novation LAUNCHKEY MK4 USB MIDI Keyboard Controller
Spesifikasi
- Jeneng produk: Launchkey MK4
- Versi: 3.0
- Komunikasi: MIDI liwat USB lan DIN
- Antarmuka MIDI: Rong pasangan input lan output MIDI liwat USB, port output MIDI DIN
Pandhuan Panggunaan
About the Launchkey Programmer’s Reference Guide
- This document provides all the information you need to be able to control the Launchkey.
- The Launchkey communicates using MIDI over USB and DIN. This document describes the MIDI implementation for the device, the MIDI events coming from it, and how the Launchkey’s various features can be accessed through MIDI messages.
We express MIDI data in this guide in a few ways:
- A gambaran Inggris kosong pesen.
- Nalika nerangake cathetan musik, C tengah dianggep minangka 'C3' utawa cathetan 60. Saluran MIDI 1 minangka saluran MIDI kanthi nomer paling sithik: saluran saka 1 nganti 16.
- Pesen MIDI uga ditulis ing data kosong, kanthi padha karo desimal lan heksadesimal. Nomer heksadesimal bakal tansah ngiring dening 'h' lan padha desimal diwenehi ing kurung. Kanggo example, cathetan ing pesen ing saluran 1 signified dening status byte 90h (144).
Entering Launchkey’s Bootloader
- Launchkey nduweni mode bootloader sing ngidini pangguna view versi FW saiki, lan ngaktifake / mateni Gampang Mulai. Bootloader diakses kanthi nyekel tombol Octave Up lan Octave Down bebarengan nalika nguripake piranti.
- Layar bakal nampilake nomer versi Aplikasi lan Bootloader saiki.
- Tombol Rekam bisa digunakake kanggo ngalih Gampang Mulai. Nalika Gampang Mulai ON, Launchkey katon minangka Piranti Panyimpenan Massal kanggo nyedhiyakake pengalaman pisanan sing luwih trep. Sampeyan bisa mateni iki yen sampeyan wis kenal karo piranti kanggo mateni Piranti Panyimpenan Massal iki.
- Tombol Puter bisa digunakake kanggo miwiti Aplikasi.
MIDI on Launchkey
- Launchkey nduweni rong antarmuka MIDI, nyedhiyakake rong pasang input lan output MIDI liwat USB. Padha kaya ing ngisor iki:
- MIDI In/Out (or first interface on Windows): This interface is used to receive MIDI from performing (keys, wheels, pad, pot, and fader Custom Modes); and is used to provide external MIDI input.
- DAW In/Out (or second interface on Windows): This interface is used by DAWs and similar software to interact with the Launchkey.
- Launchkey uga duwe port output MIDI DIN, sing ngirim data sing padha karo sing ditampa ing port host MIDI In (USB). Elinga yen iki ora kalebu respon kanggo panjalukan sing ditanggepi dening host menyang Launchkey on MIDI Out (USB).
- Yen sampeyan pengin nggunakake Launchkey minangka permukaan kontrol kanggo DAW (Digital Audio Workstation), sampeyan bakal pengin nggunakake antarmuka DAW (Waca Mode DAW [11]).
- Yen ora, sampeyan bisa sesambungan karo piranti nggunakake antarmuka MIDI.
- Launchkey ngirim Cathetan On (90h (144) - 9Fh (159)) kanthi kecepatan nol kanggo Note Off. Iku nampa salah siji Cathetan Offs (80h (128) - 8Fh (143)) utawa Cathetan Ons (90h (144) - 9Fh (159)) karo kacepetan nol kanggo Note Off.
Format pesen SysEx digunakake dening piranti
- Kabeh pesen SysEx diwiwiti kanthi header ing ngisor iki, preduli saka arah (Host → Launchkey utawa Launchkey → Host):
SKU Reguler:
Mini SKU:
- Sawise header minangka byte printah, pilih fungsi sing bakal digunakake, banjur data apa wae sing dibutuhake kanggo fungsi kasebut.
Launchkey Programmer’s Standalone (MIDI) mode
- The Launchkey daya munggah menyang mode Standalone. Mode iki ora nyedhiyakake fungsi tartamtu kanggo interaksi karo DAW, antarmuka DAW mlebu / metu (USB) tetep ora digunakake kanggo tujuan iki. Nanging, kanggo nyedhiyakake sarana kanggo njupuk acara ing tombol kontrol DAW Launchkey, dheweke ngirim acara Ganti Kontrol MIDI ing Saluran 16 (status MIDI: BFh, 191) ing antarmuka MIDI mlebu / metu (USB) lan port MIDI DIN:
Gambar 1. Desimal:
Gambar 2. Heksadesimal:
- Tombol Start lan Stop (Mulai lan Shift + Start ing Launchkey Mini SKUs) ngasilake pesen MIDI Real Time Start lan Stop.
