Isine ndhelikake
1 microsonic 10040157 Mic + Sensor Ultrasonik karo Output Ngoper siji
2 Model
3 katrangan produk
4 Pandhuan penting kanggo perakitan lan aplikasi
5 instruksi Majelis
6 Pangopènan
7 Setel paramèter sensor kanthi numerik kanthi nggunakake tampilan LED utawa nganggo prosedur Teach-in
8 Kunci kunci lan setelan pabrik
9 Fungsi tambahan sing migunani ing menu Add-on (mung kanggo pangguna sing berpengalaman, setelan ora dibutuhake kanggo aplikasi standar)
10 data teknis
11 mic+25
12 mic+35
13 mic+130
14 mic+340
15 mic+600
16 Dokumen / Sumber Daya
16.1 Referensi
17 Kiriman sing gegandhengan

microsonic-logo

microsonic 10040157 Mic + Sensor Ultrasonik karo Output Ngoper siji

microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-image

Model

  • mic+25/D/TC mic+25/E/TC
  • mic+35/D/TC mic+35/E/TC
  • mic+130/D/TC mic+130/E/TC
  • mic+340/D/TC mic+340E/TC
  • mic+600/D/TC mic+600/E/TC

katrangan produk

  • Sensor mic + karo siji switching out-put nawakake pangukuran non-kontak jarak menyang obyek. Gumantung ing jarak deteksi diatur output switch-ing disetel.
  • Kabeh setelan rampung karo rong tombol push lan tampilan LED telung digit (Tutul-Control).
  • Dioda pemancar cahya (LED telung warna) nuduhake status ngoper.
  • Fungsi output bisa diganti saka NOC dadi NCC.
  • Sensor bisa diatur kanthi manual nggunakake tampilan LED numerik utawa bisa uga dilatih liwat prosedur Teach-in.
  • Fungsi tambahan sing migunani disetel ing menu Add-on.
  • Nggunakake adaptor LinkControl (aksesori opsional) kabeh TouchControl lan setelan parameter sensor tambahan bisa digawe dening piranti lunak Windows.

Pandhuan penting kanggo perakitan lan aplikasi

Kabeh langkah sing cocog karo safety karyawan lan pabrik kudu ditindakake sadurunge perakitan, wiwitan, utawa pangopènan (pirsani manual operasi kanggo kabeh pabrik lan instruksi operator pabrik).
Sensor kasebut ora dianggep minangka peralatan safety lan bisa uga ora digunakake kanggo njamin safety manungsa utawa mesin! Sensor mic + nuduhake zona wuta, ing ngendi jarak ora bisa diukur. Ing sawetara operasi nuduhake kadohan saka sensor sing bisa Applied karo normal re-flectors karo cadangan fungsi cekap. Nalika nggunakake reflektor sing apik, kayata permukaan banyu sing tenang, sensor uga bisa digunakake nganti jangkauan maksimal. Obyek sing nyerep banget (umpamane busa plastik) utawa nyebar swara (umpamane watu kerikil) uga bisa nyuda jangkauan operasi sing ditemtokake.

Sinkronisasi
Yen jarak perakitan ditampilake ing fig.1 kanggo loro utawa luwih sensor ngluwihi sinkronisasi terpadu kudu digunakake. Sambungake saluran Sync / Com (pin 5) kabeh sensor (10 maksimum).microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-1

Jarak perakitan minimal tanpa
sinkronisasi utawa mode multiplex.

Mode Multiplex
Add-on-menu ngidini nemtokake alamat individu »01« nganti »10« kanggo saben sensor sing disambungake liwat Sync/Com-channel (pin 5). Sensor nindakake pangukuran ultrasonik kanthi urutan saka alamat sing kurang nganti dhuwur. Mulane, pengaruh apa wae ing antarane sensor ditolak. Alamat »00« dilindhungi undhang-undhang kanggo mode sinkronisasi lan mateni mode multiplex. (Kanggo nggunakake mode sing disinkronake kabeh sensor kudu disetel menyang alamat »00«.)

instruksi Majelis

  • Pasang sensor ing lokasi instalasi.
  • Pasang kabel konektor menyang konektor M12.

microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-2

Pin assignment karo view menyang plug sensor lan kode werna saka kabel sambungan microsonic.

wiwitan
sensor mic + dikirim menyang pabrik kanthi setelan ing ngisor iki:

  • Ngalih output ing NOC
  • Ndeteksi jarak ing sawetara operasi
  • Range pangukuran disetel menyang kisaran maksimum.

