nul 88 Sunting Memori Chilli Pro Bypass Dimmer Instruction Manual

Sunting Memori Chilli Pro Bypass Dimmer

“

Spesifikasi:

• Model: Zero 88 Chilli Pro
• Memory Capacity: 12 memories
• Rentang Wektu Luntur: 1 – 60 detik

Pandhuan panggunaan produk:

Mode standar:

1. Select “Edit Memory” from the Memories menu.
2. Press the ENT key to confirm.
3. Select the memory (1-12) using the numeric keypad or cursor
   tombol.
4. Adjust the channel levels as required.
5. Press ESC key to adjust the fade time (1-60 seconds).
6. Press ENT key to save the changes.

ChilliNet Mode:

1. Select “Edit Memory” from the Memories menu.
2. Press the ENT key to confirm.
3. Select the area and memory for editing.
4. Adjust the channel levels as required.
5. Press ESC key to adjust the fade time (1-60 seconds).
6. Press ENT key to save the changes.

FAQ:

Q: What should I do if the memory is unprogrammed?

A: If a memory is unprogrammed, a star (*) will be shown next to
the memory number, and editing is not possible. You need to program
the memory first before editing it.

Q: How many memories can be stored in the device?

A: The device can store up to 12 memories for easy access and
kustomisasi.

“`

Sunting Memori
Watch this video to find out about editing memories.

Standard Mode This option allows you to edit the channel values and fade time of a programmed memory stored on the dimmer. Select the Edit Memory option from the Memories menu, and press the ENT key. The screen shows:
Edit Memory xx
If the memory is unprogrammed – a star (*) is shown next to the memory number and the memory cannot be edited. Use the numeric keypad or cursor keys to select the required memory (1-12), then press the ENT key to confirm. If the memory is programmed – the dimmer outputs the selected memory and the screen shows:
Channel: 1 Level: xxx
The cursor is shown in the Channel field. The Level field shows the programmed value for the channel. Adjust the level of each channel as required. This operation uses the same user interface as the Set Channel Level function in Manual Control. Press the ESC key. The screen shows:
Memori: xx Fade Wektu: xx
The Memory field is for information only. The cursor appears in the Fade Time field. Use the numeric keypad or cursor keys to adjust the fade time as required (1 – 60 seconds).

Zero 88 – Chilli Pro – Kaca 1 saka 3

Dicithak: 03/08/2025

Press the ENT key to save the fade time and the channel levels into the memory. The screen briefly shows a confirmation, and then returns to the Edit Memory screen. The memory is removed from the outputs.
ChilliNet Mode This option allows you to edit the channel values and fade time of a programmed memory for a selected area stored on the dimmer. Select the Edit Memory option from the Memories menu, and press the ENT key. The screen shows:
Area: 1 Memori: xx
If the memory for the chosen area is unprogrammed – a star (*) is shown next to the memory number and the memory cannot be edited. The cursor appears in the Area field. Enter the required area number using the numeric keypad or cursor keys, then press the ENT key. If the area number is valid, the cursor moves to the Memory field. Use the numeric keypad or cursor keys to select the required memory (1 – 12), then press the ENT key to confirm. If the memory for the chosen area is programmed – the dimmer outputs the selected memory and the screen shows:
A(xx) Channel: 1 Level: xxx
The area number field A(xx) is for information only. The cursor is shown in the Channel field. The Level field shows the programmed value for that channel in the memory. Adjust the level of each channel as required. This operation uses the same user interface as the Set Channel Level function in Manual Control. Only those channels which are assigned to the specified area may be selected and edited. Press the ESC key. The screen shows:
Area xx Mem xx Fade Wektu: xx
The Area and Memory fields are for information only and are not editable.

Zero 88 – Chilli Pro – Kaca 2 saka 3

Dicithak: 03/08/2025

The cursor appears in the Fade Time field. Use the numeric keypad or cursor keys to adjust the fade time as required (1 – 60 seconds). Press the ENT key to save the fade time and the channel levels into the memory. The screen will briefly show a confirmation, and then return to the Edit Memory screen. The memory is removed from the outputs.

Zero 88 – Chilli Pro – Kaca 3 saka 3

Dicithak: 03/08/2025

Dokumen / Sumber Daya

zero 88 Edit Memory Chilli Pro Bypass Dimmer [pdf] Instruksi Manual Edit Memory Chilli Pro Bypass Dimmer, Edit Memory, Chilli Pro Bypass Dimmer, Bypass Dimmer, Dimmer

Referensi

• Manual pangguna