- Nalika nggawe Mode Kustom kanggo Launchkey, elinga yen sampeyan nyetel kontrol supaya bisa digunakake ing Saluran MIDI 16.
Launchkey Programmer’s DAW mode
- mode DAW menehi DAWs lan DAW-kaya fungsi lunak kanggo mujudake antarmuka panganggo intuisi ing lumahing Launchkey kang. Kapabilitas sing diterangake ing bab iki mung kasedhiya yen mode DAW diaktifake.
- Kabeh fungsi sing diterangake ing bab iki bisa diakses liwat antarmuka DAW In/Out (USB).
kontrol mode DAW
- Aktifake Mode DAW:
- Pateni Mode DAW:
- When the DAW or DAW-like software recognises the Launchkey and connects to it, it should first enter DAW mode (send 9Fh 0Ch 7Fh), and then, if necessary, enable the feature controls (see the “Launchkey MK4 feature controls” section of this document).
- Nalika piranti lunak DAW utawa DAW-kaya metu, kudu metu saka mode DAW ing Launchkey (kirim 9Fh 0Ch 00h) kanggo bali menyang mode Standalone (MIDI).
Lumahing ing mode DAW
Ing mode DAW, beda karo mode mandiri (MIDI), kabeh tombol, lan unsur permukaan sing ora kalebu fitur kinerja (kayata Mode Kustom) bisa diakses lan bakal dilaporake mung ing antarmuka DAW In/Out (USB). Tombol kajaba sing ana ing Faders dipetakan kanggo Ngontrol acara Ganti kaya ing ngisor iki:
- Gambar 3. Desimal:
- Gambar 4. Heksadesimal:
- Indeks Control Change kadhaptar uga digunakake kanggo ngirim werna kanggo LED cocog (yen tombol wis sembarang), ndeleng Coloring lumahing [14].
Mode tambahan kasedhiya ing mode DAW
- Sawise ing mode DAW, mode tambahan ing ngisor iki kasedhiya:
- Mode DAW ing bantalan.
- Plugin, Mixer, Kirim & Transport ing encoders.
- Volume ing faders (Launchkey 49/61 mung).
- Nalika ngetik mode DAW, permukaan disetel kanthi cara ing ngisor iki:
- Pads: DAW.
- Encoders: Plugin.
- Faders: Volume (Launchkey 49/61 only).
- DAW kudu miwiti saben wilayah kasebut.
Laporan mode banjur pilih
- Mode bantalan, encoder, lan fader bisa dikontrol dening acara MIDI lan dilaporake maneh dening Launchkey nalika ngganti mode amarga aktivitas pangguna. Pesen kasebut penting kanggo dijupuk, amarga DAW kudu ngetutake nalika nyetel lan nggunakake permukaan kaya sing dikarepake adhedhasar mode sing dipilih.
