U-PROX ស្វ័យប្រវត្តិ Tag
ការពិពណ៌នា
A contactless active identifier designed for vehicle identification as well as for enhancing logistics efficiency in the transportation of goods and cargo.
It can be used for marking vehicles, large objects, carts, containers, etc.
REPLACING THE POWER SOURCE WITH AN INCORRECT TYPE MAY CAUSE A FIRE OR EXPLOSION. DISPOSE OF USED POWER SOURCES ACCORDING TO LOCAL LAWS AND REGULATIONS.
U-PROX AUTO TAG IS SHIPPED OFF. TO TURN THE DEVICE ON, MOVE THE SWITCH TO THE ON POSITION
លក្ខណៈពិសេស
U-PROX ស្វ័យប្រវត្តិ Tag works only with readers of the U-PROX SL and UPROX SE series and is used to transmit the identifier.
Device Functional Elements
- Upper cover of the device housing
- Lower plate of the device housing
- សូចនាករ LED
- Device capsule
- កុងតាក់បិទ/បើក
- Power source, CR123A battery
របៀបប្រតិបត្តិការ
U-PROX ស្វ័យប្រវត្តិ Tag operates in the “active identifier” mode.
ឧបករណ៍កំណត់អត្តសញ្ញាណសកម្ម
In this mode, U-PROX Auto Tag periodically, once every 0.5 seconds, transmits brief information about itself and its readiness to interact with the reader over the radio.
Upon receiving such a notification, the reader calculates the distance to the UPROX Auto Tag, and if it matches the one set in the reader and the reader has not yet interacted with this U-PROX Tag, data is exchanged between the reader and the tag. The reader transmits the identifier code obtained from the U-Prox Tag ទៅឧបករណ៍បញ្ជា។
For re-interaction with the reader, U-PROX Auto Tag must leave the reader’s range or stop transmitting its signal for more than 6 seconds.
Using U-PROX Tag
Readers support hardware active mobile identifiers U-PROX Tag និង U-PROX Auto Tag.
Interaction with Readers in “Door” Mode
Approach the reader at a distance of 0.5 – 1 m with your U-PROX Auto Tag.
Data will be exchanged between the reader and the tag, and the reader will transmit the identifier code obtained from the U-PROX Auto Tag ទៅឧបករណ៍បញ្ជា។
If the code meets the access rules, the controller will allow passage (unlock the door, etc.).
Interaction with Readers in “Barrier” Mode
Approach the reader at a distance of 3 – 12 m (depending on the reader’s settings) with your U-PROX Auto Tag. Data will be exchanged between the reader and the tag, and the reader will transmit the identifier code obtained from the U-PROX Tag ទៅឧបករណ៍បញ្ជា។
If the code meets the access rules, the controller will allow passage (open the barrier, etc.).
Registration in the Access Control System
Bring the turned-off U-PROX Auto Tag close to the desktop reader at a distance of 10 – 20 cm and turn on the device. The code will be read and transmitted to the access control system for further registration.
ការធានា
The warranty period for U-PROX devices (excluding power sources) is 2 years from the date of purchase. If the device does not operate properly, please contact support@u-prox.systems first, as the issue may be resolved remotely.
ជំនួយអតិថិជន
https://u-prox.systems/en/uproduct/u-prox-auto-tag/
ឯកសារ/ធនធាន
 |
U-PROX ស្វ័យប្រវត្តិ Tag [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ ស្វ័យប្រវត្តិ Tag, Auto, Tag |