Q-SYS inti Server inti

PETUNJUK KESELAMATAN PENTING

1. Waca pandhuan iki lan simpen salinan kanggo referensi ing mangsa ngarep. Tindakake kanthi ketat lan nggatekake kabeh instruksi lan peringatan. Instal piranti mung kaya sing diprentahake.
2. Aja nggunakake utawa nyelehake piranti iki ing utawa cedhak banyu utawa cairan.
3. Resik mung nganggo gombal garing. Aja nggunakake semprotan aerosol, pembersih, disinfektan utawa fumigan ing, cedhak, utawa menyang piranti.
4. Aja masang piranti ing cedhak sumber panas, kayata radiator, register panas, kompor, utawa piranti liyane (kalebu amppengangkat).
5. Refer all services to qualified personnel.
6. Mirsani kabeh kode lokal sing ditrapake. Hubungi insinyur profesional sing dilisensi nalika ngrancang instalasi peralatan kanggo mesthekake kepatuhan.

Maintenance lan Repair

WARNING!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To avoid the danger of subsequent damage to the apparatus, injuries to persons and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorised service station or an authorised QSC international distributor. QSC is not responsible for any injury, harm or related damages arising from any Failure of the customer, owner or user of the apparatus to facilitate those repairs.

Swaraview

The Q-SYS Server Core X20r represents the next generation of Q-SYS processing, pairing the Q-SYS OS with off-the-shelf, enterprise-grade IT server hardware from Dell to deliver a flexible and scalable audio, video, and control solution
for a vast range of applications. Server Core X20r is a fully networked, programmable AV&C processor that provides centralised processing for multiple spaces or zones while distributing network I/O where it’s most convenient.

Referensi

• Dell Server Hardware - Kanggo informasi tambahan babagan spesifikasi hardware, kepatuhan peraturan, utawa iDRAC, bukak server Dell websitus ing dell.com/servers.
• Q-SYS Specifications and Software — For additional information regarding the Q-SYS Server Core X20r, software feature specifications, Q-SYS Designer Software (QDS), and other Q-SYS products and solutions, visit qsys.com.
• Knowledge Base — Find answers to common questions, troubleshooting information, tips, and application notes. Link to support policies and resources, including Q-SYS Help, software and firmware, product documents, and training videos. Go to support.qsys.com.
• Dhukungan Pelanggan - Waca kaca Hubungi Kita ing Q-SYS websitus kanggo Dhukungan Teknis lan Layanan Pelanggan, kalebu nomer telpon lan jam operasi. Menyang qsys.com/contact-us.
• Warranty — For a copy of the QSC Limited Warranty, go to qsys.com/support/warranty-statement.

TD-001721-01-A

Fitur Panel Ngarep

PERHATIAN: The Front Panel is included separately in the box and must be installed to observe boot-up and status messages. After a power cycle, the LCDs are “Initialising” for approximately 1 minute. During this time, no other indicators or sounds are active. Total boot-up time after a power cycle is approximately 4 minutes (2-3 minutes for subsequent reboots), at which time the Server Core X20r is discoverable in QDS.

1. Indikator status lan ID - Diaktifake liwat Piranti Lunak Desainer Q-SYS
2. Kunci bezel
3. Bezel aktif sing bisa dicopot
4. tombol navigasi LCD
5. LCD - Nampilake jeneng prosesor Q-SYS Core, status, lan tandha kesehatan.
6. Tombol daya
7. USB port – Not supported
8. Informasi tag – Includes the product serial number and Q-SYS Support contact information
9. Q-SYS Media Drive – (Behind bezel) One 2.5-inch, 480 GB, SATA SSD drive. Additional drives are not supported.

Fitur Panel mburi

1. Komunikasi serial RS232 (lanang DE-9) - Kanggo sambungan menyang piranti serial
2. Port LAN on-board – Ora didhukung
3. Port LAN Q-SYS (RJ45, 1000 Mbps) – Saka kiwa menyang tengen: LAN A, LAN B, AUX A, AUX B
4. Dual redundant power supply units (PSUs) – 600W each
5. ID indicator – Enabled via Q-SYS Designer Software
6. Port USB - Ora didhukung
7. iDRAC dedicated port (RJ45) – For remote iDRAC access: Default IP = 192.168.0.120, Default username = root, Default password = calvin
8. Output video VGA (wadon HD15) – Ora didhukung

2025 QSC, LLC Kabeh hak dilindhungi undhang-undhang. QSC, logo QSC, Q-SYS, lan logo Q-SYS minangka merek dagang kadhaptar saka QSC, LLC ing Kantor Paten lan Merek Dagang AS lan negara liyane. Paten bisa ditrapake utawa ditundha. Kabeh merek dagang liyane minangka properti saka sing nduweni. qsys.com/patents qsys.com/trademarks.

Dokumen / Sumber Daya

Q-SYS Q-SYS inti Server inti [pdf] Pandhuan pangguna X20r, Inti Server Inti Q-SYS, Inti Server Inti Q-SYS, Inti Server Inti, Inti Server

Referensi

• Manual pangguna