Mode pad
- Owah-owahan mode Pad dilaporake utawa bisa diganti dening acara MIDI ing ngisor iki:
- Saluran 7 (status MIDI: B6h, 182), Ganti Kontrol 1Dh (29)
- Mode Pad dipetakan menyang nilai ing ngisor iki:
- 01h (1): tata letak drum
- 0Fh (15): DAW Drum layout
- 02h (2): tata letak DAW
- 04h (4): User Chord
- 05h (5): Mode Kustom 1
- 06h (6): Mode Kustom 2
- 07h (7): Mode Kustom 3
- 08h (8): Mode Kustom 4
- 0Dh (13): Pola Arp
- 0Eh (14): Peta Chord
Mode encoder
- Owah-owahan mode encoder dilaporake utawa bisa diganti dening acara MIDI ing ngisor iki:
- Saluran 7 (status MIDI: B6h, 182), Ganti Kontrol 1Eh (30)
- Mode encoder dipetakan menyang nilai ing ngisor iki:
- 01h (1): Mixer
- 02h (2): Plugin
- 04h (4): Ngirim
- 05h (5): Transportasi
- 06h (6): Mode Kustom 1
- 07h (7): Mode Kustom 2
- 08h (8): Mode Kustom 3
- 09h (9): Mode Kustom 4
Mode fader (Mung tombol Bukak 49/61)
- Owah-owahan mode fader dilaporake utawa bisa diganti dening acara MIDI ing ngisor iki:
- Saluran 7 (status MIDI: B6h, 182), Ganti Kontrol 1Fh (31)
- Mode fader dipetakan menyang nilai ing ngisor iki:
- 01h (1): Volume
- 06h (6): Mode Kustom 1
- 07h (7): Mode Kustom 2
- 08h (8): Mode Kustom 3
- 09h (9): Mode Kustom 4
modus DAW
- Mode DAW ing bantalan dipilih nalika ngetik mode DAW, lan nalika pangguna milih kanthi menu Shift. Bantalan laporan bali minangka cathetan (status MIDI: 90h, 144) lan aftertouch (status MIDI: A0h, 160) acara (sing terakhir mung yen Polyphonic Aftertouch dipilih) ing Channel 1, lan bisa diakses kanggo pewarnaan LED ing ngisor iki. indeks:
Drum mode(s)
- The DAW Drum mode on pads can replace the Drum mode of standalone (MIDI) mode, providing a capability to the DAW to control its colours and receive the messages on the DAW MIDI port. This is done by sending the below message:
- Mode drum bisa bali menyang operasi mandiri kanthi pesen ing ngisor iki:
- The pads report back as note (MIDI status: 99h, 153) and Aftertouch (MIDI status: A9h, 169) events (the latter only if Polyphonic Aftertouch is selected) on Channel 10, and can be accessed for colouring their LEDs (see “Colouring the Surface [14]”) by the following indices:
Mode encoder
Mode Absolute
- Enkoder ing mode ing ngisor iki nyedhiyakake owah-owahan Kontrol sing padha ing Saluran 16 (status MIDI: BFh, 191):
- Plugin
- Pengaduk
- Ngirim
- Indeks Pangowahan Kontrol sing kasedhiya kaya ing ngisor iki:
- Yen DAW ngirim informasi posisi, dheweke bakal milih kanthi otomatis.
Mode Relatif
- Mode Transportasi nggunakake mode output relatif kanthi Owah-owahan Kontrol ing Saluran 16 ing ngisor iki (status MIDI: BFh, 191):
- Ing mode Relatif, nilai poros yaiku 40h(64) (ora ana gerakan). Nilai ing ndhuwur pivot point encode obahe searah jarum jam. Nilai ing ngisor pivot point encode obahe berlawanan arah jarum jam. Kanggo example, 41h (65) cocog karo 1 langkah searah jarum jam lan 3Fh (63) cocog karo 1 langkah searah jarum jam.
- Yen acara Tutul Kontrol Terus-terusan diaktifake, Tutul On dikirim minangka acara Ganti Kontrol kanthi Nilai 127 ing Saluran 15, dene Tutul Mati dikirim minangka acara Ganti Kontrol kanthi Nilai 0 ing Saluran 15.ample, Pot paling kiwa bakal ngirim BEh 55h 7Fh kanggo Tutul On, lan BEh 55h 00h kanggo Tutul Off.
Mode fader (Mung tombol Bukak 49/61)
- Fader, ing mode Volume, nyedhiyakake owah-owahan Kontrol ing Saluran 16 ing ngisor iki (status MIDI: BFh, 191):
- Yen acara Tutul Kontrol Terus-terusan diaktifake, Tutul On dikirim minangka acara Ganti Kontrol kanthi Nilai 127 ing Saluran 15, dene Tutul Mati dikirim minangka acara Ganti Kontrol kanthi Nilai 0 ing Saluran 15.ample, Fader paling kiwa bakal ngirim BEh 05h 7Fh kanggo Tutul On, lan BEh 05h 00h kanggo Tutul Off.
Mewarnai permukaan
- Kanggo kabeh kontrol kajaba mode Drum, cathetan, utawa pangowahan kontrol sing cocog karo sing diterangake ing laporan bisa dikirim kanggo menehi warna LED sing cocog (yen ana kontrol) ing saluran ing ngisor iki:
- Saluran 1: Setel werna stasioner.
- Saluran 2: Setel werna sumunar.
- Saluran 3: Setel warna pulsing.
- Kanggo mode Drum ing Pads, Sawise DAW wis ngontrol mode [12], saluran ing ngisor iki ditrapake:
- Saluran 10: Setel werna stasioner.
- Saluran 11: Setel werna sumunar.
- Saluran 12: Setel warna pulsing.
- The colour is selected from the colour palette by the note event’s Velocity or the control change’s value.
