StarTech CK4-D108C Secure 8 Port KVM Switch

• CK4-D102C 2-Port SH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D202C 2-Port DH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D104C 4-Port SH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D204C 4-Port DH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D404C 4-Port QH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D108C 8-Port SH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D208C 8-Port DH Secure Pro DVI KVM w/audio and CAC, PP 4.0
• CK4-D116C 16-Port SH Secure Pro DVI KVM w/audio and CAC, PP 4.0

INSTRUKSI PENGGUNAAN PRODUK

SPESIFIKASI TEKNIS

APA TEGESÉ BOX ING BASA INGGRIS?

FITUR KEAMANAN

ANTI-TAMPER SWITCHES
Saben model dilengkapi Anti-T internalamper switches, which sense attempts to open the device enclosure. Once the system identifies such an attempt, all the front panel LEDs will flash rapidly, the internal buzzers will beep, and the unit will become useless by shutting off connection with all attached PCs and peripherals, disabling any functionality.

TAMPER-EVIDENT SEAL
Enclosure unit dilindhungi karo ingampsegel er-bukti kanggo nyedhiyani bukti visual nuduhake yen unit wis dibukak.

FIRMWARE sing dilindhungi
Pengontrol unit kasebut nduweni fitur proteksi khusus sing nyegah reprogramming utawa maca perangkat kukuh.

Isolasi Dhuwur ing SALURAN USB
Opto-isolators digunakake ing unit supaya dalan data USB listrik diisolasi saka saben liyane, nyediakake isolasi dhuwur lan nyegah data bocor antarane bandar.

EMULASI EDID AMAN
The unit prevents unwanted and insecure data from transmitting through the DDC lines by means of secure EDID learning and emulation.

TEST DIRI
A self-test is performed each time the KVM is powered on as part of its boot-up sequence. If the KVM starts up correctly and is functional, the self-test has passed. However, if all Front Panel LEDs are on and not flashing, the power-up self-test has failed, and all functions are disabled. Check if any of the front panel port selection buttons are jammed. In this case, release the jammed button and recycle the power.

INSTALASI

SYARAT SISTEM

1. StarTech.com Secure PSS is compatible with standard personal/portable computers, servers, or thin clients, running operating systems such as Windows or Linux.
2. Piranti periferal sing didhukung KVM kapacak ing tabel ing ngisor iki:

INSTALASI (Lanjutan)

UNIT SINGLE-HEAD:

1. Priksa manawa daya dipateni utawa pedhot saka unit lan komputer.
2. Use a DVI cable to connect the DVI output port from each computer to the corresponding DVI IN ports of the unit.
3. Gunakake kabel USB (Tipe-A nganti Tipe-B) kanggo nyambungake port USB ing saben komputer menyang port USB unit kasebut.
4. Opsional, sambungake kabel audio stereo (3.5mm nganti 3.5mm) kanggo nyambungake output audio komputer menyang port AUDIO IN unit.
5. Connect a monitor to the DVI OUT console port of the unit using a DVI cable.
6. Sambungake keyboard lan mouse USB menyang rong port console USB.
7. Opsional, sambungake speaker stereo menyang port AUDIO OUT unit.
8. Optionally connect CAC (COMMON ACCESS CARD, SMART CARD READER) to the CAC port inthe user console interface.
9. Pungkasan, daya ing KVM kanthi nyambungake sumber daya 12VDC menyang konektor daya, banjur nguripake kabeh komputer.

Cathetan: Komputer sing disambungake menyang port 1 bakal tansah dipilih kanthi gawan sawise dipateni.
Cathetan: You can connect up to 2 computers to the 2-port KVM, up to 4 computers to the 4-port KVM, up to 8 computers to the 8-port KVM, and up to 16 computers to the 16-port KVM.

