Nedis ACAM61BK Action Camera User Manual

Product	Action camera
Article number	ACAM61BK
Dimensions (l x w x h)	60 x 31 x 41 mm
Battery Capacity	900 mAh
Memory	MicroSD card (16 – 128) (not included)
Camera lens	Viewing angle = 170 degrees
Image format	.jpg
Image resolution	8 MP – 16 MP
Video format	.mp4
Video resolution	4K, 60 fps / 4K, 30 fps/ 2.7K, 30 fps / 1080FHD, 120 fps / 1080FHD, 60 fps / 1080FHD, 30 fps / 720p, 240 fps / 720p, 120 fps / 720p, 30 fps
Time lapse	Up to 30 seconds
Display	2.0 LTPS
Current	Standby: 410 mAh Working: 610 mAh
Charging time	3 hours
Frequency bandwidth	2.4 GHz
Maximum Transmission power	14 dBm

Approximate recording time

The approximate recording time is an indication of how much video length can be saved on the microSD card, depending on the video quality.

The maximum video length cannot be recorded on a single battery charge.

MicroSD card	720p, 120 fps	1080p, 30 fps	4K, 30 fps
16 GB	95 minutes	140 minutes	90 minutes
32 GB	180 minutes	270 minutes	170 minutes
64 GB	340 minutes	520 minutes	320 minutes
128 GB	640 minutes	1000 minutes	600 minutes

Safety instructions

WARNING

Only use the product as described in this manual.

Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
Do not drop the product and avoid bumping.

This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the electrical outlet and other equipment if problems occur.

Do not expose the product to water or moisture.

Parts list

1. OK button

2. Power indicator LED

3. Power button

4. Camera lens

5. UP button

6. DOWN button

7. Speaker

8. Display

9. Charging indicator LED

10. Status indicator LED

11. Battery cover

12. Microphone

13. Micro USB port

14. MicroSD card slot

15. HDMI port

Additional parts (not shown in illustration)

16. Battery

17. Waterproof housing

18. Mounting accessories (x10)

19. Bandages

20. Micro USB cable

21. 3M mats

22. Tethers

23. Lens cloth

Installation

Check the contents of the package

Check that all parts from the parts list are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Insert or change memory card

A microSD card (not included) is required to take pictures or videos. Insert the microSD card into the microSD card slot t.

Use a microSD card with a maximum of 128 GB storage capacity.
Format the microSD card before use.

Battery

Charge the camera from any USB outlet with the supplied micro USB cable. The camera can be charged while recording video. Fully charging the battery takes about 3 hours.

Turn on camera

Hold the power button 3 for about 3 seconds until the status indicator LED q lights up blue. A welcome screen appears, and the camera enters video mode.

Hold the power button 3 for about 3 seconds to turn off the camera. A goodbye screen appears, and the display turns off.

Switching between modes

		Picture mode
		Video mode

Switch between modes by pressing the power button 3.

Attachment

Attach the action camera into the protective casing. The protective casing can be fitted with supplied mounting accessory to your clothing, action gear, helmet, etc.

Use

Record pictures and video images

In video mode, press OK to start or stop recording video.
In picture mode, press OK to take a picture.

View pictures and video images

In view mode, press UP or DOWN to go to the next or previous picture or video. Press OK to play and stop videos.

Settings menu navigation

In the settings menu, use UP and DOWN to navigate between options. Press OK to select and confirm options.

Video settings menu

Setting	Description
Video resolution	Select the video resolution.
Distortion correction	Enable or disable the correction of lens distortion.
White balance	Select white balance.
Exposure	Compensate exposure when videos or photos are too light or too dark.
Metering mode	Select the metering mode. Choose between average, center, spot and matrix.
Sharpness	Select sharpening of pictures and video images.
Video quality	Select video quality.
ISO	Select light sensitivity.
Time watermark	Enable or disable imprinted date and time on the pictures.
Record audio	Enable or disable the recording of sounds in video images.

Photo settings menu

Setting	Description
Pixel inset	Select the image size.
White balance	Select white balance.
Exposure	Compensate exposure when videos or photos are too light or too dark.
Metering mode	Select the metering mode. Choose between average, center, spot and matrix.
Sharpness	Select sharpening of pictures and video images.
Long exposure	Use long exposure to capture a long period of time in one photograph.
ISO	Select light sensitivity.
Time watermark	Enable or disable imprinted date and time on the pictures.

General settings menu

Setting	Description
Image rotation	Enable 180 degrees rotation if you mount the camera upside down.
Wi-Fi	Enable or disable Wi-Fi.
Wi-Fi information	View Wi-Fi ID and password.
Reset Wi-Fi	Reset Wi-Fi to default settings.
Light source frequency	Select the frequency of your power outlet.
Led indicator light	Enable or disable the LED indicator light.
Auto screensaver	Select the time period after which the display turns off to save power.
Auto shutdown	Select the time period after which the camera turns off when not recording.
Button prompt	Select the volume of the beeps audible when camera buttons are pressed.
Language	Select the desired operating language for the camera.
Time format	Choose how the time is displayed.
Time set	Set the time
Date set	Set the date.
Format	Delete all files on the microSD card.
Version	View the version of the software.
Factory setting	Return all settings to manufacturer defaults.

Transfer files to external device.

Connect the camera to your device with the micro USB cable. Transfer files you want to save to your device.
Alternatively, take the microSD card from your camera and insert it into a card reader that is connected to your device.

Use with N-go Real 4K App

Use the N-go Real 4K App on your mobile device to review images and videos, transfer them to your mobile device, take pictures, record video, toggle picture and video modes and change settings.

The app works best with iPhone or Android version 8.0 and up.

1. Switch on your camera. Hold UP for 3 seconds to activate Wi-Fi.

2. Install and open the N-go Real 4K App. Select Wi-Fi network N-Go Real 4K. Enter password 12345678 to connect.

Once the connection is established, you see the live view of the camera. You can now control the camera with the app.

Tap the record button in the bottom to start or stop recording a video.

Tap the smaller button in the bottom to toggle between picture and video mode.
Tap the settings icon with the camera in the op right to enter the device parameters menu.

Tap the settings icon in the top right to enter the menu of the current shooting mode.

Video modes	Action when pressing the video icon
Video	Record a video.
Slowly	Make a slow-motion video.
Loop	Automatically record videos according to the set video length.
Lapse	Make a time-lapse (sped up video).

Photo modes	Action when pressing the photo icon
Photo	Take a picture.
Auto	Automatically take pictures according to an interval.
Burst	Take 3 pictures quickly after each other.
Timer	Take a picture after a countdown.

Tap the media gallery button in the bottom left to review, delete or download pictures and videos to your mobile device.

Tap the grey circle in the bottom right to change the resolution.

When you are done, press UP on the camera to return to the video or picture mode.

View pictures and video images on external device

Ultra HD cable is not included.

To view the pictures and video images on a TV or monitor without transferring any files, connect the camera with an ultra HD cable to the external device.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.

Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product ACAM61BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/ACAM61BK#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands

References

User Manual

ACAM61BK Action Camera

Preface

Product description

Intended use

Specifications