ZZ 2 IT2-MAS-QTG CarPlay Android Auto Interfaces

Swaraview

Thank you for purchasing a genuine ZZ-2 CarPlay/Android Auto interface – the highest quality smartphone integration system on the market! We guarantee your satisfaction with this OE integration provided it is installed & used properly. Each kit has been specifically designed to work in the most logical way possibleusing OE controls. Due to the large variety of vehicle entertainment systems, some limitations will apply.

KOMPONEN KIT

DIP SWITCH SETTINGS

Dip Switch Settings – Reset power after changes (or press button fully once)

Cathetan:

• You must be in AUX Audio source mode (OE Land Rover system in order to hear audio playback from CarPlay/AA.
• The entire installation happens at the RADIO, not the screen.
• The provided ‘Dummy AUX plug’ must be connected to the OE AUX input port to allow for AUX in sound.

IT2 iPhone Pairing

Kanggo sistem iki, luwih becik nyoba nyambungake menyang telpon liwat antarmuka dhisik, lan yen ana masalah nyambungake, golek antarmuka liwat telpon (liwat Bluetooth) sajrone operasi iki.

1. Miwiti kanthi ngaktifake Bluetooth lan WIFI ing iPhone dhisik (Setelan> Bluetooth - atur ON, banjur Setelan> WIFI - atur ON )
2. Sabanjure, kanthi layar menu antarmuka ing layar radio (pirsani dokumen mudhun kanggo informasi babagan ngalih menyang antarmuka), pilih Setup.
3. Sawise ing setelan, geser mudhun menyang Bluetooth.
4. Sawise ing 'Bluetooth', pilih Temokake.
5. Sakcepete sawise ngetik menu 'Temokake', 'iPhone' kudu katon. Pilih, lan bakal takon kanggo masangake. Pasangake karo telpon kanggo miwiti proses registrasi CarPlay.
6. Tindakake pituduh ing telpon kanggo ngidini lan nggunakake CarPlay. Kanggo langkah-langkah rinci babagan proses iki, deleng kaca sabanjure. Sawise pasangan dhisikan rampung, CarPlay kudu mbukak sakcepete. Yen ora, bali menyang menu utama, banjur pilih 'CarPlay'.

1.  Nalika nggunakake kabel USB kanggo nyambungake iPhone, mung nggunakake kabel Apple certified.
2. Kanggo nggunakake konektivitas nirkabel, tindakake langkah iki:
   • a. Go to Settings > Bluetooth and the phone should be able to find a Bluetooth device called ‘IDCORE’ or ‘ZZ2’ under ‘Other Devices’.
3. Panjaluk Pairing Bluetooth bakal ditampilake ing layar kanthi kode tartamtu sing kudu cocog karo sing ditampilake ing CarPlay. Pilih 'Pair'. Cathetan: sawise sambungan BT, ora perlu nyoba lan nyambungake WIFI kanthi manual (sanajan kudu ON), sawise proses sambungan BT rampung, WIFI bakal nyambung kanthi otomatis.
4. Sanalika sawise kabar Pairing, panjalukan anyar kanggo Nyelarasake kontak karo mobil bakal ditampilake. Pilih 'Allow' supaya duwe ID panelpon lan akses menyang kontak liwat CarPlay.
5. A notification asking for a permission to connect your iPhone to the car even when the phone is locked will pop up. Select ‘Use CarPlay’ and the CarPlay main screen should show up on the factory radio screen. If not, press and hold the radio switching button (Arrow button).

NOTE: If you’re having pairing issues:

• Nindakake 'hard reset' ing telpon (ora bakal mbusak data) kanggo nyegah malfunction: Kanthi telpon ora dikunci, penet & release VOL +, banjur penet & release VOL-, banjur penet lan HOLD daya kanggo 10 detik (ngenteni urip maneh - aja ndemek layar).
• DELETE ALL other ‘CarPlay’ devices out of the phone (delete all in ‘Settings – General – CarPlay )+
• Verifikasi 'Mode Data Kurang' ora diaktifake ing setelan telpon.
• Priksa manawa antena ora dipasang ing mburi panel dasbor logam.

IT2 Android Pairing

Kanggo sistem iki, luwih becik nyoba nyambungake menyang telpon liwat antarmuka dhisik, lan yen ana masalah nyambungake, golek antarmuka liwat telpon (liwat Bluetooth) sajrone operasi iki.

