Surface-treated steel plate, black, 30% gloss

Side cover: ABS resin black

Body, punched net: Surface-treated steel plate, white(RAL9016 equivalent), 30% gloss

Side cover: ABS resin white (RAL9016 equivalent)

Dimensions 483.9 (W) x 22.1(H) x 64.9 (D) mm (19.05″ x 0.87″ x 2.56″) excluding cable
Weight 1.2 kg (2.65 lbs.)  

Control Unit

Operating Temperature 0 °C to +40 °C (32 °F to 104 °F)
Operating Humidity 90 % RH (no condensation)
Accessory Removable terminal plug (3 pins)
Option AC Adapter : AD-246

Rack mounting bracket : MB-15B-BK (for rack mounting one control unit), MB-15B-J(for rack mounting two control units) Wall mounting bracket: YC-850 (for one control unit)

TOA Corporation

www.toa.jp

Specifications are subject to change without notice. (2205) 833-61-100-02-03

Documents / Resources

TOA AM-1B Real-Time Steering Array Microphone [pdf] User Manual
AM-1B Real-Time Steering Array Microphone, AM-1B, Real-Time Steering Array Microphone, Steering Array Microphone, Array Microphone, Microphone
TOA AM-1B Real Time Steering Array Microphone [pdf] Instruction Manual
AM-1B, AM-1W, AM-1B Real Time Steering Array Microphone, AM-1B, Real Time Steering Array Microphone, Steering Array Microphone, Array Microphone

References

Leave a comment

Your email address will not be published. Required fields are marked *