- Monochrome LEDs can have their brightness set using a CC on channel 4, the CC number is the LED index, the value is the brightness.
- contone
Palet warna
- Nalika nyedhiyakake warna kanthi cathetan MIDI utawa owah-owahan kontrol, warna kasebut dipilih miturut tabel desimal ing ngisor iki:
- Tabel sing padha karo indeksasi heksadesimal:
Warna sumunar
- When sending flashing colour, the colour flashes between that set as static or pulsing colour (A), and that contained in the MIDI event setting flashing (B), at 50% duty cycle, synchronised to the MIDI beat clock (or 120bpm or the last clock if no clock is provided). One period is one beat long.
Warna pulsa
- Pulsa warna antarane intensitas peteng lan lengkap, disinkronake menyang jam beat MIDI (utawa 120bpm utawa jam pungkasan yen ora ana jam). Siji periode dawane rong ketukan, nggunakake wangun gelombang ing ngisor iki:
Warna RGB
- Pads and fader buttons can also be set to a custom colour using the following SysEx
SKU Reguler:
Mini SKU:
Ngontrol layar
Konsep
- Tampilan stasioner: Tampilan gawan sing ditampilake kajaba ana acara sing mbutuhake tampilan sing beda kanggo sementara ditampilake ing ndhuwur.
- Tampilan sauntara: Tampilan sing dipicu dening acara, tetep nganti suwene setelan pangguna wektu entek tampilan.
- Jeneng parameter: Digunakake ing asosiasi karo kontrol, nuduhake apa iku kontrol. Kajaba diwenehake dening pesen (SysEx), biasane iki minangka entitas MIDI (kayata cathetan utawa CC).
- Nilai parameter: Digunakake ing asosiasi karo kontrol, nuduhake nilai saiki. Kajaba diwenehake dening pesen (SysEx), iki minangka nilai mentah saka entitas MIDI sing dikontrol (kayata nomer ing kisaran 0 - 127 ing kasus CC 7 bit).
Ngatur tampilan
SKU Reguler:
Mini SKU:
- Sawise tampilan dikonfigurasi kanggo target tartamtu, iku bisa micu.
Sasaran
- 00h (0) – 1Fh (31): Temp. tampilan kanggo kontrol Analog (padha karo indeks CC, 05h-0Dh: Faders, 15h-1Ch: encoders)
- 20h (32): Tampilan stasioner
- 21h (33): Tampilan sauntara global (bisa digunakake kanggo apa wae sing ora ana hubungane karo kontrol Analog)
- 22h (34): Jeneng mode DAW pad sing ditampilake (Bidang 0, kosong: standar)
- 23h (35): Jeneng mode DAW Drum pad sing ditampilake (Bidang 0, kosong: standar)
- 24h (36): Jeneng mode encoder mixer ditampilake (Bidang 0, kosong: standar)
- 25h (37): Jeneng mode encoder plugin sing ditampilake (Bidang 0, kosong: standar)
- 26h (38): Ngirim jeneng sing ditampilake mode encoder (Bidang 0, kosong: standar)
- 27h (39): Jeneng mode encoder transportasi sing ditampilake (Bidang 0, kosong: standar)
- 28h (40): Jeneng mode fader volume sing ditampilake (Bidang 0, kosong: standar)
Konfigurasi
- Ing byte nyetel susunan lan operasi tampilan. 00h lan 7Fh sing nilai khusus: Iku cancels (00h) utawa ndadekke munggah (7Fh) tampilan karo isi saiki (minangka MIDI Event, iku cara kompak kanggo micu tampilan).
- Bit 6: Allow Launchkey kanggo ngasilake Temp. Tampilake kanthi otomatis ing Ganti (standar: Setel).
- Bit 5: Allow Launchkey kanggo ngasilake Temp. Tampilake kanthi otomatis ing Tutul (standar: Setel; iki Shift + rotate).
- Bit 0-4: Ngatur tampilan
- Tatanan tampilan:
- 0: Nilai khusus kanggo mbatalake tampilan.
- 1-30: ID Arrangement, ndeleng tabel ing ngisor iki.
- 31: Nilai khusus kanggo tampilan pemicu.
CATETAN
- The arrangement is ignored for targets only setting names (22h(34) – 28h(40)), however for changing triggerability, it needs to be set non-zero (since the value 0 for these still acts for cancelling the display).
Setelan teks
- Sawise tampilan dikonfigurasi, pesen ing ngisor iki bisa digunakake kanggo ngisi kolom teks.