PÈNGET PENTING – Kanggo alasan keamanan:

• Produk iki ora ndhukung piranti nirkabel. Aja nyoba nggunakake keyboard nirkabel utawa mouse nirkabel karo produk iki.
• Produk iki ora ndhukung keyboard karo hub USB terpadu utawa port USB. Mung nganggo keyboard USB standar (HID) karo piranti iki.
• Produk iki ora ndhukung input audio mikropon utawa input baris. Aja nyambungake mikropon utawa headset karo mikropon menyang piranti iki.
• Connection of authentication devices (CAC) with external power sources is prohibited

INSTALASI (Lanjutan)

MULTI-KEPALA UNIT:

1. Priksa manawa daya dipateni utawa pedhot saka unit lan komputer.
2. Use DVI cables to connect the DVI output ports of each computer to the corresponding DVI IN ports of the unit. For example, if using CK4-D404C, the four DVI ports of one computer must all be connected to one channel.
   • The DVI IN connectors that belong to the same channel are arranged vertically.
3. Gunakake kabel USB (Tipe-A nganti Tipe-B) kanggo nyambungake port USB ing saben komputer menyang port USB unit kasebut.
4. Optionally nyambung kabel audio stereo (3.5mm ing loro ends) kanggo nyambungake output audio saka komputer menyang AUDIO IN bandar unit.
5. Sambungake monitor menyang port console DisplayPort OUT unit nggunakake kabel DisplayPort.
   • The DVI IN ports on one row will be switched to the DVI OUT of the same row.
6. Sambungake keyboard lan mouse USB ing rong port console USB.
7. Opsional, sambungake speaker stereo menyang port AUDIO OUT unit.
8. Optionally connect the CAC (smart card reader) to the CAC port in the user console interface.
9. Daya ing KVM kanthi nyambungake sumber daya 12VDC menyang konektor daya, lan banjur nguripake kabeh komputer.
   • Cathetan: Komputer sing disambungake menyang port 1 bakal tansah dipilih kanthi gawan sawise dipateni.

INSTALASI (Lanjutan)

INSTALASI (Lanjutan)

EDID sinau:
The KVM is designed to learn the connected monitor’s EDID upon power-up. In the event of connecting a new monitor to the KVM, a power recycle is required. The KVM will indicate to the user the EDID learn process by flashing the front panel’s LEDs. Port one green and push button blue LEDs will both begin to flash for about 10 seconds. When the LEDs stop flashing, the EDID learn process is done. If the KVM has more than one video board (such as dual-head and quad-head models), then the unit will continue to learn the EDIDs of the connected monitors and indicate the progress of the process by flashing the next port selection green and push button blue LED,s respectively. The monitor must be connected to the video output connector located in the console space at the back of the KVM during the EDID learn process.  If the read EDID from the connected monitor is identical to the current stored EDID in the KVM, then the EDID learn function will be skipped.

CAC (KARTU AKSES UMUM, PEMBACA KARTU SMART)
INSTALASI
The following steps are intended for the system administrator or IT manager only. If you have the optional CAC ports, there will be 2 ports on a 2-host ports KVM, 4 ports on a 4-host ports KVM, 8 ports on an 8-host ports KVM, and 16 ports on a 16-host ports KVM. CAC connection to the computer requires a USB cable connection separate from the keyboard and mouse. This allows the CAC to be connected independently from the keyboard and mouse. It also allows the user to select whether CAC for a certain computer is supported or not.

1. Priksa manawa daya dipateni utawa dicopot saka unit lan komputer.
2. Gunakake kabel USB (Tipe-A nganti Tipe-B) kanggo nyambungake port USB ing komputer menyang port USB CAC ing KVM. Aja nyambungake kabel USB yen fungsi CAC ora dibutuhake kanggo komputer kasebut.
3. Sambungake CAC (maca kertu pinter) menyang port CAC ing antarmuka console pangguna.
4. Daya ing KVM kanthi nyambungake sumber daya 12VDC menyang konektor daya, lan banjur nguripake kabeh komputer.
5. Kanggo mateni CAC kanggo saluran apa wae (kabeh port CAC diaktifake minangka standar), gunakake tombol panel ngarep kanggo ngalih KVM menyang saluran sing mode CAC sampeyan pengin diganti. Sawise saluran dipilih, tombol LED kanggo saluran tartamtu iki kudu urip (port CAC aktif). Pencet terus tombol nganti 3 detik nganti tombol LED mati. Port CAC saiki dipateni kanggo saluran iki.
6. To enable CAC for any channel, use the front panel buttons to switch the KVM to the channel whose CAC  mode you wish to change. Once the channel is selected, the button LED for this specific channel should be off (CAC port disabled). Press and hold the button for 3 seconds until the button LED turns on. The CAC port is now enabled for this channel. An active session on a computer is terminated upon removal of the CAC device.

Cathetan: Sesi mbukak bakal langsung mandheg nalika piranti CAC kadhaptar dibusak

KONFIGURASI PORT CAC
Langkah-langkah ing ngisor iki ditrapake kanggo administrator sistem lan operator (pangguna).

