Traceable 4-Channel Timer Quick-Start Guide

Model: 5667 | Item No.: 56000-16

Brand: Traceable

Product Overview

This guide provides instructions for the Traceable 4-Channel Timer, Model 5667. It covers initial setup, setting timers, starting/stopping timers, and clock adjustments.

Traceable Products are ISO 9001:2018 Quality-Certified by DNV and ISO/IEC 17025:2017 accredited as a Calibration Laboratory by A2LA.

Initial Setup

Follow these steps to set up your timer:

Remove the battery cover and insert batteries. The battery compartment is located on the back of the device.
Diagram Description: The back of the timer is shown with the battery cover removed, revealing a compartment for two AAA batteries.
Replace the battery cover.
Press the CH/Clock button. The clock display will appear on the top row of the screen.
Diagram Description: The timer display shows "88:88:88" with AM/PM indicators, indicating the clock mode.

Key buttons include: Start/Stop All, CH/Clock, Clear, +, -, H, M, S.

Setting a Timer

Press the CH/Clock button repeatedly until the desired channel indicator (CH1, CH2, CH3, or CH4) is solid (not flashing) on the screen.
Use the H, M, and S buttons to set the desired time for the timer.

Note: To clear any entered time and start over, press the Clear button.

Starting and Stopping Timers

To start/stop an individual timer: Navigate to the specific channel using the CH/Clock button, then press the Start/Stop All button.
To start/stop all timers simultaneously: Ensure the display is showing the clock, then press the Start/Stop All button.

Timer status indicators:

Timers that are counting down will flash quickly.
Timers that are counting up will flash slowly.
Timers that have expired will flash rapidly.

Clock Adjustment

To enter clock setup mode, press and hold the CH/Clock button until an audible beep is heard and the time on the display begins to flash.
To switch between 12-hour and 24-hour formats, press and hold the Start/Stop All button.
Use the H, M, and S buttons to adjust the hours, minutes, and seconds respectively.
Pressing the S button will round the current minute to the nearest whole minute.
Once the clock is set, press the CH/Clock button to exit setup mode.

	Traceable 4-Channel Timer Quick-Start Guide A quick-start guide for the Traceable 4-Channel Timer (Model 5667). Provides instructions for initial setup, setting individual timers, starting and stopping timers, and understanding timer status indicators. Includes warranty and service information.
	Traceable 3-Channel Timer Quick-Start Guide - Setup and Operation Concise guide to setting up and operating the Traceable 3-Channel Timer (Model 5665), including initial setup, timer configuration, and starting/stopping channels. Features warranty and service information.
	Traceable 5665 Three Channel Timer Quick Start Guide Quick start guide for the Traceable 5665 three-channel alarm timer, covering initial setup, timer setting, and starting/stopping functions. Includes warranty and contact information.
	Traceable® 3-Channel Timer Quick-Start Guide - Setup and Operation Concise guide to setting up and operating the Traceable® 3-Channel Timer (Models 56000-13, 5665), including initial setup, timer configuration, and starting/stopping functions.
	Guía de Inicio Rápido del Temporizador Traceable de 3 Canales Instrucciones y guía de configuración para el temporizador Traceable de 3 canales, modelo 5665, incluyendo configuración inicial y operación.
	Traceable 5665 3-Channel Timer Quick-Start Guide Quick-start guide for the Traceable 5665 3-Channel Timer, covering initial setup, setting the clock and alarm, and configuring and starting timers. Includes product specifications and company information.
	Traceable Refrigerator/Freezer Digital Thermometer Quick-Start Guide Quick-start guide for the Traceable Refrigerator/Freezer Digital Thermometer (Models 5650, 5651, 5652). Learn how to set up, configure alarms, and understand display messages for accurate temperature monitoring.
	Traceable 3-Channel Timer 5665 Quick Start Guide Concise guide to setting up and operating the Traceable 3-Channel Timer (Model 5665), including initial setup, timer configuration, and starting/stopping functions.