1. Miwiti kanthi nguripake Bluetooth ing iPhone dhisik (Setelan> Bluetooth - atur ON, banjur Setelan> WIFI - atur ON)
2. Sabanjure, kanthi layar menu antarmuka ing layar radio (pirsani dokumen mudhun kanggo informasi babagan ngalih menyang antarmuka), pilih Setup.
3. Sawise ing setelan, geser mudhun menyang Bluetooth.
4. Sawise ing 'Bluetooth', pilih Temokake.
5. Sakcepete sawise ngetik menu 'Temokake', jeneng telpon Android kudu katon. Pilih, lan bakal takon kanggo masangake. Pasangake karo telpon kanggo miwiti proses registrasi Android.
6. Follow the prompts on the phone to allow and use Android Auto. For a \detailed step by step on this process, see the next page. Once the initial pairing is complete, Android Auto should load shortly. If not, go back to the main menu, and select ‘Android’.

1. Nalika nggunakake kabel USB kanggo nyambungake Android, mung nggunakake kabel OE Android certified.
2. Kanggo nggunakake konektivitas nirkabel (mung Android 11+), tindakake langkah iki:
   • a. Go to Settings > Bluetooth Device Connection, or LONG PRESS on the Bluetooth toggle to enter Bluetooth connections
   • b. Select ‘Pair new device’
   • c. Choose ‘IDCORE’ or ‘ZZ2’
   • d. Bluetooth Pairing Request will be displayed on the screen with a specific code. Select Pair. Note: following the BT connection, there is no need to try and connect WIFI manually (although it does need to be ON), after the BT connection process is complete, the WIFI will connect automatically on its own.
   • e. Immediately following the Pairing notification, a system prompt may or may not appear for contacts sharing with the system. Allow all requests for the best user experience.
   • f. Shortly after allowing/denying pairing requests, Android Auto will appear on the main screen automatically (for most phones). If not, press & hold the switching button for 2 seconds to switch in and out of Android Auto (to OE radio mode): Arrow button
   • Not every Android phone will work wirelessly. Pixel, Samsung & OnePlus devices equipped with Android 11 (or higher) have been tested to function well wirelessly. If your phone is having issues with wireless connectivity, verify with the installer that the antenna is not mounted behind any metal. If issues continue, use the original USB-C cable instead and connect to the interface’s USB Input (do NOT use an aftermarket USB cablel – also, the vehicle’s USB port is NOT used).
   • Verifikasi manawa 'Android Auto' wis diinstal ing telpon.
   • Verifikasi manawa ing setelan Android Auto (telpon) yen 'Nirkabel' wis diuripake.
   • Priksa manawa WIFI ON. WIFI bakal nyambung kanthi otomatis sawise Bluetooth wis dipasangake kanthi bener.

IT2 Antarmuka Menu Swaraview

To gain access to the Interface menu, start in CarPlay/AA mode, and locate the exit tile, labeled as ‘Maserati’ or ‘Exit’. Selecting this tile will bring you in the interface setup menu, NOT the Maserati OE system.

IT2-MAS-QTG CarPlay/AA Activation

CALL AUDIO ROUTING: If using the OEM system to handle phone calls, answer incoming calls with the steering wheel. Also if using iPhone, set ‘Call Audio Routing’ to ‘Bluetooth Headset” (default is ‘Automatic’).

Kontak

• support@zz-2.com
• 929-220-1212
• Bebas pulsa: 877-241-2526
• Ekstensi 2: Dhukungan Teknis

Persetujuan: Pangguna pungkasan setuju nggunakake produk iki selaras karo kabeh hukum Negara lan Federal. ZZDOIS LLC dba ZZ-2 ora tanggung jawab kanggo nyalahi panggunaan produke. Yen sampeyan ora setuju, mangga mandheg nggunakake lan bali produk menyang pengecer. Produk iki mung kanggo panggunaan ing dalan lan hiburan penumpang.

Dokumen / Sumber Daya

ZZ 2 IT2-MAS-QTG CarPlay Android Auto Interfaces [pdf] Pandhuan pangguna IT2-MAS-QTG, IT2-MAS-QTG Antarmuka Otomatis Android CarPlay, IT2-MAS-QTG, Antarmuka Otomatis Android CarPlay, Antarmuka Otomatis, Antarmuka

Referensi

• Manual pangguna