Cathetan: Only one computer connected to port 1 is required for this operation. CAC port Configuration is an optional feature, allowing registration of any USB peripheral to operate with the KVM. Only one peripheral can be registered, and only the registered peripheral will operate with the KVM. By default, when no peripheral is registered, the KVM will operate with any Smart Card Reader.

Konfigurasi CAC PORT VIA OPSI MENU Panganggo

1. Bukak Program Administrasi lan Manajemen Keamanan.
2. Nggunakake keyboard, pencet tombol Alt kaping pindho lan ketik "cnfg".
3. Ing stage, mouse disambungake menyang KVM bakal mandheg fungsi.
4. Ketik jeneng pangguna standar "pangguna" banjur pencet Ketik.
5. Ketik sandhi standar "12345" banjur pencet Ketik.
6. Pilih opsi 2 saka menu ing layar banjur pencet Ketik.
7. Sambungake piranti peripheral kanggo pangguna menyang port USB CAC ing sisih console KVM lan ngenteni nganti KVM maca informasi peripheral anyar.
8. KVM bakal nampilake informasi periferal sing disambungake ing layar lan buzz 3 kaping nalika registrasi rampung

AUDIT: Mbuwang Log Acara liwat Pilihan Menu Panganggo

Langkah-langkah ing ngisor iki ditrapake kanggo administrator sistem.
Cathetan: Only one computer connected to port 1 is required for this operation. The Event Log is a detailed report of critical activities stored in the KVM memory. A comprehensive feature list and guidance for Administration and Security Management Tools can be found in the Administrator’s Guide available for download from www.StarTech.com/support.

Kanggo view utawa mbucal Log Acara:

1. Bukak Program Administrasi lan Manajemen Keamanan.
2. Nggunakake keyboard, pencet tombol Alt kaping pindho lan ketik "cnfg".
3. Ketik jeneng admin standar "admin" banjur pencet Ketik.
4. Ketik sandhi standar "12345" banjur pencet Ketik.
5. Nyuwun Dump Log kanthi milih pilihan 5 ing menu. (Dituduhake ing Gambar 12-1)

* Waca Pandhuan Alat Manajemen lan Keamanan kanggo informasi rinci.

RESET: Mulihake Default Pabrik

Langkah-langkah ing ngisor iki ditrapake kanggo administrator sistem.
Cathetan: Mung siji komputer sing disambungake menyang port 1 sing dibutuhake kanggo operasi iki. Mulihake Default Pabrik bakal ngreset kabeh setelan ing KVM menyang negara asline.

• Registrasi port CAC bakal dibusak.
• Setelan KVM bakal direset menyang standar pabrik.

Kanggo mulihake Default Pabrik liwat Pilihan Menu Panganggo:

1. Bukak Program Administrasi lan Manajemen Keamanan.
2. Nggunakake keyboard, pencet tombol Alt kaping pindho lan ketik "cnfg".
3. Ketik jeneng admin standar "admin" banjur pencet Ketik.
4. Ketik sandhi standar "12345" banjur pencet Ketik.
5. Select option 7 from the menu on your screen and press Enter. (Menu shown in Figure 12-1)

* Waca Pandhuan Alat Manajemen lan Keamanan kanggo informasi rinci.

PILAKU LED

EDID Sinau - LED Panel Ngarep:
Kabeh LED diuripake kanggo 1 detik. banjur:

• Port 1 LED bakal sumunar nganti pungkasan proses.
• Port 2 LED bakal sumunar nganti pungkasan proses yen ana papan video kapindho (KVM dual-head).
• Port 3 LEDs will flash until the end of the process if a third video board exists (Quad-head KVM).
• Port 4 LEDs will flash until the end of the process if a fourth video board exists (Quad-head KVM).

PENTING!

• Yen kabeh LED Panel Ngarep sumunar lan buzzer muni, KVM wis TAMPERED with, and all functions are permanently disabled.
• Mangga kontak StarTech.com dhukungan teknis ing  www.StarTech.com/Contact.
• If all Front Panel LEDs are on and not flashing, the POWER UP SELF TEST has failedand all functions are disabled.
• Priksa manawa ana tombol pilihan port panel ngarep sing macet. Ing kasus iki, ngeculake tombol macet lan daur ulang daya.
• If pthe power-up self-test is still failing, please contact StarTech.com dhukungan teknis ing   www.StarTech.com/Contact.