Setel paramèter sensor kanthi manual utawa gunakake prosedur Teach-in kanggo nyetel titik ngoper. microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-3

Kontrol Tutul

Pangopènan

mic + sensor bisa pangopènan free. Jumlah cilik saka rereget ing lumahing ora pengaruh fungsi. Lapisan rereget lan rereget sing kandel mengaruhi fungsi sensor lan mulane kudu dicopot.

Cathetan

  • mic + sensor duwe kompensasi suhu internal. Amarga sensor dadi panas dhewe, kompensasi suhu tekan titik kerja sing paling optimal sawise kira-kira. 30 menit operasi.
  • Sajrone operasi mode normal, LED kuning D2 sinyal sing output ngoper disetel.
  • Sajrone mode operasi normal, nilai jarak sing diukur ditampilake ing tampilan LED ing mm (nganti 999 mm) utawa cm (saka 100 cm). Skala ngalih kanthi otomatis lan dituduhake dening titik ing ndhuwur digit.
  • Sajrone mode Teach-in, nilai histeresis disetel bali menyang setelan pabrik.
  • Yen ora ana obyek sing diselehake ing zona deteksi, tampilan LED nuduhake »- – -«.
  • Yen ora ana tombol sing ditekan sajrone 20 detik sajrone mode setelan parameter, owah-owahan parameter disimpen lan sensor bali menyang mode operasi normal.
  • Sampeyan bisa ngunci pad tombol kanggo nyedhiyakake input, deleng »Kunci tombol lan setelan pabrik«.
  • Sampeyan bisa ngreset setelan pabrik kapan wae, deleng »Kunci tombol lan setelan pabrik«. Tampilake parameter Nunyuk tombol push T1 sakcepete sajrone mode operasi normal nuduhake »PAR« ing tampilan LED. Saben sampeyan nutul push-tombol T1 setelan nyata output ngoper ditampilake.

Setel paramèter sensor kanthi numerik kanthi nggunakake tampilan LED utawa nganggo prosedur Teach-in

microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-4 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-5

Kunci kunci lan setelan pabrikmicrosonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-6

Fungsi tambahan sing migunani ing menu Add-on (mung kanggo pangguna sing berpengalaman, setelan ora dibutuhake kanggo aplikasi standar)

microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-7

data teknis

microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-8

mic+25

microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-9 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-10 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-15microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-20

mic+35microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-11 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-16 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-21

mic+130microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-12 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-17 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-22

mic+340microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-13 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-18 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-23

mic+600microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-14 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-19 microsonic-10040157-Mic+-Ultrasonic-Sensors-with-One-Switching-Output-fig-24

Bisa diprogram karo TouchControl lan LinkControl 2) Kanthi TouchControl lan LinkControl, setelan filter sing dipilih lan jangkoan maksimal mengaruhi frekuensi ngoper. microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Jerman / T +49 231 975151-0 / F +49 231 975151-51 E info@microsonic.de / W microsonic.de / Isi dokumen iki tundhuk owah-owahan teknis. Spesifikasi ing dokumen iki mung ditampilake kanthi cara deskriptif. Dheweke ora njamin fitur produk apa wae.

Dokumen / Sumber Daya

microsonic 10040157 Mic + Sensor Ultrasonik karo Output Ngoper siji [pdf] Manual pangguna
10040157, Sensor Ultrasonik Mic kanthi Output Ngalih Siji

Referensi

Kiriman sing gegandhengan

Ninggalake komentar

Alamat email sampeyan ora bakal diterbitake. Kolom sing dibutuhake ditandhani *