n-com SPCOM00000069 Adapter
INSTRUCTIONS FOR REPLACING THE SPCOM00000069
- Select the specific adapter for your helmet (the compatible helmet model is shown on the back of the support).
- Apply the double-sided adhesive tape supplied as standard equipment to the selected plastic adaptor (Fig. 1).
- Insert the FLEX cable of the ESS system in the hole of the selected adapter as illustrated, in the direction shown in the image (Fig. 2).
- Rotate the adapter until it is in a horizontal position like the ESS system, then press the two components together until they stick one onto the other (Fig. 3).
For more details, see the product manual instructions.
Documents / Resources
 |
n-com SPCOM00000069 Adapter [pdf] Instructions SPCOM00000069 Adapter, SPCOM00000069, Adapter |
