Montage Manual Pamilik Sensor Deteksi Objek MC25

Sensor Deteksi Obyek MC25

1. Abstrak

Ing Montage Object Detection Sensor is a stand-alone Time of Flight Volumetric Sensor with
advanced hardware and firmware features. It is designed around an advanced Time of Flight
imager chip. The system detects the presence or absence of cargo inside a container or a trailer
and communicates data collected to a gateway over Bluetooth. It is mounted on the inside
ceiling of a trailer and powered from an external 12VDC power source. By looking down from
the ceiling, it senses the presence of cargo on the floor of the trailer.

Spesifikasi  

1. Mekanikal 
1.1  Dimensions  Sensor Blok  Rectangular 107 x 52 x 25.4 mm
1.2  Dimensi Daya Sumber  Cable with 12VDC on a customized 4 pin connector Connector. Power can be from a  battery and joined with other units within the trailer 
1.3  Lokasi Instalasi  Sensor (shown by red arrow) will be attached to the EB and look down unobstructed to the floor.  

The sensor will be mounted to the ceiling, centered between the walls. The mount will be no more than 4” below the ceiling, connected by cables down the center of the ceiling to the Energous Bridge (EB, shown by yellow oval). 

jembatan

1.4  omah  Bahan  Product: Molded Valox FR Resin V3900WX Polycarbonate + PBT 
1.5  omah warna  Putih 

 

1.6  Pemasangan  x4 Internal Rivets or sheet metal screws. Installation from inside.  

Needs to be with 2” of roof center and have < 2-degree tilt relative  to the floor. Tilt and compensation for being off center can be  

adjusted with angle Alignment Plates underneath the housing  

sak soyo tambah. 

1.7  Rating IP  IP67 rated water resistant housing to ensure device can withstand fine dust and  protection from condensing humidity within the reefer. 

 

 
1.8  Suhu operasi  -20˚C to +60˚C (-4˚F to 140˚F) 
1.9  Rating Flammability  UL 94 V-0 
2. Desain 
2.1  Bluetooth ® Antenna  Internal antenna positioned inside the Sensor enclosure for good  reception. 
2.2  Trailer Ambient  

Suhu 

Temperature sensor to measure the trailer internal ambient  conditions is placed near the connector for thermal conduction. 
2.3  Shock & Vibration Rating  U.S. Military Standards 202G and 810F, SAE  

J1455 

2.4  EMC/EMI  SAE J1113; FCC-Part 15B Industri  

Kanada 

3. Laser lan Optik 
3.1  Tukang gambar  FPA = 8×8 piksel (emisi VCSEL)  

Resolution of up to 64 points 

3.2  Range Operasi  9' 
3.3  Kondisi Operasi  Kanggo panggunaan njero ruangan mung 
4. Sumber Daya 
4.1  Source-1  12VDC power source power range (up to 24Vnom, 32V limit),  resettable fuses, watchdog timer.
4.2  Kapasitas baterei  Baterei onboard 800mAh 
5. Elektronika 
5.1  CPU utama  NORDIC nRF52840 kanthi Kapabilitas OTA DFU 
5.2  Bluetooth ® SoC  NORDIC nRF52840 kanthi Kapabilitas OTA DFU 
5.3  Bluetooth ® Radio Front  End Amppanguripan  +18 dBm 

 

6. Konektivitas 
Bluetooth ® 
6.1  Konektivitas Nirkabel  Pairs nearby Bluetooth Gateway through a defined  

communication structure in both data through BLE advertisement  and connection profiles 

6.2  Versi  Bluetooth Low Energy BLE 5.0 
6.3  Daya Transmisi  -20dBm nganti +8dBm  

Selectable through Firmware 

7. Sertifikasi 
7.1  FCC  Product shall comply with all applicable wireless standards/rules 
7.2  UL / CE  ya wis 
7.3  RoHS  Product shall be RoHS compliant and not have any known-harmful materials or substances on any external surface 
7.4  Safety Mripat  Kelas-1 

3 Gambar produk 

4 Instalasi Example  

fase

Peraturan FCC  

Piranti iki tundhuk karo bagean 15 saka Aturan FCC. Operasi tundhuk karo rong syarat ing ngisor iki:  

(1) Piranti iki bisa uga ora nimbulaké gangguan mbebayani, lan  

(2) piranti iki kudu nampa gangguan sing ditampa, kalebu gangguan sing bisa nyebabake operasi sing ora dikarepake.  

Peralatan iki wis dites lan ditemokake tundhuk karo watesan kanggo piranti digital Kelas B, miturut bagean 15 Aturan FCC. Watesan kasebut dirancang kanggo menehi pangayoman sing cukup marang gangguan sing mbebayani ing instalasi omah. Peralatan iki ngasilake, nggunakake lan bisa mancarake energi frekuensi radio lan, yen ora dipasang lan digunakake miturut pandhuane, bisa nyebabake gangguan sing mbebayani kanggo komunikasi radio. Nanging, ora ana jaminan manawa gangguan ora bakal kedadeyan ing instalasi tartamtu. Yen peralatan iki nyebabake gangguan sing mbebayani kanggo panrima radio utawa televisi, sing bisa ditemtokake kanthi mateni lan nguripake peralatan kasebut, pangguna dianjurake kanggo nyoba mbenerake gangguan kasebut kanthi siji utawa luwih saka langkah-langkah ing ngisor iki:  

Reorient utawa pindhah antena panampa.  

Tambah pamisahan antarane peralatan lan panrima. 

Sambungake peralatan menyang stopkontak ing sirkuit beda saka sing panrima disambungake.  

Hubungi dealer utawa teknisi radio/TV sing berpengalaman kanggo njaluk bantuan.  

Owah-owahan utawa modifikasi sing ora disetujoni kanthi jelas dening pabrikan bisa ngilangi wewenang pangguna kanggo ngoperasikake peralatan kasebut. 

 V 1.4 [3-14-2025]   

Pranyatan Paparan Radiasi FCC RF  

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled  environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable  to only Mobile Configurations. The antennas used for the transmitter must be installed to  provide a separation distance of at least 20cm from all persons and must not be co-located or  operating in conjunction with any other antenna or transmitter. 

5 saka 5 

Dokumen / Sumber Daya

Montage Sensor Deteksi Obyek MC25 [pdf] Manual Pamilik
2BLQ4-MC25, 2BLQ4MC25, mc25, MC25 Sensor Deteksi Objek, MC25, Sensor Deteksi Objek, Sensor Deteksi, Sensor

Referensi

Ninggalake komentar

Alamat email sampeyan ora bakal diterbitake. Kolom sing dibutuhake ditandhani *