Nedis ZBSM20WT Zigbee Motion Sensor

Nedis ZBSM20WT Zigbee Motion Sensor

Important Information

For more information see the extended manual online: ned.is/zbsm20wt

About this document 

This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user.
Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Keep the packaging for future reference.

Symbols Used Symbol WARNING!

Signal word used to indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury.

NOTICE

Intended and foreseeable unintended use 

Intended and foreseeable unintended use This product is intended as a PIR motion sensor to control other smart products using Zigbee. This product requires the Nedis Zigbee Gateway WIFIZBxxx to use the product wirelessly. Only use the product as described in this user manual.

Any other use of the product than described in this user manual is regarded as unintended use and may cause injury or damage to the product and void the warranty.

The following is considered as foreseeable unintended use:

  • Failure to comply with the instructions in this user manual.
  • Unauthorised modifications to the product.
  • Use of spare parts or accessories not recommended by the manufacturer.
  • Failure to eliminate defects of the products that increase the safety risks.
  • Use in environmental conditions that deviate from the specified operational conditions.

Safety Instructions

Symbol WARNING! 

Fire hazard: 

  • Do not use the product if a part is damaged or defective. Always replace a damaged or defective product immediately.

Electrical hazard: 

  • Do not open the product, there are no user serviceable parts inside.
  • Do not expose the product to water ormoisture

Choking hazard: 

  • Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
  • Do not let children unattended when the product is in use to ensure that they do not play with the product. Always supervise children when the product is in use.

NOTICE

Risk of damaging the product: 

  • Do not make any adjustments to the product. Adjustments may affect safety, warranty and proper operation.
  • Do not drop the product and avoid bumping. Excessive vibrations can lead to loosened connections and may affect proper operation.
  • Store the product in a dry place away from sunlight and protect the product against excessive dust and dirt.
  • Make sure that the battery polarity (+/-) matches the polarity markings inside the battery compartment.
  • Only use the battery type(s) recommended in this document.
  • Do not remove a cell or battery from the original packaging until required for use. Risk of damaging the environment:
  • Properly dispose empty cells or batteries

Pairing With Zigbee Gateway

Declaration of Conformity 

product ZBSM20WT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

Customer Support

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/ZBSM20WT#support

Scan the QR code for more information about your Nedis product or go to: ned.is/zbsm20wt
QR CodeNedis B.V.
De Tweeling 28
5215 MC ’s-Hertogenbosch
The Netherlands www.nedis.com

Logo

Documents / Resources

Nedis ZBSM20WT Zigbee Motion Sensor [pdf] Instructions
ZBSM20WT Zigbee Motion Sensor, ZBSM20WT, Zigbee Motion Sensor, Motion Sensor, Sensor

References

Leave a comment

Your email address will not be published. Required fields are marked *