Sensor Gerakan Cerdas R1
Pandhuan wiwitan cepet
Deskripsi Produk
The THIRDREALITY Motion Sensor R1 is the perfect companion for a smarter, more secure home. Seamlessly integrating with popular Zigbee hubs like Echo devices with built-in Zigbee hubs, SmartThings, and Home Assistant, it fits effortlessly into your existing setup. Imagine customizing its detection range from 1.5 to 9.5 meters to monitor your living room, hallway, or office just the way you need. With three AA batteries, the sensor delivers long-lasting performance up to 3 years in typical use, so you can focus on what’s important without constant maintenance. Set up routines via compatible apps to turn on lights as you enter a room or receive instant alerts when motion is detected, adding convenience and peace of mind. Whether placed discreetly on a shelf or mounted on a wall, the Motion Sensor R1 adapts to your space, keeping your home connected and secure.
Spesifikasi
| jeneng | Sensor Gerakan Cerdas R1 |
| Model | 3RSMR01067Z |
| ukuran | 2.56 inci × 1.18 inci × 2.56 inci |
| Operasional Voltage | DC 4.5V |
| Jinis baterei | AA battery × 3 (included) |
| Frekuensi Kerja | Zigbee 3.0 : 2.4GHz, Radar : 5.8GHz |
| Kondisi Kerja | Mung nggunakake njero ruangan |
| Kisaran Suhu Kerja | Default 0~40 ℃ (indoor) |
Ndeteksi Level & Range
| tingkat | Range (m/inch) |
| 1 | 1.5 / 59 |
| 2 | 3.5 / 138 |
| 3 | 5.5 / 217 |
| 4 | 7.5 / 295 |
| 5 | 9.5 / 374 |
Fungsi tombol
| Fungsi | tata cara | |
| Reset (+) | Reset Indikasi | Pencet terus nganti 10 detik |
| Ningkatake sensitivitas | Klik sapisan | |
| LED (-) | En/Disable motion detect light | Pencet terus nganti 3 detik |
| Ngurangi sensitivitas | Klik sapisan |
status LED
| Operasi | Katrangan |
| Reset pabrik | LED dipadhangi lampu. |
| pasangan | The LED flashes rapidly. |
| Gerakan dideteksi | When the device is triggered, the indicator light for the current sensitivity level will illuminate for 1 second. |
| Offline | The LED flashes once every 3 seconds. |
| Baterei sithik | The LED flashes twice every 5 seconds. |
*Lampu indikator sensitivitas bakal digunakake maneh karo lampu indikator status.
Setup
- Bukak tutup baterei ing piranti banjur copot jalur insulasi kanggo daya piranti.
- Nalika piranti urip, indikator sensitivitas bakal sumunar kanthi cepet lan piranti bakal mlebu ing mode pasangan Zigbee. Yen sensor ora ana ing mode pasangan, penet terus tombol + kanggo 10 detik kanggo pabrik ngreset sensor.
- Tindakake pandhuan ing platform kanggo nambah piranti.
Platform sing kompatibel
| Platform | Syarat |
| Amazon | Echo karo hub Zigbee sing dibangun |
| SmartThings | 2015/2018 model, Station |
| Asisten omah | ZHA lan Z2M karo Zigbee dongle |
| Habitats | Kanthi hub Zigbee |
| Kasunyatan Katelu | Smart Hub/Smart Bridge MZ1 |
| omahe | Homey Bridge/Pro |
| Aeotec | Aeotec Hub |
Nggunakake Kasus
- Hang or place the R1 sensor in a suitable and sturdy location. This location should be away from the wireless router and places where there may be slight vibrations (such as washing machines). If there are multiple R1 sensors, avoid overlapping sensing areas to cause false alarms.
- After completing the installation, you should first adjust the sensor’s sensitivity. There are 5 sensitivity levels from low to high, represented by numbers 1-5. Please try the sensing distance from level 3 (The default is level 3). If the sensing distance is too close, you can switch to a higher level, otherwise you should adjust to a lower level. The sensitivity and LED indicator switch can only be adjusted on the device.
- Start setting the routine. The R1 sensor is the same as the Wireless Motion sensor. You can select the R1 sensor as the trigger on the platform, and then set some switches or devices as reactors.
Nalika piranti dipicu, lampu indikator kanggo tingkat sensitivitas saiki bakal murup sajrone 1 detik.
Instalasi
Prodhuk kasebut nduweni desain anti-slip, ngidini diselehake langsung ing meja utawa dipasang ing tembok kanthi nggunakake sekrup.