OPERASI SISTEM

Kontrol PANEL FRONT
Kanggo ngalih menyang port input, mung pencet tombol input sing dikarepake ing panel ngarep KVM. Yen port input dipilih, LED port kasebut bakal urip. Sesi mbukak mandheg nalika ngalih menyang komputer liyane.

mecahaken masalah

ORA DAYA

• Priksa manawa adaptor daya wis disambungake kanthi aman menyang konektor daya unit.
• Priksa output voltage saka sumber daya lan priksa manawa voltage Nilai watara 12VDC.
• Ganti sumber daya.

Ora ana VIDEO

• Priksa manawa kabeh kabel video disambungake kanthi bener.
• Sambungake komputer langsung menyang monitor kanggo verifikasi manawa monitor lan komputer sampeyan bisa digunakake kanthi bener.
• Restart the computers.+

KEYBOARD ora bisa digunakake

• Priksa manawa keyboard wis disambungake kanthi bener menyang unit.
• Priksa manawa kabel USB sing nyambungake unit lan komputer wis disambungake kanthi bener.
• Try connecting the USB to the computer to a different port.
• Priksa manawa keyboard bisa digunakake nalika langsung nyambung menyang komputer.
• Ganti keyboard.

Cathetan: Indikator LED NUM, CAPS, lan SCROLL Lock ing keyboard ora bakal murup yen disambungake menyang KVM.

MOUSE ora bisa digunakake

• Priksa manawa mouse disambungake kanthi bener menyang unit kasebut.
• Try connecting the USB to the computer to a different port.
• Priksa manawa mouse bisa digunakake nalika langsung nyambung menyang komputer.
• Ganti mouse.

TANPA AUDIO

• Priksa manawa kabeh kabel audio disambungake kanthi bener.
• Sambungake speaker langsung menyang komputer kanggo verifikasi manawa speaker lan audio komputer bisa digunakake kanthi bener.
• Priksa setelan audio komputer lan verifikasi manawa output audio liwat speaker. NO CAC (KARTU AKSES UMUM, PEMBACA KARTU SMART)
• Priksa manawa kabel USB sing nyambungake unit lan komputer wis disambungake kanthi bener.
• Priksa manawa port CAC diaktifake.

Informasi Garansi
For information regarding the warranty of this product, please visit: www.StarTech.com/Warranty

WARTA
The information contained in this document is subject to change without notice. StarTech.com makes no warranty of any kind about this material, including but not limited to, implied warranties of merchantability and fitness for a particular purpose. StarTech.com will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from StarTech.com, Ltd.

FAQ

What Is EDID Learn And How Is It Triggered?

The EDID Learn process is triggered only during the KVM’s startup sequence. This behavior aligns with the NIAP 4.0 Protection Profile requirements, which restrict continuous EDID communication. Under this standard, the KVM may only receive EDID data from the monitor during initialization to minimize active data exchange between the monitor and the KVM, thereby enhancing isolation and overall device security. Ultimate fix: KVM reset.

Why Do Different Ports Have Different LED Colors?

The color-coded LEDs serve a security purpose by allowing users to clearly and visually confirm which computer is active before entering sensitive data. This feature reduces the risk of accidental data entry on the wrong system. (First: green, last: red, middle: orange.)

Does The KVM Work With Converters Or Adapters?

No, the use of converters or adapters is not recommended.

What Issues Does A KVM Reset Fix?

A reset can resolve video or EDID issues, CAC reader drops, or detection issues caused by a power outage.

Is The Software Utility Required?

No, but it is recommended to update the username and password during initial setup

Does The Software Utility Work On Operating Systems Other Than Windows?

Ora.

How Big Is The Log File Buffer?

FIFO – 100 entries.

Can The Time Zone Be Changed?

No, the default time zone is Pacific Time (USA).

Is There A Battery Internally?

ya wis.

Does the KVM Have Anti-Tamper Features?

ya wis

Can The Onboard Buzzer Be Disabled?

Ora.

Do Special Keys (Media Shortcut Keys) Work?

No, using them may cause unexpected behavior.

Dokumen / Sumber Daya

StarTech CK4-D108C Secure 8 Port Kvm Switch [pdf] Instruksi Manual CK4-D108C Secure 8 Port Kvm Switch, CK4-D108C, Secure 8 Port Kvm Switch, Secure 8 Port Kvm Switch, Secure 8 Port, Kvm Switch

Referensi

• Manual pangguna