sauermann AMI 310 Base Multi Function Portable Instrument User Guide
Quick Start Guide
The AMI 310 measures simultaneous parameters including pressure, temperature (Pt100 and thermocouple), humidity, air quality (CO/CO2), air velocity, airflow (vane probes and hotwire), and tachometry.
Operating temperature, protection of the instruments and information about storage and the battery
- Operating temperature: 0 to 50 °C (+32 to +122 °F)
- IP 54
- Storage temperature: -20 to 80 °C (-4 °F to 176 °F)
If the instrument is stored outside the operating temperature (for example in a van, a warehouse,…) please wait for 10 minutes in its operating temperature before starting and using it.
Rechargeable Li-ion battery inside the instrument, 16 h battery-life with a pressure module or 14 h a hotwire probe. The instrument is supplied with a 5 V, 1 A power adapter to load the internal battery. The current loading is indicated by a battery symbol on the top left of the screen. The orange led on the bottom of the instrument is also on until the full loading of the battery (the led turns green).
Directive 2014/53/EU
Hereby, Sagerman Industry SAS declares that the radio equipment type AMI 310 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sauermanngroup.com
1 Device description
- Battery level
- USB connection indicator
- Battery level
- Date and time
- Home screen
- Measurement menu
- Dataset menu
- Configuration menu
- Information menu
- Function keys
- OK button
- Navigation arrows
- ESC button
- On/Off button
2 Connections
3 Set language OK
4 Use of the probes
Connect a probe
Connect the mini-DIN cable on the mini-DIN connection of the probe. Connect the mini-DIN cable with the probe on the instrument. A beep indicates that the operation has been correctly performed.
Special precautions for air velocity probes
Add a wireless probe
5 Start and record datasets
View the recorded datasets
Go to the “Dataset” menu with the arrow keys from the home screen. The different measuring datasets are displayed. They are listed by date. To delete all the datasets: press the function key “Del all”. To delete just one dataset: go to the dataset to delete with the arrow keys and press the function key “Delete”. A confirmation window opens: select YES to confirm the deletion or NO to cancel.
Launch averages The instrument is on. Go to “Measurement” with the arrow keys. Press OK. Press the function key “Functions” then select “Averages” then press OK. “Average” menu is displayed.
5 Hold-Min./Max.
Go to “Measurement” menu with the arrow keys and press OK. Measurements are displayed. Press OK. Measurements are frozen on the screen and the minimum and maximum values are displayed.
6 Perform an autozero
It is possible to perform an autozero with a pressure module. This sub-function allows to manually compensate the potential deviations of the sensitive element over time through a manual adjustment of the zero. For the 500 Pa pressure module with solenoid valve: In the menu “Functions”, go to “Autozero” then press OK. For 2500 Pa, 10000 Pa, 500 mbar and 2000 mbar pressure modules without solenoid valve: Unplug the 2 pressure connections tubes from the pressure module. In the menu “Functions”, go to “Autozero” then press OK.
Download the full manual
Customer service portal
Use our Customer service portal to contact us
http://kimo-en.custhelp.com 
Sauermann Industries – ZA Bernard Moulinet – 24700 – Montpon – France
www.sauermanngroup.com
Documents / Resources
 |
sauermann AMI 310 Base Multi Function Portable Instrument [pdf] User Guide AMI 310, Base Multi Function Portable Instrument |
 |
sauermann AMI 310 BASE Multi-Function Portable Instrument [pdf] User Guide AMI 310 BASE Multi-Function Portable Instrument, AMI 310, BASE Multi-Function Portable Instrument, Multi-Function Portable Instrument, Function Portable Instrument, Portable Instrument, Instrument |