- Vertically placed on table
- Gantung ing tembok
Ngatasi masalah
To achieve the desired detection accuracy:
- Do not install the sensor on a metal surface. If you need to install it, please place a non-metallic insulating layer (e.g. plastic or rubber pad, >5mm thick) between the radar and the metal surface.
- When installing the sensor, please keep it at least 1m away from other wireless devices that will create a strong signal field (e.g. Wireless router).
- When installing multiple radar sensors, do not place the detection surfaces opposite each other.
Pindai QR-kode kanggo view rincian
Kesesuaian Regulasi FCC
Piranti iki tundhuk karo bagean 15 saka aturan FCC. Operasi tundhuk karo rong syarat ing ngisor iki:
- piranti iki bisa uga ora nimbulaké gangguan mbebayani.
- piranti iki kudu nampa gangguan apa wae sing ditampa, kalebu gangguan sing bisa nyebabake operasi sing ora dikarepake.
Owah-owahan utawa modifikasi sing ora disetujoni kanthi jelas dening pihak sing tanggung jawab kanggo kepatuhan bisa ngilangi wewenang pangguna kanggo ngoperasikake peralatan kasebut.
CATETAN: Peralatan iki wis dites lan ditemokake tundhuk karo watesan kanggo piranti digital Kelas B, miturut bagean 15 Aturan FCC. Watesan kasebut dirancang kanggo menehi pangayoman sing cukup marang gangguan sing mbebayani ing instalasi omah. Peralatan iki ngasilake panggunaan lan bisa mancarake energi frekuensi radio lan, yen ora dipasang lan digunakake miturut pandhuane, bisa nyebabake gangguan sing mbebayani kanggo komunikasi radio. Nanging, ora ana jaminan manawa gangguan ora bakal kedadeyan ing instalasi tartamtu. Yen peralatan iki nyebabake gangguan sing mbebayani kanggo panrima radio utawa televisi, sing bisa ditemtokake kanthi mateni lan nguripake piranti kasebut, pangguna disaranake nyoba mbenerake gangguan kasebut kanthi siji utawa luwih saka langkah-langkah ing ngisor iki:
ERori utawa relakake antena sing nampa.
- Nambah pamisahan antarane peralatan lan panrima.
- Sambungake peralatan menyang stopkontak ing sirkuit sing beda karo sing disambungake karo panrima.
‐Consult the dealer or an experienced radio/TV technician for help important announcement.
CATETAN: Pabrikan ora tanggung jawab kanggo gangguan radio utawa TV sing disebabake dening modifikasi sing ora sah kanggo peralatan iki. Modifikasi kasebut bisa ngilangi wewenang pangguna kanggo ngoperasikake peralatan kasebut.
Pernyataan Paparan Radiasi
Peralatan iki tundhuk karo watesan paparan radiasi FCC sing ditemtokake kanggo lingkungan sing ora dikendhaleni.
Peralatan iki kudu dipasang lan dioperasikake kanthi jarak minimal 20cm antarane radiator lan awak.
Pemancar iki ora kena dipasang utawa dioperasikake bebarengan karo antena utawa pemancar liyane.
Pernyataan ISED
Piranti iki tundhuk karo standar RSS sing dibebasake lisensi Inovasi, Ilmu Pengetahuan lan Ekonomi Kanada.
Operasi tundhuk karo rong syarat ing ngisor iki:
(1) piranti iki bisa uga ora nyebabake gangguan, lan (2) piranti iki kudu nampa gangguan apa wae, kalebu gangguan sing bisa nyebabake operasi piranti sing ora dikarepake.
Peralatan iki tundhuk karo watesan paparan radiasi ISED sing ditemtokake kanggo lingkungan sing ora dikendhaleni. Peralatan iki kudu dipasang lan dioperasikake kanthi jarak minimal 20 cm antarane radiator lan awak. Pemancar iki ora kena dipasang utawa dioperasikake bebarengan karo antena utawa pemancar liyane.
Warranty winates
Kanggo garansi winates, bukak https://3reality.com/faq-help-center/
Kanggo dhukungan pelanggan, hubungi kita ing info@3reality.com utawa ngunjungi www.3reality.com
For questions on other platforms, visit the corresponding platform’s application/support platform.
Dokumen / Sumber Daya
 |
THIRDREALITY R1 Smart Motion Sensor [pdf] Pandhuan pangguna R1_QSG_20250310, R1, R1 Smart Motion Sensor, R1 Motion Sensor, Smart Motion Sensor, Motion Sensor, Smart Sensor, Sensor |