AOC RS6 4K Decoding Mini Projector
Attention
- The projector is not dustproof or waterproof.
- In order to reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
- Please use the original power adapter. The projector should work under the specified rated power supply.
- When the projector is working, please do not look directly into the lens; the strong light will flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
- Do not cover the vents of the projector. Heating will reduce the life of the projector and cause danger.
- Regularly clean the projector vents, or dust may cause a cooling malfunction.
- Do not use the projector in a greasy, damp, dusty, or smoky environment. Oil or chemicals will cause a malfunction.
- Please handle with care during daily use.
- Please cut off the power if the projector is out of use for a long time.
- Non-professionals are forbidden to disassemble the projector for testing and maintenance.
Warning:
- Operation of this equipment in a domestic environment may cause radio interference.
Note:
- Due to different models and versions, there are certain differences in appearance and functions. Please refer to the actual product.
Packaging Content
After opening the box, please first check if the contents of the packaging are complete. If there are any missing items, please contact the dealer for replacement.
Installation Diagram
The following safety instructions ensure that this function maintains a long service life and prevents fire or electric shock. Please read them carefully and pay attention to all the following warnings.
- Do not install in places with poor ventilation
- Do not install in places that are hot and humid
- Do not plug the vent (Intake and exhaust)
- Do not install in a smoky and dusty environment
- Do not install somewhere directly blown by the warm/cold wind of the NC, or it may cause the breakdown because of the water vapor condensation
Pay attention to heat dissipation
In order to maintain the performance and reliability of the projector, please leave a space of at least 30 cm between the projector and surrounding objects. 
Pay attention to the eyes
The brightness of the projector is very high, please do not look directly or avoid irradiating people’s eyes with the projector to avoid damage to eyesight.
Start Using
In order to achieve a better viewing effect, we recommend that you choose the following installation methods to install the projector.
Horizontally
Easy to install and easy to adjust
Focus Adjustment
When the image is blurry, it is recommended to use the F+/F – keys to fine-tune the lens focal length to achieve the best clarity effect. 
Parts Info
External Equipment
Remote Control
Voice version: Bluetooth voice remote control (only equipped with voice version)
For first-time use, please pair according to this method:
Projection
Indicator light status at the switch on/off position: 
Appendix: Comparison table of projection distance and screen size
Screen size identification (inches) 
Unit:m
Design tolerance +/-8%
This table uses the front end of the lens and the center of the lens as the measuring points, and assumes that the projector is placed horizontally (the front and rear adjusters are fully drawn out).
Safety instructions
- Please pay attention to important information related to the operation and maintenance of the projector. You should read this information carefully to avoid problems. Following safety instructions will increase the life of the projector.
- Please consult the qualified personnel for installation and repair services, and do not use damaged wires, accessories and other peripherals.
- Projector should be kept away from flammable, explosive, strong electromagnetic interference (large radar stations, power stations, substations, etc. Strong ambient light (avoid direct sunlight), etc.
- Do not cover projector vents.
- Please use the original power adapter.
- Keep adequate ventilation and make sure vents are not covered to avoid the projector overheating
- When the projector is in use, please avoid looking directly into the lens; the strong light can cause temporary eye discomfort.
- Do not bend or drag the power cord.
- Do not put the power cord under the projector or any heavy objects.
- Do not cover other soft materials on the power cord.
- Do not heat the power cord.
- Avoid touching the power adaptor with wet hands.
Disclaim
- This manual provides general instructions. The pictures and functions in this manual should be subject to the actual product.
- Our company is devoted to improving product performance, we reserve the right to modify product functions and interface described in this manual without notice.
- Please keep your device properly. We are not responsible for any loss caused by the wrong operation of software/hardware or by repairing, or for any other reason.
- We are not responsible for any loss or any third-party claims.
- This manual has been carefully checked by a professional
FCC STATEMENT
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
FAQ
- Q: What should I do if the device is causing interference?
- A: If the device is causing interference, try repositioning it to reduce interference with other devices. Ensure proper setup according to the user manual.
- Q: Can I modify the device for better performance?
- A: No, modifications that are not approved may void your authority to operate the device. Contact customer support for any performance-related concerns.
Documents / Resources
 |
AOC RS6 4K Decoding Mini Projector [pdf] Instruction Manual RS6, RS6 4K Decoding Mini Projector, 4K Decoding Mini Projector, Decoding Mini Projector, Mini Projector, Projector |