Zigbee Motion Sensor
SM301Z
Description
The Passive Infrared Motion sensor uses infrared sensors to detect human movements within the sensors range and sends an alert to your phone when motion is detected.
The motion sensor works in both light and darkness, but it is not petted immune. The SM301Z sensor can be used on its own or in a combination with other compatible Zigbee devices. This makes it possible to create different automation scenarios in the Smart Life app and utilize available smart home functionalities.
Recommended placement is 2-3m above the ground. The detection range is 5m with a front angle of 170. The sensor is for indoor use only.
Prerequisite
SM310 Zigbee Gateway or any other compatible Zigbee hub
Setup
SM310 Zigbee Gateway
- Ensure your mobile phone is connected to your home WIFI network and the sensor is as close to the Zigbee Smart Gateway as possible
- Open the Smart Life app and tap the Smart Zigbee Gateway icon, now tap + Add subdevice button
- Using the reset pin, press and hold the reset button at the back of the sensor for 5 seconds until the pairing indicator starts flashing red on the sensor, now tap the LED already blink button in the app
- The sensor should shortly be paired with the Gateway
What is included
SM301Z Motion sensor
Battery AAA x 3
Adhesives
Reset pin
Manual
Note: For any queries regarding using the Smart Life application use the Feedback option
Specification
| Product | Motion Sensor |
| Model | SM301Z |
| Battery specifications | 3 x AAA 1.5V |
| Operating temperature | 0℃~+60℃ |
| Operating humidity | 10%-60%RH (no condensation) |
| Wireless type | Zigbee 3.0 |
| Battery life | up to 3 years (≤10 triggers per day) |
Documents / Resources
 | SAMOTECH SM301Z Zigbee Motion Sensor [pdf] User Guide SM301Z Zigbee Motion Sensor, SM301Z, Zigbee Motion Sensor |