SKU Reguler:
Mini SKU:
- Teks kasebut nggunakake pemetaan karakter ASCII standar ing sawetara 20h (32) - 7Eh (126) kanthi tambahan kode kontrol ing ngisor iki, sing wis ditugasake maneh kanggo nyedhiyakake karakter non-ASCII tambahan.
- Kotak Kosong – 1Bh (27)
- Kothak Isi - 1Ch (28)
- Simbol Datar – 1Dh (29)
- Jantung – 1Eh (30)
- Karakter kontrol liyane ora kudu digunakake amarga prilaku bisa diganti ing mangsa ngarep.
Bitmap
- Layar uga bisa nampilake grafis khusus kanthi ngirim bitmap menyang piranti.
SKU Reguler:
Mini SKU:
- The <target> can be either the Stationary display (20h(32)) or the Global temporary display
- (21h(33)). There is no effect on other targets.
- The <bitmap_data> is of fixed 1216 bytes, 19 bytes for each pixel row, for a total of 64 rows
- (19 × 64 = 1216). The 7 bits of the SysEx byte encode pixels from left to right (highest bit corresponding to the leftmost pixel), the 19 bytes covering the 128 pixels width of the display (with five unused bits in the last byte).
- Sawise sukses, ana respon kanggo pesen iki, sing cocog kanggo animasi cairan wektu (sawise nampa, Launchkey siap nampa pesen Bitmap sabanjure):
SKU Reguler:
Mini SKU:
- Tampilan kasebut bisa dibatalake kanthi mbatalake kanthi jelas (nggunakake Konfigurasi Tampilan SysEx utawa Acara MIDI), utawa micu tampilan normal (parametere disimpen nalika bitmap ditampilake).
CATETAN
- Firmware mung bisa nyimpen siji bitmap ing memori bebarengan.
Launchkey feature controls
- Many of the Launchkey’s features can be controlled by MIDI CC messages sent to the Launchkey’s DAW in port on channel 7 and queried by sending the same message to channel 8. Reply messages confirming changes or answering queries will always be sent on channel 7.
- Kanggo ngaktifake utawa mateni kontrol kasebut ing mode mandiri, gunakake pesen ing ngisor iki.
Aktifake kontrol fitur:
Pateni kontrol fitur:
CATETAN
- Ing mode DAW, kabeh kontrol fitur dirungokake, nanging ora bakal ngirim balesan konfirmasi kajaba sawetara sing penting.
- Ing mode DAW, pesen ing ndhuwur bisa digunakake kanggo nguripake kabeh utawa bali menyang set DAW.
- The CC messages must be sent to the Launchkey’s DAW in MIDI port.
- Kontrol Nibble-Split nggunakake nibble paling ora signifikan saka rong nilai CC kanggo nggawe nilai 8-bit. Nilai CCs pisanan dadi nibble paling pinunjul.
- Fitur sing ditandhani karo (*) ora molah malih, tetep ing siklus daya.
- Fitur sing ditandhani karo (#) tansah diaktifake kanthi lengkap ing mode DAW.
| Nomer CC | Fitur | Kontrol Jinis | |
| Hex | desimal | ||
| 02h:22h | (2:34) | Swing Arp | 2’s complement signed 14 bits percentage |
| 03h:23h | (3:35) | Kontrol tempo | |
| 04h: 24h | (4:36) | Pola irama nyimpang Arp | nibble-split bitmask |
| 05h: 25h | (5:37) | Ikatan Arp | nibble-split bitmask |
| 06h: 26h | (6:38) | Aksen Arp | nibble-split bitmask |
| 07h: 27h | (7:39) | Arp Ratchets | nibble-split bitmask |
| 1Dh (#) | (29) (#) | Pads layout pilih | |
| 1 Eh (#) | (30) (#) | Pilih tata letak Encoder | |
| 1Fh (#) | (31) (#) | Tata letak faders pilih | |
| 3K | (6) | Pilih prilaku skala | |
| 3Dh (#) | (61) (#) | Skala tonik (root note) pilih | |
| 3 Eh (#) | (62) (#) | Mode skala (jinis) pilih | |
| 3Fh (#) | (63) (#) | Ngalih | |
| 44h | (68) | DAW 14-bit output Analog | On / Off |
| 45h | (69) | DAW Encoder output Relatif | On / Off |
