AOC RS6 Projector Product Manual
Model: RS6
Manufacturer: Jiangxi Xingchi Electronic Technology Co., Ltd.
01. Attention
- The projector is not dustproof or waterproof.
- To reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
- Please use the original power adapter. The projector should operate under the specified rated power supply.
- When the projector is working, please do not look directly into the lens, as the strong light can cause temporary eye discomfort. Children should use the projector under adult supervision.
- Do not cover the projector's vents. Doing so can reduce its lifespan and pose a safety risk due to overheating.
- Regularly clean projector vents, as dust accumulation may lead to cooling malfunctions.
- Do not use the projector in greasy, damp, dusty, or smoky environments. Oil or chemicals can cause malfunctions.
- Please handle the projector with care during daily use.
- Please disconnect the power if the projector is not in use for an extended period.
- Non-professionals are forbidden to disassemble the projector for testing and maintenance.
02. Packaging Content
After opening the box, please first check if the contents of the packaging are complete. If there are any missing items, please contact the dealer for replacement.
A compact rectangular projector device.
A handheld remote control with various buttons.
A power cord for connecting the projector to an electrical outlet.
A document icon representing the product manual.
03. Installation Diagram
The following safety instructions ensure that this function maintains a long service life and prevents fire or electric shock. Please read them carefully and pay attention to all the following warnings.
[X] Do not install in places with poor ventilation.
[X] Do not install in places that are hot and humid.
[X] Do not cover the vents (Intake and exhaust).
[X] Do not install in smoky and dusty environments.
[X] Do not install directly in the path of warm/cold air from an A/C unit, as it may cause breakdown due to water vapor condensation.
04. Pay Attention to Heat Dissipation and Eyes
In order to maintain the performance and reliability of the projector, please leave a space of at least 30 cm between the projector and surrounding objects.
Diagram illustrating 30 cm clearance around the projector.
The brightness of the projector is very high. Please do not look directly into the lens or avoid irradiating people's eyes with the projector to prevent damage to eyesight.
[X] Do not look directly into the projector lens or irradiate others' eyes.
05. Start Using
In order to achieve a better viewing effect, we recommend that you choose the following installation methods to install the projector.
Diagram showing the projector placed horizontally on a surface.
Horizontally: Easy to install and easy to adjust.
06. Focus Adjustment
When the image is blurry, it is recommended to use the F+/F- keys to fine-tune the lens focal length to achieve the best clarity effect.
Diagram of a remote control with a finger pointing to the focus adjustment buttons (F+ and F-).
A blurred rectangular image.
A clear rectangular image with text ABCD.
07. Parts Info
Front view of the projector, showing remote receiver window 1.
Back view of the projector, showing remote receiver window 2.
Back view of the projector, showing USB port, Audio out, remote receiver window 2, and loudspeaker.
Side view of the projector, showing the power supply connection.
08. External Equipment
Diagram showing the projector with numbered connection points (1 and 2) on the back.
Diagram showing connection options: 1. USB connection, 2. Power adapter connection.
09. Remote Control
※ Voice version: Bluetooth voice remote control (only equipped with voice version)
Diagram of the remote control with labels for buttons: Power button, Directions (Up, Down, Left, Right), Voice key, Return key, Volume - , Menu key, Manual focusing - , Input signal source, Confirm, Home key, Volume + , Mute button, Manual focusing +.
For first-time use, please pair according to this method:
Automatic pairing:
- Press the voice button on the remote control to enter the pairing page.
- Simultaneously press and hold the left and right buttons ◄ ► on the remote control.
- Release when the remote control indicator light flashes.
- Wait for automatic pairing to succeed before exiting the pairing page.
Manual pairing:
- Press the voice button on the remote control to enter the pairing page.
- Press the OK key again to enter the Bluetooth settings on the settings page.
- Simultaneously press and hold the left and right buttons ◄ ► on the remote control.
- Release the remote control indicator light after it flashes.
- Find the "voice assistant" and click on the connection.
10. Projection
On/Off
Diagram showing the projector in an 'on' state.
Indicator light status at the switch on/off position:
| Status | Indicator Light |
|---|---|
| Standby | Red light |
| Power on | Blue light |
11. Appendix: Comparison Table of Projection Distance and Screen Size
Screen size identification (inches)
Unit: m
Diagram illustrating screen size identification with diagonal measurements.
| Screen Size (inches) | Screen size length x height (m) | Projection distance (m) |
|---|---|---|
| 43 inches | (L) 0.96 m x (H) 0.54 m | 1.4 m |
| 65 inches | (L) 1.44 m x (H) 0.81 m | 2 m |
| 120 inches | (L) 2.67 m x (H) 1.51 m | 3.8 m |
Design tolerance: +/-8%
This table uses the front end of the lens and the center of the lens as the measuring points, and assumes that the projector is placed horizontally (the front and rear adjusters are fully drawn out).
Diagram showing Length and Height measurements relative to the screen size diagonal.
12. Safety Instructions
Please pay attention to important information related to the operation and maintenance of the projector. You should read this information carefully to avoid problems. Following these safety instructions will increase the life of the projector.
- Please consult qualified personnel for installation and repair services, and do not use damaged wires, accessories, or other peripherals.
- The projector should be kept away from flammable, explosive, strong electromagnetic interference sources (e.g., large radar stations, power stations, substations), and strong ambient light (avoid direct sunlight).
- Do not cover projector vents.
- Please use the original power adapter.
- Ensure adequate ventilation and make sure vents are not covered to avoid projector overheating.
- When the projector is working, please do not look directly into the lens; the strong light can cause temporary eye discomfort.
- Do not bend or drag the power cord.
- Do not place the power cord under the projector or any heavy objects.
- Do not cover the power cord with other soft materials.
- Do not heat the power cord.
- Avoid touching the power adapter with wet hands.
Disclaimer
This manual provides general instructions. The pictures and functions described in this manual are subject to the actual product. Our company is dedicated to improving product performance and reserves the right to modify product functions and interfaces described in this manual without prior notice.
Please keep your device properly. We are not responsible for any loss caused by incorrect operation of software/hardware, improper repairing, or any other reasons. We are not responsible for any loss claimed by any third party.
This manual has been carefully checked by professionals.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Attention
Please do not look directly into the lens when projecting to prevent the strong light from causing harm to your eyes. Children should use the projector under the supervision of adults.
