KTC H32S17F LCD Monitor User Guide
Model: KTC H32S17F
Product Introduction
This is a high-performance intelligent multiple frequency scanning display featuring an active matrix thin-film transistor LED-backlit LCD. Controlled by microcomputer MCU digital technology, it is compact and lightweight, making it suitable for narrow working spaces.
Package Contents
Before installation, please check if the following items are included in the packing box:
- LCD x1
- Signal Cable x1
- Power Adapter x1
- Warranty Card x1
- Screwdriver x1
- User Guide x1
- Power Cord x1
- Base and mounting screws (M4x16 * 2)
If any items are missing, please contact your product distributor immediately. Specific accessories are subject to the actual product. Please retain packing materials for future transport.
Base Installation and Removal
Installing the Base:
- Install the base onto the stand and fasten it with two M4x16 screws.
- Tilt the base in the direction of the second arrow and install it into the backshell hole.
- Press and lock the whole base in the direction of the third arrow.
Removing the Base:
- Push the quick release button located near the VESA mount.
- Remove the entire base in the direction of the arrow.
Keys and Interfaces
Monitor Controls:
- Joystick: Navigate menus and settings.
- Power Indicator: Shows the power status of the monitor.
Initial Shortcut Keys:
- ↑: Signal Source Input
- ↓: Luminance
- Gaming Assistance Shortcut Key
- Preset Shortcut Key
Power Button: Short-press to turn on the display. Press and hold for 3 seconds to turn off the display.
Interface Ports:
- DC IN
- USB (for firmware updates only)
- HDMI 1
- HDMI 2
- DP
Navigation:
- ↑: Move Up
- ↓: Move Down
- Exit/Return: Return to the previous menu.
- Open Sub-menu/Select: Open sub-menus and select options.
Signal Cable and Headset Connection
Signal Cable Connection: Connect the signal cable to the HDMI or DP output port on your PC and the corresponding input port on the LCD monitor.
Headset Connection: Connecting a headset will enable audio output. External loudspeakers are also supported.
USB Upgrade: The USB port is exclusively for updating display firmware using a USB mobile device. Do not connect other devices. USB provides 5V/0.5A.
Power Indicator
A blue indicator signifies the display is functioning correctly. A flashing red indicator means there is no signal. In energy-saving mode, the display will resume normal operation when a signal is provided. The display remains powered on in standby mode. Unplug the power cord when not in use for safety.
Bracket Tilt
The bracket allows tilting the screen up and down within a range of -5° to 15°.
Mounting Location and Ventilation
Ensure a minimum clearance of 10cm around the display for proper ventilation. Do not cover ventilation holes or insert objects into the shell. Avoid placing the display in confined spaces without adequate ventilation, such as inside a bookshelf or closet.
Wall Mounting: The display supports VESA wall mounting with a 100mm x 100mm pitch.
Product Technical Specifications
- Panel Dimension: 31.5"
- Best Operating Resolution Ratio: 1920x1080 @ 240Hz
- Input Voltage: DC 19V/3.42A
- Contrast: 3500:1 (TYP)
- Visible Area: 697.344mm x 392.256mm
- Pitch size for wall mount: 100mm x 100mm
Working Environment Requirements
- Maximum altitude: 5000m
- Atmospheric pressure: 86kPa~106kPa
- Operating temperature and humidity: 0℃~40℃, 30%~90% (Non-condensing)
- Storage temperature and humidity: -20℃~55℃, 20%~93% (Non-condensing)
Packing Dimension and Weight
- Display Dimension (excluding base): 711 x 422 x 106mm
- Packing Dimension: 790 x 535 x 170mm
- Net Weight of Display (including base): 6.0Kg
- Packing Weight: 8.2Kg
Installation Guide
- Install the display near an easily accessible AC power socket.
- Using the provided base is recommended for safety.
- Place the display on a smooth horizontal surface to prevent injury.
- Avoid placing the display where it may be subjected to mechanical vibration.
- Do not place the display where insects might enter.
- Avoid placing the display directly facing an air conditioner to prevent condensation and potential faults.
- Do not place the display in environments with strong electromagnetic fields, as it may be interfered with or damaged by electromagnetic waves.
Safety Protection
If the PC video signal frequency exceeds the display's range, the display will disable sync signals to protect itself. In such cases, adjust the PC's output frequency to an acceptable range for proper operation.
Power Management System
- Normal Operation Power Consumption: ≤65W
- Standby Power Consumption: ≤0.5W
Note: Technical specifications are subject to change without prior notice. In case of discrepancies between the user guide and the actual product, the latter prevails.
Simple Problems Disposal
| Symptom | Disposal Methods |
|---|---|
| Blank screen / Power indicator does not work | Check if the power supply is securely connected to the display and the power socket. Ensure the display is turned on. |
| Blurred images (too large or too small) | Navigate to "Image Settings" and select "Image Auto Adjust" for automatic monitor adjustment (VGA monitors only). |
| Dark screen | Adjust the display's contrast and brightness via the "Brightness & Contrast" menu. |
| Display overheating | Ensure at least 10cm of ventilated space around the display. Do not place objects on the display. |
| Dark/light spots when powered on | This is normal. Uneven light emission from the backlight tube may occur initially due to temperature differences. Normal light emission and elimination of spots should occur within 20 minutes of operation. |
| Image distortion, flashing, shaking | Check your computer's configuration, select the correct resolution, and reset the refresh rate. |
| Noisy signal when powered off | This may be due to normal discharge of residual signals on the screen when the display is powered off. |
Important Safety Precautions
- Read all instructions carefully before use.
- Unplug the power cord before cleaning. Wipe the display with a soft, damp cloth. Use LCD screen cleaner for stubborn stains. Avoid liquid or spray cleaners.
- Do not use unapproved accessories, as they may cause danger.
- When unplugging the power cord or adapter, hold the plug, not the cord.
- Keep the display away from water sources (bathtubs, sinks, etc.) and wet ground. Do not place near swimming pools. Avoid pressing the LCD screen with fingers or hard objects.
- Ensure ventilation holes are not blocked. Do not place the display on soft surfaces like beds or carpets, or near radiators/heaters. Do not place in embedded devices without adequate ventilation.
- Use only the specified power supply type. Consult your dealer or local power administration if unsure.
- The three-prong plug must be used with a properly grounded socket for safety. Contact an electrician to replace incompatible sockets.
- Do not attempt to repair the display yourself. Contact qualified maintenance personnel.
- Unplug the power cord and contact qualified personnel if: the power cord/plug is damaged, the display is dropped or the shell is damaged, or any obvious abnormality requires repair.
- Place the display in a well-ventilated area, away from strong light, high temperatures, and humidity.
- Store the display within a temperature range of -20°C to 55°C to prevent permanent damage.
- The monitor screen is fragile; handle with care during movement.
More Information
Scan the QR code or visit en.ktcplay.com for more information.
For questions or comments, contact:
- support@ktcplay.com [North America]
- support.eu@ktcplay.com [Europe]
HDMI and the HDMI Logo are trademarks of HDMI Licensing Administrator, Inc.
Regulations for Waste Electrical and Electronic Products
To protect the environment, please send this product to a qualified local manufacturer for recycling according to applicable laws and regulations when it is no longer needed or at the end of its service life.
