WAN 1 Interfaces: Insert a suitable SFP module
into the SFP port. Connect the cable as per the module’s
documentation. Alternatively, connect the WAN 1 TP interface to a
WAN modem using the provided Ethernet cable.
WAN 2 Interface: Connect the WAN 2 interface
to a WAN modem using the provided Ethernet cable.

Ethernet Interface: Use the cable with
kiwi-colored connectors to connect one of the ETH interfaces to
your PC or LAN switch.
Configuration Interface: Use the included
serial configuration cable to connect to the device for
configuration/monitoring.

USB Interface: Connect a USB printer or
storage device to the USB interface.
Power Connector: Supply power using the IEC
power cable and connect to earth before powering on.

Setting Up the Device

Follow these guidelines for setting up the LANCOM 1930EF:

Attach adhesive rubber footpads if placing on a desktop.

Avoid stacking objects on top of the device and keep
ventilation slots clear.
If mounting in a server cabinet, use provided screws and
brackets, paying attention to R and L marks for accurate
mounting.

LED Description & Technical Details

The POWER/VPN LED indicates device status with green and red
colors. Refer to the manual for specific indications.

Frequently Asked Questions (FAQ)

Q: Can I use third-party accessories with LANCOM 1930EF?

A: No, support for third-party accessories is not provided. It
is recommended to use original accessories for optimal
performance.

View Fullscreen

0524

owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their

Mounting & connecting

Hardware Quick Reference
LANCOM 1930EF

WAN 1 interfaces (SFP / TP combo port) Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-LX) into the

SFP port. Choose a cable compatible with the SFP module and connect

it as described in the module’s documentation. SFP module and cable are

not included.

If desired, alternatively connect the WAN 1 TP interface to a WAN modem

using the provided Ethernet cable with green connectors.

WAN 2 interface (TP) Connect the WAN 2 interface to a WAN modem using the provided

Ethernet cable with green connectors.

Ethernet interface Use the cable with the kiwi-colored connectors to connect one of the

interfaces ETH 1 to ETH 4 to your PC or a LAN switch.

Configuration interface Use the included serial configuration cable to connect the serial

interface (COM) to the serial interface of the device you want to use

for configuring / monitoring.

USB interface You can use the USB interface to connect a USB printer or a USB

storage device.

Power connector and grounding point (device back side) Supply power to the device via the power connector. Please use the

IEC power cable supplied (separately available for WW devices).

ATTENTION: High touch current possible! Connect to earth before connecting the power supply.

Warning! High touch current. Connect to earth before connecting the power supply.

and/or omissions.

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
The power plug of the device must be freely accessible.
Please note that support for third-party accessories is not provided.

Please observe the following when setting up the device
For devices to be operated on the desktop, please attach the adhesive rubber footpads Do not rest any objects on top of the device and do not stack multiple devices

Keep all ventilation slots of the device clear of obstruction

Mount the device into a 19″ unit in a server cabinet using the provided screws and mounting brackets. Pay

attention to the “R” and “L” marks on the brackets for accurate mounting.

0524

owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their

LED description & technical details
Hardware Quick Reference
LANCOM 1930EF

POWER / VPN

POWER Off Green, permanently*
Green / red, blinking
Red, blinking 1x green inverse blinking* 2x green inverse blinking* 3x green inverse blinking* VPN Off Green, permanently Green, flashing

Device switched off
Device operational, resp. device paired / claimed and LANCOM Management Cloud (LMC) accessible
No password set. Without a password the configuration data in the device is unprotected.
Charge or time limit reached
Connection to the LMC active, pairing OK, device not claimed
Pairing error, resp. LMC activation code not available
LMC not accessible, resp. communication error
VPN connection inactive
VPN connection active
VPN connecting

RESET Reset button
WAN 1 / WAN 2 Green, orange off Green, permanently
Green, flickering Orange off Orange, permanently
ETH 1 – ETH 4 Green, orange off Green, permanently
Green, flickering Orange off Orange, permanently

short press > Restart the device long press > Reset the device
No networking device connected Connection to network device operational, no data traffic Data transmission 1000 Mbps 10 / 100 Mbps
No networking device connected Connection to network device operational, no data traffic Data transmission 1000 Mbps 10 / 100 Mbps

Hardware Power supply Power consumption Environment Housing
Number of fans
Interfaces WAN 1 / WAN 2 ETH 1 – ETH 4 Config (COM) / V.24 USB
Package content Cables
Mounting brackets

Internal power supply unit (100240 V, 50-60 Hz) Max. 18 W Temperature range 040 °C, humidity 095 %; non-condensing Robust metal housing, 1 HU with mounting brackets for 19″ installation, 345 x 44 x 253 mm (W x H x D) None; fanless design, no rotating parts, high MTBF
Detailed interface specifications can be found in the device data sheet after entering the device name at www.lancom-systems.com/downloads.
1 Ethernet cable, 3 m (kiwi colored connectors); 1 IEC power cord 230 V (not for WW devices) Two 19″ brackets for rack mounting

and/or omissions.

*) The additional power LED statuses are displayed in 5-seconds rotation if the device is configured to be managed by the LANCOM Management Cloud.

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

Documents / Resources

LANCOM SYSTEMS 1930EF Gigabit Ethernet Black Wired Router [pdf] User Guide
1930EF, 1930EF Gigabit Ethernet Black Wired Router, Gigabit Ethernet Black Wired Router, Ethernet Black Wired Router, Wired Router, Router

References

User Manual

1930EF Gigabit Ethernet Black Wired Router

LANCOM 1930EF Product Information

Specifications

Product Usage Instructions

Mounting & Connecting