| 46h | (70) | DAW Fader Pickup | On / Off |
| 47h | (71) | acara DAW Tutul | On / Off |
| 49h | (73) | Arp | On / Off |
| 4 Ah | (74) | Mode skala | On / Off |
| 4K | (76) | Pangalihan cathetan Kinerja DAW (Nalika Aktif, cathetan Keybed menyang DAW) | On / Off |
| 4Dh | (77) | Zona Keyboard, mode | 0: Part A, 1: Part B, 2: Split, 3: Layer |
| 4eh | (78) | Zona Keyboard, tombol pamisah | cathetan MIDI ing keybed oktaf standar |
| 4Fh (*) | (79) (*) | Zona Keyboard, pilih sambungan Arp | 0: Bagian A, 1: Bagian B |
| 53h | (83) | DAW Drumrack warna aktif | |
| 54h | (84) | DAW Drumrack On / Off (When Off, Drumrack remains in MIDI mode while in DAW mode) | |
| 55h | (85) | Tipe Arp (Up / Down etc.) | |
| 56h | (86) | Tingkat Arp (kalebu Triplets) | |
| 57h | (87) | Arp Octave | |
| 58h | (88) | Arp Latch | On / Off |
| 59h | (89) | Arp Gate dawa | persentage |
| 5 Ah | (90) | Arp Gate minimal | milidetik |
| 5K | (92) | Arp Mutate | |
| 64 jam (*) | (100) (*) | MIDI Channel, Part A (or Keybed MIDI Channel for SKUs not having keyboard split) | 0–15 |
| 65 jam (*) | (101) (*) | Saluran MIDI, Bagian B (mung digunakake ing SKU sing duwe pamisah keyboard) | 0–15 |
| 66 jam (*) | (102) (*) | Saluran MIDI, Chords | 0–15 |
| 67 jam (*) | (103) (*) | Saluran MIDI, Drum | 0–15 |
| 68 jam (*) | (104) (*) | Kurva kecepatan tombol / Pilih kacepetan tetep | |
| 69 jam (*) | (105) (*) | Kurva kecepatan bantalan / Pilih kacepetan tetep | |
| 6 Ah (*) | (106) (*) | Nilai kacepetan tetep | |
| 6Bh (*) | (107) (*) | Arp velocity (whether Arp should take velocity from its note input or use fixed velocity) | |
| 6Ch (*) | (108) (*) | Tipe aftertouch pad | |
| 6Dh (*) | (109) (*) | Ambang aftertouch pad | |
| 6 Eh (*) | (110) (*) | Output Jam MIDI | On / Off |
| 6Fh (*) | (111) (*) | tingkat padhang LED | (0–127 where 0 is min, 127 is max) |
| 70 jam (*) | (112) (*) | Tingkat padhange layar | (0–127 where 0 is min, 127 is max) |
| 71 jam (*) | (113) (*) | Wektu tampilan sementara | Unit 1/10 detik, minimal 1 detik ing 0. |
| 72 jam (*) | (114) (*) | Mode Vegas | On / Off |
| 73 jam (*) | (115) (*) | Umpan Balik njaba | On / Off |
| 74 jam (*) | (116) (*) | Pads daya-on standar mode pilih | |
| 75 jam (*) | (117) (*) | Pot daya-on standar pilih mode | |
| 76 jam (*) | (118) (*) | Faders daya ing mode standar pilih | |
| 77 jam (*) | (119) (*) | Custom Mode Fader Pick-up | 0: Langsung, 1: Pickup |
| 7 Ah | (122) | Chord Map setelan Adventure | 1–5 |
| 7Bh | (123) | Chord Map Explore setelan | 1–8 |
| 7K | (124) | Setelan Panyebaran Peta Chord | 0–2 |
| 7Dh | (125) | Setelan Roll Peta Chord | 0–100 milliseconds |
Pitakonan
Q: How do I switch between Standalone mode and DAW mode on the Launchkey?
A: To switch between Standalone (MIDI) mode and DAW mode, refer to the specific instructions provided in the user manual. Typically, Standalone mode is the default upon powering up the Launchkey.
Q: Can I use the Launchkey's MIDI interfaces simultaneously?
A: Yes, you can use both the USB and DIN MIDI interfaces on the Launchkey simultaneously for communication purposes.
Dokumen / Sumber Daya
 |
novation LAUNCHKEY MK4 USB MIDI Keyboard Controller [pdf] Pandhuan pangguna LAUNCHKEY MK4, LAUNCHKEY MK4 USB MIDI Keyboard Controller, USB MIDI Keyboard Controller, MIDI Keyboard Controller, Keyboard Controller |